Shenzhen ECER Network Technology Co., Ltd.
| Locking Feature | 抽屉式 |
| Operating Temperature | -25℃~+85℃ |
| Number of Contacts | 40P |
| Pitch | 0.5mm |
| Voltage Rating (Max) | 50V |
| Contact Type | 下接 |
| Mounting Type | 卧贴 |
| FFC, FCB Thickness | 0.3mm |
| Contact Plating | 锡 |
| Contact Material | 磷青铜 |
| Description | FFC/FPC Connector 40 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -55℃~+85℃ |
| Mfr. Part # | 0.5-40P CTXJ-H2.0 119 |
| Package | SMD,P=0.5mm,Surface Mount,Right Angle |
| Model Number | 0.5-40P CTXJ-H2.0 119 |
View Detail Information
Explore similar products
Flexible Printed Circuit FPC with 1.0mm Pitch Featuring BOOMELE Boom Precision
0.5 Pitch Easy On Type Connector Down Type Right Angle HCTL XW05202-260R-00 with
LCP housing FPC connector Hong Cheng HC-FPC-0.5-8P-FH20 with 8 pins and
Precision Engineered JUSHUO AFC07-S14ECC-00 Connector Suitable for Various
Product Specification
| Locking Feature | 抽屉式 | Operating Temperature | -25℃~+85℃ |
| Number of Contacts | 40P | Pitch | 0.5mm |
| Voltage Rating (Max) | 50V | Contact Type | 下接 |
| Mounting Type | 卧贴 | FFC, FCB Thickness | 0.3mm |
| Contact Plating | 锡 | Contact Material | 磷青铜 |
| Description | FFC/FPC Connector 40 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -55℃~+85℃ | Mfr. Part # | 0.5-40P CTXJ-H2.0 119 |
| Package | SMD,P=0.5mm,Surface Mount,Right Angle | Model Number | 0.5-40P CTXJ-H2.0 119 |
The 0.5mm Pitch FPC/FFC Connector is designed for flexible flat cable connections. This connector offers a rated voltage of 50V AC/DC and a rated current of 0.5A, operating reliably within an ambient temperature range of -25 to +85. It is suitable for applications requiring secure and stable connections for FPC/FFC cables, with robust performance under various environmental and mechanical stresses.
| Item | Specification/Requirement | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 50V [AC/DC (Virtual value) 50Hz] | |
| Rated Current (MAX) | 0.5A | |
| Ambient Temperature Range | -25+85 | |
| Electrical Performance | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 250V AC (Virtual value) for 1 minute between adjacent terminals or ground. |
| Mechanical Performance | ||
| Locking and Withdrawal Force | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | Insert and extract applicable FFC (0.3mm thickness) at a speed of 253mm/minute. |
| Terminal/Housing Retention Force | 0.25N MIN | Pull the terminal outwards at a speed of 25 3mm per minute. |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal up to 20 cycles at a speed of less than 10 cycles/minute (no power). |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498). |
| Vibration | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX. Appearance: No Damage | Under DC 1mA, vibrate along XYZ axes: Amplitude 1.5mm P-P, Sweep time 10-55-10Hz/min, Duration 2 hours in each axis. |
| Shock | Appearance: No Damage Discontinuity: 1 ms MAX. | Under DC 1mA, 490m/s {50G} shock, 3 strokes in each of the 6 directions. |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | Place in 852 air for 96 hours, then return to room temperature for 1-2 hours. |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | Place in -402 air for 96 hours, then return to room temperature for 1-2 hours. |
| Humidity | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN | Place in 402, 90-95% RH air for 96 hours, measure within 0.5 hours after returning to room temperature. |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60 m MAX | 5 cycles of: -553 for 30 minutes, then 852 for 30 minutes, with 10-15 minutes at room temperature in between. |
| Salt Spray | Appearance: No Damage, Corrosion Contact Resistance: 60 m MAX | 244 hours exposure to 51% salt spray at 352. Wash with room temperature water after test and dry at room temperature. |
| SO2 Gas | Contact Resistance: 60 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas | Appearance: No Damage Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solderability | Solder Wetting: 95% or more coverage | Immerse 0.2mm from terminal tip into a 2455 tin bath for 20.5 sec. |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation | In a 2455 hot air oven for 305 sec, performed at least 5 times. |
Product Name: FFC/FPC Flat Cable Connector
Part Number: CTXJ-H2.0 0.5-40P
Company: SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD
Contact: Tel: 0755-27597601, Fax: 0755-27597491
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!