FFG Flexo Printing Folding Gluer Case Making Machine Automatic Glue Supply

Product Specification

Flexo Folding Gluer Carton Production Line

Max running speed:350m/min

Max packaging speed:20packages/min

Features of equipment:

• Introduction
• 1. All paper conveying belts can be moved independently. The paper conveying belts are equipped with paper pressing wheels, fans, and brushes to clean up the waste paper to the greatest extent. Guide wheel device, upper and lower belt clamping transmission. Electric left and right walking, easy to adjust the size
• 2. Gluing wheel: Made of stainless steel, more durable and corrosion-resistant. The glue hopper is equipped with linear guides, making position adjustment more convenient and accurate.
• 3. Folding part: The main function is to fold the carton down, and use the correction plate to correct the pressure line for the second time to fold the carton into a standard box.
• 4. For molding cleaning, if the scraping part and folding part have not been cleaned up, the waste paper scraps will be cleaned again.

• 5. Pat the parts together: Pat the points together, and push them out with an accurate number through counting light, counting, and correction.
• 6. Output part: After pushing out, the above paper holder presses smoothly for output.

         Mechanical configuration of packaging department:

           (1), Taizhou Haoli reducer

           (2), AirTAC cylinder, solenoid valve

           (3), Guangdong Duffy power transmission shaft

           (4), Bearing Harbin

          Electrical configuration:

           (1), Panasonic PLC

           (2), Siemens contactor

           (3), Schneider button

           (4), switching power supply: Taiwan MEAN WELL

           (5), Photoelectric switch Beifuning

           (6), Relay Omron

           (7) Human-machine interface Kunlun Tongtai

• 8. Control panel; adopts PLC control and has functions such as zeroing and memory. (PLC combined with touch screen control can be selected)
• 9. The controller panel for each action of the machine controls the left and right movement, the rise and fall of the paper platen, etc.

Machine parts selection:

1. Automatic glue supply, circulating glue, never glue break, no need to manually add glue, saving time and effort. Suitable for all kinds of glue.

2. Stainless steel glue coating wheel, corrosion-resistant, wear-resistant, glue coating evenly, saving glue, the amount of glue used is about one-third of the amount of manual glue coating.

3. The folding part is equipped with an adjustable multi-pass pressing wheel set, which makes the carton folding smoother and the gluing more beautiful and accurate.

4. The counting section corrects the carton stacking, and the stacking and output are safe, stable, accurate and error-free. It is digitally controlled and easy to operate. It can be input without stopping the machine.

Machine parameter

The maximum speed: 320 meters/minute

Maximum number of packages launched: 20 packages

Maximum cardboard size: 700mm*500mm

Minimum cardboard size: 195mm*105mm

Maximum width of cardboard (including swing cover): 1100mm

Minimum width of cardboard (including swing cover): 240mm

Maximum stacking height: 350mm

Minimum stacking height: 80mm

Maximum quantity per pack: 50 pcs

Minimum quantity per package: 10 pcs

Belt: Siglin (China-Germany joint venture)

For the marked areas in the picture, pay attention to regular refueling and maintenance "once every half a month" to ensure the normal operation of the machine and a longer service life of the machine.

Foundation diagram

Attachment

Safe operation:

1. Before taking up work, you must wear work clothes and work shoes, fasten the buttons and cuffs, and do not put items in your pockets     that are easy to fall.

2. After the crew arrives at work, check that there are no people or debris within the operating range of the equipment. The protective           cover on the equipment must be intact and not loose.

3. Before starting the equipment, the bell should ring and the alarm should be sounded. Only after re-confirming that no one is in the             operating range of the equipment can it be started up.

4. When the equipment is in operation, it is strictly forbidden to touch all operating working surfaces with hands, and maintenance and            wiping work are not allowed. It is not allowed to cross the running parts.

5. Crew members should strictly adhere to their posts according to the division of labor, and are prohibited from skipping posts or leaving      their posts without permission. They should always pay attention to the operation of the equipment.

6. When the equipment is in operation, it is strictly forbidden to touch all operating working surfaces with hands, and maintenance and            wiping work are not allowed. It is not allowed to cross the running parts.

7. Crew members should strictly adhere to their posts according to the division of labor, and are prohibited from skipping posts or leaving      their posts without permission. They should always pay attention to the operation of the equipment.

                If an abnormality is found, shut down the machine immediately.

            8. When working, no one is allowed to play around the equipment or make loud noises.

9. During the work process, the work place should be kept clean and smooth. Make sure there is no clutter around the device. Tools and        parts should be placed in designated locations.

10. The operator of this machine should be familiar with the functions and locations of the main buttons of the equipment. If an accident          occurs, anyone can press the emergency stop switch.