Shenzhen ECER Network Technology Co., Ltd.
| Locking Feature | 抽屉式 |
| Operating Temperature | -25℃~+85℃ |
| Number of Contacts | 24P |
| Pitch | 0.5mm |
| Current Rating | 400mA |
| Voltage Rating (Max) | 50V |
| Contact Type | 上接 |
| Mounting Type | 卧贴 |
| FFC, FCB Thickness | 0.3mm |
| Contact Plating | 锡 |
| Contact Material | 磷青铜 |
| Description | FFC/FPC Connector 24 Position 0.5mm Pitch Top Contact Surface Mount, Right Angle -55℃~+85℃ |
| Mfr. Part # | HX 0.5-24P CTSJ-H2.0 |
| Package | SMD,P=0.5mm,Surface Mount,Right Angle |
| Model Number | HX 0.5-24P CTSJ-H2.0 |
View Detail Information
Explore similar products
Flexible Printed Circuit FPC with 1.0mm Pitch Featuring BOOMELE Boom Precision
0.5 Pitch Easy On Type Connector Down Type Right Angle HCTL XW05202-260R-00 with
LCP housing FPC connector Hong Cheng HC-FPC-0.5-8P-FH20 with 8 pins and
Precision Engineered JUSHUO AFC07-S14ECC-00 Connector Suitable for Various
Product Specification
| Locking Feature | 抽屉式 | Operating Temperature | -25℃~+85℃ |
| Number of Contacts | 24P | Pitch | 0.5mm |
| Current Rating | 400mA | Voltage Rating (Max) | 50V |
| Contact Type | 上接 | Mounting Type | 卧贴 |
| FFC, FCB Thickness | 0.3mm | Contact Plating | 锡 |
| Contact Material | 磷青铜 | Description | FFC/FPC Connector 24 Position 0.5mm Pitch Top Contact Surface Mount, Right Angle -55℃~+85℃ |
| Mfr. Part # | HX 0.5-24P CTSJ-H2.0 | Package | SMD,P=0.5mm,Surface Mount,Right Angle |
| Model Number | HX 0.5-24P CTSJ-H2.0 |
This specification covers the 0.5mm Pitch FPC/FFC Connectors (series Locking). Designed for flexible flat cable connections, these connectors offer a reliable and secure locking mechanism.
| Item | Specification | Requirement |
| 3RATINGS | ||
| Rated Voltage(MAX) | 50V [AC/DC( Virtual value)50Hz] | |
| Rated Current(MAX) | 0.5A | |
| Ambient temperature Rang | -25+85 | |
| 4PERFORMANCE | ||
| 4.1 Electrical Performance | ||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit20mV MAX10mA. | 20 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500MMIN |
| Dielectric | Mate applicable FPC/FFC and apply 200V AC virtual value for 1minute between adjacent terminal or ground. | No Breakdown |
| 4.2 Mechanical Performance | ||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. | Locking 1.96*n (N) MAX Withdrawal 0.49*n (N) MIN |
| Terminal /Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute | 3.92N MIN |
| 4.3 Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute | Contact Resistance 60 m MAX |
| Temperature Rise | Carrying rated current load.UL 498 | Temperature Rise 30 MAX |
| Vibration | Amplitude1.5mm P-P Sweep time10-55-10Hz in 1 minute Duration2 hours in each X.Y.Z. axes | Contact Resistance 60 m MAX Discontinuity 1 ms MAX. |
| Shock | 490m/s2{50G}3 strokes in each X.Y.Z. axes. | Appearance No Damage Discontinuity 1 ms MAX. |
| Heat Resistance | 85296 hour | Appearance No Damage Contact Resistance 60 m MAX |
| Cold Resistance | -40296 hour | Appearance No Damage Contact Resistance 60 m MAX |
| Humidity | Temperature402 Relative Humidity90-95% Duration96 Hours | Appearance No Damage Contact Resistance 60 m MAX Dielectric Strength 4.1.3 Must meet 4.1.3 Insulation Resistance 20 M MIN |
| Temperature Cycling | 5 cycles of a) -553 30 minutes b) 852 30 minutes | Appearance No Damage Contact Resistance 60 m MAX |
| Salt Spray | 24 4 hours exposure to a salt spray from the 51% solution at 352. | Appearance No Damage Contact Resistance 60 m MAX |
| SO2 Gas | 24 hours exposure to 505ppm. SO2 gas at 402. | Contact Resistance 60 m MAX |
| NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution | Appearance No Damage Contact Resistance 60 m MAX |
| Solder ability | Soldering Time20.5 sec. Soldering Temperature2455 0.2 mm from terminal tip | Solder Wetting 95% |
| Resistance to Soldering heat | Soldering Time305 sec. Soldering Temperature2455 | Appearance No Damage |
| 5PRODUCT SHAPE,DIMENSIONS AND MATERIALS | ||
| NAME | MATERIALS | Remark |
| Main body | LCP UL 94V-0 | |
| Housing Lock | LCP UL 94V-0 | |
| Sit uip | Phosphor Bronze | |
| Contact | Phosphor Bronze | |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!