Shenzhen ECER Network Technology Co., Ltd.
| Locking Feature | 抽屉式 |
| Operating Temperature | -25℃~+85℃ |
| Number of Contacts | 8P |
| Pitch | 0.5mm |
| Voltage Rating (Max) | 50V |
| Contact Type | 单侧触点/垂直 |
| Mounting Type | 立贴 |
| FFC, FCB Thickness | 0.3mm |
| Contact Plating | 锡 |
| Contact Material | 磷青铜 |
| Description | FFC/FPC Connector 8 Position 0.5mm Pitch Top Contact Surface Mount -25℃~+85℃ |
| Mfr. Part # | FPC 0.5-8P LTH2.0 |
| Package | SMD,P=0.5mm(Staggered Pins) |
| Model Number | FPC 0.5-8P LTH2.0 |
View Detail Information
Explore similar products
Flexible Printed Circuit FPC with 1.0mm Pitch Featuring BOOMELE Boom Precision
0.5 Pitch Easy On Type Connector Down Type Right Angle HCTL XW05202-260R-00 with
LCP housing FPC connector Hong Cheng HC-FPC-0.5-8P-FH20 with 8 pins and
Precision Engineered JUSHUO AFC07-S14ECC-00 Connector Suitable for Various
Product Specification
| Locking Feature | 抽屉式 | Operating Temperature | -25℃~+85℃ |
| Number of Contacts | 8P | Pitch | 0.5mm |
| Voltage Rating (Max) | 50V | Contact Type | 单侧触点/垂直 |
| Mounting Type | 立贴 | FFC, FCB Thickness | 0.3mm |
| Contact Plating | 锡 | Contact Material | 磷青铜 |
| Description | FFC/FPC Connector 8 Position 0.5mm Pitch Top Contact Surface Mount -25℃~+85℃ | Mfr. Part # | FPC 0.5-8P LTH2.0 |
| Package | SMD,P=0.5mm(Staggered Pins) | Model Number | FPC 0.5-8P LTH2.0 |
This specification covers the 0.5mm Pitch FPC/FFC Connectors from Shenzhen Shouhan Technology Co., Ltd. Designed for flexible flat cable connections, these connectors offer reliable electrical and mechanical performance across a wide operating temperature range. They are suitable for applications requiring secure locking and withdrawal forces, with robust resistance to environmental factors such as vibration, shock, heat, cold, humidity, and corrosive gases.
| Item | Specification/Requirement | Test Condition |
|---|---|---|
| Product Name & Part Number | ||
| Product Name | FFC/FPC Flat Cable Connector | |
| Part Number | 0.5-8P LTH2.0 | |
| Ratings | ||
| Rated Voltage (MAX) | 50V [AC/DC (Virtual value) 50Hz] | |
| Rated Current (MAX) | 0.5A | |
| Ambient Temperature Range | -25+85 | |
| Performance - Electrical | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminals or ground. |
| Performance - Mechanical | ||
| Locking and Withdrawal Force | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | Insert and extract applicable FFC (0.3mm thickness) at a speed rate of 253mm/minute. |
| Terminal/Housing Retention Force | 3.92N MIN | Pull the terminal at a speed rate of 25 3mm per minute. |
| Performance - Environmental and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal up to 20 cycles at a speed rate of less than 10 cycles/minute (no power). |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498). |
| Vibration | Appearance: No Damage Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX. | Under DC 1mA energization; Vibration amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X, Y, Z axes. |
| Shock | Appearance: No Damage Discontinuity: 1 ms MAX. | Under DC 1mA energization; 490m/s {50G}, 3 strokes in each X, Y, Z axes. |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | Mate applicable FPC/FFC; Place in 852 air for 96 hours, then return to room temperature for 1-2 hours. |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | Mate applicable FPC/FFC; Place in -402 air for 96 hours, then return to room temperature for 1-2 hours. |
| Humidity | Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN | Temperature: 402; Relative Humidity: 90-95%; Duration: 96 Hours. Measurement within 0.5 hours after returning to room temperature. |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60 m MAX | 5 cycles of: a) -553 for 30 minutes; b) 852 for 30 minutes; with 10-15 minutes at room temperature between cycles. |
| Salt Spray | Appearance: No Damage, No Corrosion Contact Resistance: 60 m MAX | 48 4 hours exposure to a salt spray from a 51% solution at 352. Post-test wash with room temperature water and dry. |
| SO2 Gas Resistance | Contact Resistance: 60 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas Resistance | Appearance: No Damage Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solderability | Solder Wetting: 95% coverage | Soldering Time: 20.5 sec. Soldering Temperature: 2455 Immersion depth: 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, No Deformation | Soldering Time: 305 sec. Soldering Temperature: 2455 (hot air furnace); at least 5 times. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!