Shenzhen ECER Network Technology Co., Ltd.
| Reference Series | VL |
| Number of PINs | 2 |
| Type | 固定器 |
| Description | 2 Through Hole,P=6.2mm Circular Connector Accessories RoHS |
| Mfr. Part # | HC-VL-2S-05 |
| Package | Through Hole,P=6.2mm |
| Model Number | HC-VL-2S-05 |
View Detail Information
Explore similar products
Wire to Board Connector DLL XAD-4S Featuring 250 Millimeter Pitch and Compliance
DLL PAD 10S wire to board connector featuring RoHS compliance and environmentall
6.2mm pitch wire to board and wire to wire connectors DLL VL-2S for industrial
CAT6 CAT5E cable termination with Stewart Connector Qwik RJ45 modular plugs Bel
Product Specification
| Reference Series | VL | Number of PINs | 2 |
| Type | 固定器 | Description | 2 Through Hole,P=6.2mm Circular Connector Accessories RoHS |
| Mfr. Part # | HC-VL-2S-05 | Package | Through Hole,P=6.2mm |
| Model Number | HC-VL-2S-05 |
This specification covers the 6.20mm pitch VL connector, double row type, designed for various electrical applications. It details product performance, test methods, and inspection requirements.
| Section | Item | Description/Requirement | Test Mode |
| 3. USE CONDITION | Ambient temperature Range | -40 105 | |
| 3. USE CONDITION | Applicable Wire Sizes | AWG #1222 | |
| 3. USE CONDITION | Applicable PC board thickness | 1.6mm | |
| 4. Appearance and Dimension | Appearance | Product surface without defect, dirt, crack, and mechanical damage; Contact without rust plating, oxidation, or peeling. | |
| 4. Appearance and Dimension | Dimension | According to drawings | |
| 4. Appearance and Dimension | Exchangeable | Exchangeable with same specification products. | |
| 5. Material | Terminal Contact () | Phosphor bronze, 0.25mm thick, Tin plating | |
| 5. Material | Housing Plastic () | Nylon66, UL94V-0(2), Color: Nature | |
| 6. Electrical Performance | Rated Current | 20A AC/DC | |
| 6. Electrical Performance | Rated Voltage | 600V AC/DC | |
| 6. Electrical Performance | Contact Resistance | Initial value 20m | Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance |
| 6. Electrical Performance | Insulation Resistance | 1000 M | Apply 2000V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors |
| 6. Electrical Performance | Withstand voltage | No breakdown or flashover | A maximum voltage of 20mV and maximum current of 100mA are applied to the mate connector (Does not include wire resistance) |
| 7. Mechanical Performance | Single contact insertion force | 20N | Housing together with terminal ends with wafer matched at a rate per minute to 253mm inserting force test |
| 7. Mechanical Performance | Single contact Withdrawal force | 4N | Housing together with terminal ends with wafer matched at a rate per minute to 253mm withdrawing force test |
| 7. Mechanical Performance | Terminal crimping Wire strength | 50N (AWG#12) | Terminal crimping wire axial per minute to 253mm rate of the pullout force |
| 7. Mechanical Performance | Seat pull-out force | 30N | Exerts a force on the pin end at a rate per minute 253mm until the needle exit Seat pull-out force |
| 7. Mechanical Performance | Pin Retention Force | 30N (AWG#12) | |
| 7. Mechanical Performance | Vibration | Current Discontinuity: Max 1 sec; Contact Resistance: 40m; Appearance: No damage | Amplitude: 1.5mm p-p; Frequency: 10-55-10 Hz/minute; Period: 2 hours for each direction (X, Y, Z axis) |
| 7. Mechanical Performance | Durability | Contact Resistance: 40m; Appearance: No damage | Mate connectors up 30 cycles at a Maximum rate of 10 cycles per minute prior to environmental test |
| 8. Endurance Characteristics | Thermal Aging | Contact Resistance: 40m; Appearance: No damage | Temperature: 852; Period: 96 hours continuously |
| 8. Endurance Characteristics | Temperature rise | (Value not specified) | Mate connector measure the temperature rise of contact when the maximum rated current is passed |
| 8. Endurance Characteristics | Constant Humidity | Contact Resistance: 40m; Insulation Resistance: 1000 M; Appearance: No damage | Temperature: 402 C; Relative humidity: 90-95% (RH); Period: 96 hours continuously |
| 8. Endurance Characteristics | Temperature cycling | Contact Resistance: 40m; Insulation Resistance: 1000 M; Withstand voltage: No breakdown or flashover; Appearance: No damage | One cycle: -403C 30min, room temp 10-15min; 1053C 30min, room temp 10-15min; Total cycle: 5 cycles |
| 8. Endurance Characteristics | Salt spray | Contact Resistance: 40m; Appearance: No damage | Temperature: 353 C; Concentration: 51%; Period: 24 hours (Stamping before tin plated) or 8 hours (Stamping after tin plated) |
| 8. Endurance Characteristics | Solder ability | Area of soldering: 90%; Appearance: No damage | Solder temperature: 2603C; Immersion period: 3 0.5S |
| 8. Endurance Characteristics | Wave soldering tin soldering process | Appearance: No damage | Soldering temperature: 2603; Soldering time: 30.5S |
| 8. Endurance Characteristics | Manual soldering tin process | Appearance: No damage | Soldering pot: 3505; Soldering time: 30.5S |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!