Shenzhen ECER Network Technology Co., Ltd.
| Locking Feature | 抽屉式 |
| Operating Temperature | -25℃~+85℃ |
| Number of Contacts | 16P |
| Pitch | 1mm |
| Voltage Rating (Max) | 50V |
| Contact Type | 下接 |
| Mounting Type | 卧贴 |
| FFC, FCB Thickness | 0.3mm |
| Contact Plating | 锡 |
| Contact Material | 磷青铜 |
| Description | FFC/FPC Connector 16 Position 1mm Pitch Bottom Contact Surface Mount, Right Angle -55℃~+85℃ |
| Mfr. Part # | 1.0-16P CTXJ-H2.5 119 |
| Package | SMD,P=1mm,Surface Mount,Right Angle |
| Model Number | 1.0-16P CTXJ-H2.5 119 |
View Detail Information
Explore similar products
Flexible Printed Circuit FPC with 1.0mm Pitch Featuring BOOMELE Boom Precision
0.5 Pitch Easy On Type Connector Down Type Right Angle HCTL XW05202-260R-00 with
LCP housing FPC connector Hong Cheng HC-FPC-0.5-8P-FH20 with 8 pins and
Precision Engineered JUSHUO AFC07-S14ECC-00 Connector Suitable for Various
Product Specification
| Locking Feature | 抽屉式 | Operating Temperature | -25℃~+85℃ |
| Number of Contacts | 16P | Pitch | 1mm |
| Voltage Rating (Max) | 50V | Contact Type | 下接 |
| Mounting Type | 卧贴 | FFC, FCB Thickness | 0.3mm |
| Contact Plating | 锡 | Contact Material | 磷青铜 |
| Description | FFC/FPC Connector 16 Position 1mm Pitch Bottom Contact Surface Mount, Right Angle -55℃~+85℃ | Mfr. Part # | 1.0-16P CTXJ-H2.5 119 |
| Package | SMD,P=1mm,Surface Mount,Right Angle | Model Number | 1.0-16P CTXJ-H2.5 119 |
The SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD 1.0-16P CTXJ-H2.5 119 is a 1.0mm pitch FPC/FFC connector designed for flexible flat cable connections. It offers reliable electrical and mechanical performance suitable for various industrial applications.
| Item | Specification/Requirement | Test Condition |
|---|---|---|
| Ratings | ||
| Rated Voltage (MAX) | 50V (AC/DC Virtual Value 50Hz) | |
| Rated Current (MAX) | 0.5A | |
| Ambient Temperature Range | -25+85 | |
| Performance - Electrical Performance | ||
| Contact Resistance | 30 m | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500 M | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 250V AC (Virtual Value) for 1 minute between adjacent terminals or ground. |
| Performance - Mechanical Performance | ||
| Locking Force | 1.96*n (N) | Insert and extract applicable 0.3mm thick FFC at a speed rate of 253mm/minute. |
| Withdrawal Force | 0.49*n (N) | |
| Terminal/Housing Retention Force | 0.25N | Pull the terminal at the speed rate of 25 3mm per minute. |
| Performance - Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance 60 m | Insertion and withdrawal actuator up to 20 cycles at a speed rate of less than 10 cycles/minute, without power. |
| Temperature Rise | 30 | Carrying rated current load (UL 498). |
| Vibration | Contact Resistance 60 m, Discontinuity 1 ms | Under DC 1mA, amplitude 1.5mm P-P, sweep time 10-55-10Hz/min, duration 2 hours in each X, Y, Z axes. |
| Shock | Appearance: No Damage, Discontinuity 1 ms | Under DC 1mA, 490m/s {50G}, 3 strokes in each X, Y, Z axes. |
| Heat Resistance | Appearance: No Damage, Contact Resistance 60 m | 852, 96 hours, then return to room temperature for 1-2 hours. |
| Cold Resistance | Appearance: No Damage, Contact Resistance 60 m | -402, 96 hours, then return to room temperature for 1-2 hours. |
| Humidity | Appearance: No Damage, Contact Resistance 60 m, Dielectric Strength: Must meet 4.1.3, Insulation Resistance 20 M | 402, 90-95% Relative Humidity, 96 hours, then measured within 0.5 hours at room temperature. |
| Temperature Cycling | Appearance: No Damage, Contact Resistance 60 m | 5 cycles of: a) -553 30 minutes, b) 852 30 minutes, with 10-15 minutes at room temperature and humidity between cycles. |
| Salt Spray | Appearance: No Damage, Corrosion, Contact Resistance 60 m | 244 hours exposure to a salt spray from a 51% solution at 352. Post-test: rinse with water at room temperature and dry. |
| SO2 Gas Resistance | Contact Resistance 60 m | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas Resistance | Appearance: No Damage, Contact Resistance 60 m | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solderability | Solder Wetting 95% | Soldering Time: 20.5 sec. Soldering Temperature: 2455, 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation | Soldering Time: 305 sec. Soldering Temperature: 2455, at least 5 times. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!