Shenzhen ECER Network Technology Co., Ltd.
| Locking Feature | 抽屉式 |
| Operating Temperature | -25℃~+85℃ |
| Number of Contacts | 11P |
| Pitch | 1mm |
| Voltage Rating (Max) | 50V |
| Contact Type | 下接 |
| Mounting Type | 卧贴 |
| FFC, FCB Thickness | 0.3mm |
| Contact Plating | 锡 |
| Contact Material | 磷青铜 |
| Description | FFC/FPC Connector 11 Position 1mm Pitch Bottom Contact Surface Mount, Right Angle -55℃~+85℃ |
| Mfr. Part # | 1.0-11P CTXJ-H2.5 119 |
| Package | SMD,P=1mm,Surface Mount,Right Angle |
| Model Number | 1.0-11P CTXJ-H2.5 119 |
View Detail Information
Explore similar products
Flexible Printed Circuit FPC with 1.0mm Pitch Featuring BOOMELE Boom Precision
0.5 Pitch Easy On Type Connector Down Type Right Angle HCTL XW05202-260R-00 with
LCP housing FPC connector Hong Cheng HC-FPC-0.5-8P-FH20 with 8 pins and
Precision Engineered JUSHUO AFC07-S14ECC-00 Connector Suitable for Various
Product Specification
| Locking Feature | 抽屉式 | Operating Temperature | -25℃~+85℃ |
| Number of Contacts | 11P | Pitch | 1mm |
| Voltage Rating (Max) | 50V | Contact Type | 下接 |
| Mounting Type | 卧贴 | FFC, FCB Thickness | 0.3mm |
| Contact Plating | 锡 | Contact Material | 磷青铜 |
| Description | FFC/FPC Connector 11 Position 1mm Pitch Bottom Contact Surface Mount, Right Angle -55℃~+85℃ | Mfr. Part # | 1.0-11P CTXJ-H2.5 119 |
| Package | SMD,P=1mm,Surface Mount,Right Angle | Model Number | 1.0-11P CTXJ-H2.5 119 |
This specification covers the 1.0mm Pitch FPC/FFC Connectors manufactured by Shenzhen Shouhan Technology Co., Ltd. These connectors are designed for flexible flat cable applications, offering reliable electrical and mechanical performance within a defined operating temperature range.
| Item | Specification/Requirement | Test Condition |
|---|---|---|
| Product Name and Part Number | ||
| Product Name | FFC/FPC Flat Cable Connector | |
| Part Number | 1.0-11P CTXJ-H2.5 119 | |
| Material Code | 1.0-11P CTXJ-H2.5 119 | |
| Ratings | ||
| Rated Voltage (MAX) | 50V AC/DC (Virtual value 50Hz) | |
| Rated Current (MAX) | 0.5A | |
| Ambient Temperature Range | -25+85 | |
| Electrical Performance | ||
| Contact Resistance | 30 m MAX | Mate applicable FPC/FFC; open circuit voltage 20mV MAX; short circuit current 10mA. |
| Insulation Resistance | 500M MIN | Mate applicable FPC/FFC; apply 500V DC between adjacent terminals or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC; apply 250V AC (virtual value) for 1 minute between adjacent terminals or ground. |
| Mechanical Performance | ||
| Locking and Withdrawal Force | Locking: 1.96*n (N) MAX; Withdrawal: 0.49*n (N) MIN | For 0.3mm thick FFC; insert and extract at a speed of 253mm/minute. 'n' represents the number of positions. |
| Terminal/Housing Retention Force | 0.25N MIN | Pull the terminal outwards at a speed of 25 3mm per minute. |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insert and withdraw actuator up to 20 cycles at a speed of less than 10 cycles/minute (no power). |
| Temperature Rise | 30 MAX | Carry rated current load (UL 498). |
| Vibration | Contact Resistance: 60 m MAX; Discontinuity: 1 ms MAX. Appearance: No Damage | Under DC 1mA; vibrate along XYZ axes with amplitude 1.5mm; frequency sweep 10-55-10Hz/min; duration 2 hours in each axis. |
| Shock | Appearance: No Damage; Discontinuity: 1 ms MAX. | Under DC 1mA; 490m/s {50G} shock in 6 directions perpendicular to the mating axis; 3 strokes each. |
| Heat Resistance | Appearance: No Damage; Contact Resistance: 60 m MAX | Mate applicable FPC/FFC; place in 852 air for 96 hours; then return to room temperature for 1-2 hours. |
| Cold Resistance | Appearance: No Damage; Contact Resistance: 60 m MAX | Mate applicable FPC/FFC; place in -402 air for 96 hours; then return to room temperature for 1-2 hours. |
| Humidity | Appearance: No Damage; Contact Resistance: 60 m MAX; Dielectric Strength: Must meet 4.1.3; Insulation Resistance: 20 M MIN | Temperature: 402; Relative Humidity: 90-95%; Duration: 96 Hours; measure within 0.5 hours after returning to room temperature. |
| Temperature Cycling | Appearance: No Damage; Contact Resistance: 60 m MAX | 5 cycles of: a) -553 for 30 minutes; b) 852 for 30 minutes; with 10-15 minutes at room temperature and humidity between cycles. |
| Salt Spray | Appearance: No Damage, No Corrosion; Contact Resistance: 60 m MAX | 244 hours exposure to a 51% salt spray solution at 352. Wash with room temperature water after test and dry at room temperature. |
| SO2 Gas Resistance | Contact Resistance: 60 m MAX | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas Resistance | Appearance: No Damage; Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solderability | Solder Wetting: 95% or more coverage | Soldering Time: 20.5 sec; Soldering Temperature: 2455; immersion 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, No Deformation | Soldering Time: 305 sec; Soldering Temperature: 2455; perform at least 5 times. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!