Shenzhen ECER Network Technology Co., Ltd.
| Locking Feature | 抽屉式 |
| Operating Temperature | -25℃~+85℃ |
| Number of Contacts | 30P |
| Pitch | 1mm |
| Voltage Rating (Max) | 50V |
| Contact Type | 下接 |
| Mounting Type | 卧贴 |
| FFC, FCB Thickness | 0.3mm |
| Contact Plating | 锡 |
| Contact Material | 磷青铜 |
| Description | FFC/FPC Connector 30 Position 1mm Pitch Bottom Contact Surface Mount, Right Angle -55℃~+85℃ |
| Mfr. Part # | 1.0-30P CTXJ-H2.5 119 |
| Package | SMD,P=1mm,Surface Mount,Right Angle |
| Model Number | 1.0-30P CTXJ-H2.5 119 |
View Detail Information
Explore similar products
Flexible Printed Circuit FPC with 1.0mm Pitch Featuring BOOMELE Boom Precision
0.5 Pitch Easy On Type Connector Down Type Right Angle HCTL XW05202-260R-00 with
LCP housing FPC connector Hong Cheng HC-FPC-0.5-8P-FH20 with 8 pins and
Precision Engineered JUSHUO AFC07-S14ECC-00 Connector Suitable for Various
Product Specification
| Locking Feature | 抽屉式 | Operating Temperature | -25℃~+85℃ |
| Number of Contacts | 30P | Pitch | 1mm |
| Voltage Rating (Max) | 50V | Contact Type | 下接 |
| Mounting Type | 卧贴 | FFC, FCB Thickness | 0.3mm |
| Contact Plating | 锡 | Contact Material | 磷青铜 |
| Description | FFC/FPC Connector 30 Position 1mm Pitch Bottom Contact Surface Mount, Right Angle -55℃~+85℃ | Mfr. Part # | 1.0-30P CTXJ-H2.5 119 |
| Package | SMD,P=1mm,Surface Mount,Right Angle | Model Number | 1.0-30P CTXJ-H2.5 119 |
This specification covers the 1.0mm Pitch FPC/FFC Connectors. Designed for flexible flat cable connections, these connectors are suitable for applications requiring reliable electrical and mechanical performance within a specified temperature range. They are manufactured by Shenzhen Shouhan Technology Co., Ltd.
| Item | Specification | Requirement |
|---|---|---|
| Product Identification | ||
| Product Name | FFC/FPC | FFC/FPC Flat Cable Connector |
| Part Number | 1.0-30P CTXJ-H2.5 119 | 1.0-30P CTXJ-H2.5 119 |
| Material Code | 1.0-30P CTXJ-H2.5 119 | 1.0-30P CTXJ-H2.5 119 |
| Ratings | ||
| Rated Voltage (MAX) | AC/DC (Virtual value) 50Hz | 50V |
| Rated Current (MAX) | 0.5A | |
| Ambient Temperature Range | -25+85 | |
| Electrical Performance | ||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 30 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. | 500M MIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 250V AC (Virtual value) for 1 minute between adjacent terminals or ground. | No Breakdown |
| Mechanical Performance | ||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. (n = number of positions) | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal / Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute | 0.25N MIN |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX |
| Vibration | Under DC 1mA current; vibrate along XYZ three directions; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz in 1 minute; Duration: 2 hours in each X, Y, Z axes. | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX. Appearance: No Damage |
| Shock | Under DC 1mA current; 490m/s {50G}, 3 strokes in each X, Y, Z axes. | Discontinuity: 1 ms MAX. Appearance: No Damage |
| Heat Resistance | Mate applicable FPC/FFC; placed in 852 air for 96 hours; then returned to room temperature for 1-2 hours. | Contact Resistance: 60 m MAX Appearance: No Damage |
| Cold Resistance | Mate applicable FPC/FFC; placed in -402 air for 96 hours; then returned to room temperature for 1-2 hours. | Contact Resistance: 60 m MAX Appearance: No Damage |
| Humidity | Mate applicable FPC/FFC; placed in 402, 90-95% RH air for 96 hours; measured within 0.5 hours after returning to room temperature. | Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN Appearance: No Damage |
| Temperature Cycling | 5 cycles of: a) -553 30 minutes, b) 852 30 minutes. (with 10-15 minutes at room temp. between cycles) | Contact Resistance: 60 m MAX Appearance: No Damage |
| Salt Spray | Mate applicable FPC/FFC; 244 hours exposure to a salt spray from the 51% solution at 352. After test, rinse with water at room temperature and dry. | Contact Resistance: 60 m MAX Appearance: No Damage, Corrosion |
| SO2 Gas | Mate applicable FPC/FFC; 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 m MAX |
| NH3 Gas | Mate applicable FPC/FFC; 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Contact Resistance: 60 m MAX Appearance: No Damage |
| Solder Ability | Soldering Time: 20.5 sec. Soldering Temperature: 2455. 0.2 mm from terminal tip. | Solder Wetting: 95% or more |
| Resistance to Soldering Heat | Soldering Time: 305 sec. Soldering Temperature: 2455. Performed at least 5 times. | Appearance: No Damage, Deformation |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!