Wuxi jia Miao Technology Co.ltd
| Model NO. | JZ-230 |
| Motor Power | 5.5 Kw |
| Power | 3-Phase 4-Wire 380V 50/60Hz |
| Speed | 0-1450 Rpm |
| Rail Pressure | 0-2200 Bar |
| Rail Pressure Precision | 5 Bar |
| Filter Precision | < 5 Um |
| Tank Volume | 18 L |
| Fuel Temperature | 38-42 'c |
| Net Weight | 330 Kg |
| Metering Way | Flow Sensor |
| Dimensions | 1200*820*1550 mm |
| Speed Control | Converter Control |
| Temperature Control | Air-Cooled Heat Dissipation |
| Nozzle Sensor | Imported Original Elliptical Type Flow Sensor |
View Detail Information
Explore similar products
DPF SCR DOC Intelligent Regeneration Furnace
JZ-206 Common Rail Pizeo Fuel 4 Pin Injector Machine Test Bench
JZ-326A Professional Precision EUI EUP Injector Pump Test Bench
JZ-518 Multifunctional Function Common Rail Pump EUI EUP Injector Code BPI Test
Product Specification
| Model NO. | JZ-230 | Motor Power | 5.5 Kw |
| Power | 3-Phase 4-Wire 380V 50/60Hz | Speed | 0-1450 Rpm |
| Rail Pressure | 0-2200 Bar | Rail Pressure Precision | 5 Bar |
| Filter Precision | < 5 Um | Tank Volume | 18 L |
| Fuel Temperature | 38-42 'c | Net Weight | 330 Kg |
| Metering Way | Flow Sensor | Dimensions | 1200*820*1550 mm |
| Speed Control | Converter Control | Temperature Control | Air-Cooled Heat Dissipation |
| Nozzle Sensor | Imported Original Elliptical Type Flow Sensor | ||
| High Light | Full Automatic Control Common Rail Injector Test Bench ，0-2200 Bar Rail Pressure Diesel Injector Test Bench ，5.5 Kw Motor Power Multi Functional Test Bench | ||
| 1. Integrated flow sensor | 11. Can test piezo injectors |
| 2. Full-automatic Fully function | 12. Can test common rail injectors |
| 3. With electronic measuring system | 13. Linear calibration of flow sensor |
| 4. Accurate data Multiple protection | 14. Oil level lower limit alarm |
| 5. Prepositioned precise filter for sensor | 15. Real-time display the fuel delivery graph |
| 6. Intelligent algorithm Automatic calibration | 16. Many language interfaces can be switche |
| 7. Automatically heating/cooling control for test oil | 17. Opening pressure and flow rate of oil nozzle |
| 8. Bosch CP3 pump and high pressure oil rail with DRV | 18. Data backup, software update and cloud upgradable functions |
| 9. Bosch datas are from the orginal equipment of EPS708 | 19. Function debugging can be realized under different conditions |
| 10. Denso, Delphi, Siemens data are calibrated from the latest injectors | 20. Test items: preheating emptying; tightness; full load; fuel return; discharge volume; pre-injection volume; idle oil volume |
| Hardware advantage |
| 1. Motor power is 5.5 KW |
| 2. Air-cooled heat dissipation kit |
| 3. Metering valve detect the fuel flow |
| 4. Imported flow sensor from Germany |
| 5. Equipped with Bosch genuine DRV |
| 6. Equipped with Bosch genuine CP3 pump |
| 7. Equipped with Bosch genuine common rail tube |
| 8. Oil tank (including heating,refrigeration,liquid level detection,temperature detection) |
| 9. Short-circuit protection, ground protection, over-pressure protection during the testing |
| 10. Equipped frequency converter to achieve testing function under different speed conditions |
| 11. Equipped precise filter before flow sensor, which can effectively keep the sensor clean and extend the flow sensor usage life |
| Software advantage |
| 1. More than 3000 test data used for different brands injectors and pumps calibrations |
| 2. Data backup, system software and database upgrade free charge all the time (by remote) |
| 3. Automatic testing the fuel quantity of all working conditions, automatic generate report after testing |
| 4. Automatic test injectors under different working conditions, automatic analysis results, and generate report after testing |
| 5. Intelligent algorithm is used to automatically calibrate the fuel quantity of the new injector, and generate reports after testing |
| Technical Parameters | |
| Output | 5.5 KW |
| Power | 3-Phase 4-Wire 380V 50/60HZ |
| Speed | 0~1450 RPM |
| Rail Pressure | 0~2200 Bar |
| Rail Pressure Precision | ±5 Bar |
| Tank Volume | 18 L |
| Fuel Temperature | 40±2ºC |
| Filter Precision | < 5μm |
| Gross Weight | 400 kg |
| Packing Size | 1390×1000×1560 mm |
| Speed Control Model | Converter Control |
| Temperature Control System | Air-Cooled Heat Dissipation |
| Nozzle Sensor | Imported Original Elliptical Type Flow Sensor |
| Language | English, Spanish, Russian,etc |
| Material | Metal Plate |
| Painting | Powder Painting, Durable |
| Color | Green (can be customized) |
| Logo | Jing Zheng Hong Ye (can be customized) |
| MOQ | 1 Piece |
| Payment | 40%Deposit, the rest paid before delivery |
| Warranty Time | 12 months |
| Delivery time | 30 days after prepaid |
| Shipping Packing | Wooden Case |
Company Details
Business Type:
Manufacturer
Year Established:
2013
Employee Number:
100~200
Ecer Certification：
Verified Supplier
Wuxi Jia Miao Technology Co.,ltd. Founded in 2013, located in No.149 Xinzhuang Road, Zhutang Town Wuxi City, Jiangsu Province, China. Close to Shanghai and Wuxi high-speed rail station. We are a high-tech enterprise engaged in the R&D manufacturing and sales services of the diesel engine fuel ... Wuxi Jia Miao Technology Co.,ltd. Founded in 2013, located in No.149 Xinzhuang Road, Zhutang Town Wuxi City, Jiangsu Province, China. Close to Shanghai and Wuxi high-speed rail station. We are a high-tech enterprise engaged in the R&D manufacturing and sales services of the diesel engine fuel ...
Get in touch with us
Leave a Message, we will call you back quickly!