Hefei Purple Horn E-Commerce Co., Ltd.
| Operating Temperature | -25℃~+85℃ |
| Locking Feature | 抽屉式 |
| Number of Contacts | 13P |
| Pitch | 0.5mm |
| Current Rating | 400mA |
| Voltage Rating (Max) | 50V |
| Contact Type | 下接 |
| Mounting Type | 卧贴 |
| FFC, FCB Thickness | 0.3mm |
| Contact Plating | 锡 |
| Contact Material | 磷青铜 |
| Description | FFC/FPC Connector 13 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃ |
| Mfr. Part # | HX0.5-13P CTXJ-H2.0 119 |
| Package | SMD,P=0.5mm,Surface Mount,Right Angle |
| Model Number | HX0.5-13P CTXJ-H2.0 119 |
View Detail Information
Explore similar products
Flexible Printed Circuit FPC with 1.0mm Pitch Featuring BOOMELE Boom Precision
0.5 Pitch Easy On Type Connector Down Type Right Angle HCTL XW05202-260R-00 with
LCP housing FPC connector Hong Cheng HC-FPC-0.5-8P-FH20 with 8 pins and
Precision Engineered JUSHUO AFC07-S14ECC-00 Connector Suitable for Various
Product Specification
| Operating Temperature | -25℃~+85℃ | Locking Feature | 抽屉式 |
| Number of Contacts | 13P | Pitch | 0.5mm |
| Current Rating | 400mA | Voltage Rating (Max) | 50V |
| Contact Type | 下接 | Mounting Type | 卧贴 |
| FFC, FCB Thickness | 0.3mm | Contact Plating | 锡 |
| Contact Material | 磷青铜 | Description | FFC/FPC Connector 13 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -25℃~+85℃ |
| Mfr. Part # | HX0.5-13P CTXJ-H2.0 119 | Package | SMD,P=0.5mm,Surface Mount,Right Angle |
| Model Number | HX0.5-13P CTXJ-H2.0 119 |
This specification covers the 0.5mm Pitch FPC/FFC Connectors (Part No: HX0.5-13P CTXJ-H2.0 119) from Shenzhen Hanxia Electronic Co., Ltd. These connectors are designed for flexible flat cable applications.
| Item | Condition | Specification/Requirement |
| 3. RATINGS | ||
| Rated Voltage (MAX) | AC/DC (effective value 50Hz) | 50V |
| Rated Current (MAX) | 0.4A | |
| Ambient temperature Range | -25+85 | |
| 4. PERFORMANCE | ||
| 4.1 Electrical Performance | ||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 30 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500M MIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown |
| 4.2 Mechanical Performance | ||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. (n=number of positions) | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute. | 3.92N MIN |
| 4.3 Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX |
| Vibration | DC 1mA energized state; vibration along XYZ axes; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/minute; Duration: 2 hours in each X.Y.Z. axes. | Appearance: No Damage Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX. |
| Shock | DC 1mA energized state; 490m/s2{50G}, 3 strokes in each X.Y.Z. axes. | Appearance: No Damage Discontinuity: 1 ms MAX. |
| Heat Resistance | 852, 96 hours. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Cold Resistance | -402, 96 hours. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Humidity | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours. | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN |
| Temperature Cycling | 5 cycles of: a) -553 30 minutes b) 852 30 minutes | Appearance: No Damage Contact Resistance: 60 m MAX |
| Salt Spray | 24 4 hours exposure to a salt spray from the 51% solution at 352. | Appearance: No Damage, Corrosion Contact Resistance: 60 m MAX |
| SO2 Gas | 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 m MAX |
| NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Appearance: No Damage Contact Resistance: 60 m MAX |
| Solderability | Soldering Time20.5 sec. Soldering Temperature2455 0.2 mm from terminal tip | Solder Wetting: 95% or more |
| Resistance to Soldering Heat | Soldering Time305 sec. Soldering Temperature2455 | Appearance: No Damage, Deformation |
Refer to the drawing for shape, dimensions.
| Name | Materials | Remarks |
| Main body | LCP UL 94V-0 | |
| Housing Lock | LCP UL 94V-0 | |
| Terminal | Phosphor Bronze | Metal surface plated with tin |
| Contact | Phosphor Bronze |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
<300
Ecer Certification：
Verified Supplier
Hefei Purple Horn E-Commerce Co., Ltd. is a professional company focus on integrated circuit ic business. Hefei Purple Horn E-Commerce Co., Ltd. will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Fou... Hefei Purple Horn E-Commerce Co., Ltd. is a professional company focus on integrated circuit ic business. Hefei Purple Horn E-Commerce Co., Ltd. will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Fou...
Get in touch with us
Leave a Message, we will call you back quickly!