WENZHOU SANTUO ELECTRICAL CO.,LTD.
| Supply Ability | 3000PCS/DAYS |
| Delivery Time | 15DAYS |
| Packaging Details | 100pcs/ctns |
| In | 6,10,16,20,25,32,40A |
| Install | Din Rail |
| Brand | SONTUOEC |
| Type | Electrical |
| Model | A, AC |
| Breaking Capacity | 6KA |
| name | rcbo device |
| size | 18mm width RCBO 2P |
| Brand Name | SONTUOEC , WZSTC |
| Model Number | STRO-40L |
| Certification | CE,CB |
| Place of Origin | Wenzhou, China |
View Detail Information
Explore similar products
6KA 4.5KA 18mm width 1P+N Single Phase Electrical Type RCBO Circuit Breaker 40A
Electrical RCBO 40A AC 230 Earth Leakage Circuit Breaker single phase ELCB
Electronic 6KA Residual Current Circuit Breaker With Overcurrent Protection 2P /
C40 White 4 Pole RCBO , IP20 Residual Current Breaker With Overload Protection
Product Specification
| Supply Ability | 3000PCS/DAYS | Delivery Time | 15DAYS |
| Packaging Details | 100pcs/ctns | In | 6,10,16,20,25,32,40A |
| Install | Din Rail | Brand | SONTUOEC |
| Type | Electrical | Model | A, AC |
| Breaking Capacity | 6KA | name | rcbo device |
| size | 18mm width RCBO 2P | Brand Name | SONTUOEC , WZSTC |
| Model Number | STRO-40L | Certification | CE,CB |
| Place of Origin | Wenzhou, China | ||
| High Light | 6KA RCBO Circuit Breaker ，18MM RCBO Circuit Breaker ，Overcurrent Protection RCBO Circuit Breaker | ||
SONTUOEC Economic type 18mm width residual current circuit breaker is in conformity with the standards of IEC61009.It is 6KA short circuit design ; It can cut off the fault circuit immediately on the occasion of shock hazard or earth leakage of trunkline.Thus it is suitable to avoid the shock hazard and fire caused by earth leakage.It can be used in circuits up to single phase 230V,three phase 400V,50 or 60Hz.
Normal working & installment conditions
1.Ambient temperature: -5ºC~+40ºC, 24 hours average temperature not exceed +35ºC.
2.Installment plance altitude: ≤2000m
3.Gas relative humidity:not exceed 50% at +40ºC, higher humidity allowed at lower temperature.
4.Pollution degree: 2 class
5.Installment condition: Mounted in the place without obvious impact or shock, no dangerous(explosion) dielectric without corrosive metal or damaging isolation gas(conductive dust).
6.Installment method: TH35-7.5 mounted rail, can be installed in distribution board, case or box. Generally mounted vertically. Tilted angle between mounting face and vertical face not exceed ±5°.
7.Mounted Category: II,III class.
| Sandard | IEC/EN61009-1 | ||
| Electrical features | Type(wave form of the earth leakage sensed) | Electronic type | |
| Rated current In | A | A,AC | |
| Poles | P | 1P+N | |
| Rated voltage | V | AC 230 | |
| Rated Current : | 6,10,16,20,25,32,40A | ||
| Rated sensitivity I△n | A | 0.01,0.03,0.1,0.3,0.5 | |
| Insulation voltage Ui | V | 500 | |
| Rated residual making and breaking capacity I△m | A | 630 | |
| Short-circuit current I△c | A | 6000 | |
| SCPD fuse | A |
| |
| Rated frequency | Hz | 50/60 | |
| Pollution degree | 2 | ||
| Mechanical features | Electrical life | t | 4000 |
| Mechanical life | t | 10000 | |
| Protection degree | IP20 | ||
| Ambient temperature (with daily average ≤35℃) | ℃ | -25~+40 | |
| Storage temperature | ℃ | -25~+70 | |
| Installation | Terminal connection type | Cable/U-type busbar/pin-type busbar | |
| Terminal size top/bottom for cable | mm2 | 25 | |
| AWG | 18-3 | ||
| Terminal size top/bottom for busbar | mm2 | 25 | |
| AWG | 18-3 | ||
| Tightening torque | N*m | 2.5 | |
| In-lbs | 22 | ||
| Mounting | On DIN rail EN 60715(35mm)by means of fast clip device | ||
| Connection | From top and bottom | ||
Construction features
1. Measuring component and buckling component of products is located between enter line end and entrance line end ;
2. Movement characteristic of products can not be changed with outside mechanical tool ;
3.The operating organization has the free function to take off and buckle;
4. Operate part can not be taken down from the shell outer of products ,the shell can not influence the operating organization to work, the accessory group which replace the feelers pressure ,should guarantee the feelers pressure does not change while running .
5. Overall and mounting dimensioned chart.
Wenzhou Santuo Electrical Co.,Ltd. Browse Categories
RCBO Circuit Breaker
RCCB Circuit Breaker
MCB Circuit Breaker
MCCB Circuit Breaker
ELCB Circuit Breaker
AC Contactor
Magnetic Contactor
Air Conditioning Contactors
Thermal Overload Relay
Magnetic Starter
Electrical Isolator Switch
Company Details
Business Type:
Manufacturer,Exporter,Trading Company
Year Established:
2005
Total Annual:
350-500
Employee Number:
50~100
Ecer Certification：
Site Member
WENZHOU SANTUO ELECTRICAL Co., Ltd.(Before:YUEQING SHANTUO ELECTRICAL CO.,LTD.) is one of manufactories that specialize in manufacturing Circuit Breaker, AC CONTACTOR, Thermall Relay,Magnetic Starter(DOL),Solid State Relay,Distribution Case, Voltage Regulator is located in Liushi, Wenzhou... WENZHOU SANTUO ELECTRICAL Co., Ltd.(Before:YUEQING SHANTUO ELECTRICAL CO.,LTD.) is one of manufactories that specialize in manufacturing Circuit Breaker, AC CONTACTOR, Thermall Relay,Magnetic Starter(DOL),Solid State Relay,Distribution Case, Voltage Regulator is located in Liushi, Wenzhou...
Get in touch with us
Leave a Message, we will call you back quickly!