Shenzhen ECER Network Technology Co., Ltd.
| Connector Type | Board Side |
| RF Series | IPEX |
| Number of Ports | 1 |
| Interface | Male Pin |
| Description | 1 Male Pin IPEX Board Side -40℃~+90℃ 50Ω 2mm SMD Coaxial Connector (RF) Assemblies RoHS |
| Impedance | 50Ω |
| Delivery Time | 7-14工作日 |
| Operating Temperature | -40℃~+90℃ |
| Packaging Details | SMD |
| Stock | 50000 |
| Interface Diameter | 2mm |
| Model Number | IF-0203 |
| Brand Name | IF-0203 |
View Detail Information
Explore similar products
Samtec GRF7-J-P-02-GF-RA-TH1-E
Samtec SMP-PS-P-HH-ST-EM3
HenryTech HLY-SMA-KFD-K4-2
Amphenol SMB1251B1-3GT30G-50
Product Specification
| Connector Type | Board Side | RF Series | IPEX |
| Number of Ports | 1 | Interface | Male Pin |
| Description | 1 Male Pin IPEX Board Side -40℃~+90℃ 50Ω 2mm SMD Coaxial Connector (RF) Assemblies RoHS | Impedance | 50Ω |
| Delivery Time | 7-14工作日 | Operating Temperature | -40℃~+90℃ |
| Packaging Details | SMD | Stock | 50000 |
| Interface Diameter | 2mm | Model Number | IF-0203 |
| Brand Name | IF-0203 |
This product is a SMT Type Micro Coaxial RF Receptacle, part name USS RF REC. It serves as a micro strip-to-Coaxial adapter in RF circuits. Applications include Mobile Phones, Wireless Networks, Mini PCI, Bluetooth, PDAs, GPS, and Electric Measurement Instruments.
SPEC-1001
RF BOARD END CONNECTOR
A
| Item | Test Conditions | Specifications |
|---|---|---|
| 1. Contact Resistance | Signal contact Initial: 20 mV MAX, 10 mA MAX. After testing: R20 mmax. Ground contact Initial: 20m MAX. After testing: R20 mMAX. | Initial: 20m MAX |
| 2. Insulation Resistance | Mate receptacle and plug, apply DC 100V between signal and ground. | Initial: 500M MIN, After testing: 100 M MIN |
| 3. Dielectric Withstanding Voltage | Mate receptacle and plug, apply AC 200V rms for 1 minute. | No creeping discharge, flashover, or insulator breakdown. |
| 4. VSWR | Measure using network analyzer. | 1.3MAX. at 0.1~3GHz, 1.4MAX. at 3~6GHz |
| 5. Un-mating force | Solder receptacle to test board, mate plug. Measure at 253mm/minutes. | Initial: 4N MIN, After 30 cycles: 2N MIN |
| 6. Crimp strength | Pull cable at 25 3mm/minutes by tensile strength machine. | 8N MIN |
| 7. Durability | Mate and un-mate 30 cycles at 253 mm/minutes. | Appearance: No abnormality. Contact Resistance: Shall meet Table I.1. |
| 8. Contact resistance with force on the cable | Apply force on cable, run 100mA DC. | Appearance: No abnormality. Electrical discontinuity: No discontinuity > 1s. Contact Resistance: Shall meet Table I.1. |
| 9. Vibration | Frequency: 10Hz 100 Hz 10Hz/approx 20 minutes. Half amplitude: 1.5mm or 59m/s(6G). 3 cycles per direction for 3 mutually perpendicular directions. Run 100mA DC. | Appearance: No abnormality. Contact Resistance: Shall meet Table I.1. Electrical discontinuity: No discontinuity > 1s. |
| 10. Shock | Peak acceleration: 735 m/s(75G). Duration: 11msec. Wave Form: half sinusoidal. 3 cycles per direction for 6 mutually perpendicular directions. Run 100mA DC. | Appearance: No abnormality. Contact Resistance: Shall meet Table I.1. Electrical discontinuity: No discontinuity > 1s. |
| 11. Humidity (Steady State) | 3132K (402), 9095%RH, 96 hours. | Appearance: No abnormality. Contact Resistance: Shall meet Table I.1. Insulation Resistance: Shall meet Table I.2. Dielectric Withstanding Voltage: Shall meet Table I.3. |
| 12. Thermal Shock | 218K (-55) 358K(85): 30min. Transition time: 5min MAX. 5 cycles. | Appearance: No abnormality. Contact Resistance: Shall meet Table I.1. Insulation Resistance: Shall meet Table I.2. Dielectric Withstanding Voltage: Shall meet Table I.3. |
| 13. High Temperature Life | 3632K (902), 96 hours. | Appearance: No abnormality. Contact Resistance: Shall meet Table I.1. Insulation Resistance: Shall meet Table I.2. Dielectric Withstanding Voltage: (Not specified) |
| 14. H2S Gas | 3132K (402), 805%RH, 96 hours. | Appearance: No abnormality. Contact Resistance: Shall meet Table I.1. Insulation Resistance: Shall meet Table I.2. Dielectric Withstanding Voltage: (Not specified) |
| 15. Salt Water Spray | 3082K (352), 9598%RH, 51%(by weight) salt water density, 96 hours. | Appearance: No abnormality. Contact Resistance: Shall meet Table I.1. |
| 16. Solder ability | Dip solder tine in solder bath at 5185K(2455) for 50.5seconds after flux immersion. | More than 95% wet surface, less than 5% pinhole. |
| 17. Soldering Heat Resistance | Reflow part: 533+0/-5K(260+0/-5) Peak 498K MIN. (225MIN) 70sce.MIN. Pre-heat part: 433443K(160170) 80100sec. Max 2 reflow times. | No abnormality adversely affecting performance. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!