CME Technology Co., Ltd.
| Payment Terms | T/T |
| Supply Ability | |
| Delivery Time | |
| Brand Name | CME |
| Model Number | KRD11 |
| Certification | |
| Place of Origin |
View Detail Information
Explore similar products
High Speed Shock Test equipment/Pneumatic Vertical Shock Tester
KRD17 Pneumatic Bidirectional Vertical Shock Test System
High-frequency Pneumatic Bump Test Machine
MIL-S-901D standard High Impact Shock Test Machine
Product Specification
| Payment Terms | T/T | Supply Ability | |
| Delivery Time | Brand Name | CME | |
| Model Number | KRD11 | Certification | |
| Place of Origin |
KRD11 series pneumatic vertical shock test system is suitable for evaluating the functional reliability and structural integrity of various products under shock or bump environments, thereby improving or optimizing the structural design or layout of the products. The system meets the requirements of both shock and bump test, can perform conventional half-sine wave, post-peak sawtooth wave, trapezoid wave and other waveform shock tests.
l Pneumatic drive, simple structure and high reliability
l Pollution free, without hydraulic leak risk and keep the environment clean.
l Pneumatic drive greatly improves the shock test efficiency, maximum shock rate up to 120 times/ min.
l It can easily realize large pulse width and small overload test.
l With a fast shock rate comparing to motor or hydraulic driven table, it has higher reliability and better bump waveform.
l The speed and rate of shock can be easily controlled by adjusting the gas pressure.
l IPS-2000 shock control and measurement system can perform manual shock, continuous shock, single shock, and interval shock.
l Built-in brake mechanism ensures the safety of operation in any situation.
Foundation-free, the cement floor shall be leveled and the working distance of 800 ~ 1000mm shall be reserved around the equipment
Technical Specifications
|
Model Parameters |
KRD 11－5 |
KRD 11－15 |
KRD 11－25 |
KRD 11－50 |
KRD 11－100 |
KRD 11－200 |
KRD 11－400 |
KRD 11－600 |
KRD 11－800 |
KRD 11－1000 |
KRD 11－2000 |
|
|
Rated Load (kg) |
5 |
15 |
25 |
50 |
100 |
200 |
400 |
600 |
800 |
1000 |
2000 |
|
|
Table Size (mm) |
150×150 |
200×200 |
300×300 |
500×500 |
600×600 |
800×600 |
800×800 |
1000×800 |
1000×1000 |
1200×1200 |
1500×1200 |
|
|
Peak Acc. (g) |
Half-Sine |
5-2.5k |
5-2k |
5-1500 |
10-750 |
10-600 |
10-450 |
10-400 |
10-300 |
10～300 |
10～250 |
10～150 |
|
Post-Peak Sawtooth |
10-200 |
10-100 |
10-50 |
|||||||||
|
Trapezoid |
\ |
15-200 |
15-100 |
15-60 |
15-50 |
|||||||
|
Pulse Duration (ms) |
Half-Sine |
0.5～40 |
1～40 |
0.6～60 |
1.5～60 |
2～60 |
2.5～60 |
3～60 |
3.5～60 |
4～60 |
4.5～60 |
6～60 |
|
Post-Peak Sawtooth |
3～18 |
6～18 |
||||||||||
|
Trapezoid |
\ |
3～18 |
6～18 |
|||||||||
|
Bump Waveform |
Half sine wave |
|||||||||||
|
Bump Peak Acceleration （g） |
4~150 |
5～100 |
||||||||||
|
Bump Pulse Duration (ms) |
2~30 |
3~30 |
||||||||||
|
Overall Dimension (mm) |
1000×1000 ×2100 |
1200×1000 ×2200 |
1400×1200 ×2300 |
1600×1400 ×2300 |
1700×1500 ×2300 |
1700×1500 ×2300 |
1900×1500 ×2450 |
1900×1500 ×2450 |
2000×1500 ×2450 |
1900×1800 ×2550 |
2200×1800 ×2550 |
|
|
Weight (kg) |
1300 |
2300 |
3000 |
4000 |
4500 |
4500 |
5000 |
5200 |
5600 |
6200 |
7300 |
|
|
Bump Rate (Times/Min) |
10~120 |
|||||||||||
|
Condition |
Environment |
Temperature range 0 ~ 40℃; Humidity ≤ 80%, non-condense |
||||||||||
|
Power |
AC220V±10%, 50Hz |
|||||||||||
|
Air source |
≤0.8MPa |
|||||||||||
|
Floor |
Foundation-free, the cement floor shall be leveled and the working distance
of 800 ~ 1000mm shall be reserved around the equipment |
|||||||||||
|
Standards |
MIL-STD-810F IEC68-2-27 MIL-STD-202 MIL-STD-750 MIL-STD-883 UN38.3 IEC62281 IEC62133-2 UL2054 IEEE1625 SAEJ2929 IEC62660-2 ISO12405-3 UL2580 |
|||||||||||
Company Details
Ecer Certification：
Site Member
CME Technology Co., Ltd. is located in Shaanxi National Development Zone, specializing in manufacturing equipment for mechanical testing and simulation, environmental reliability testing,non-standard testing. Our products including shock test system, drop tester, hydraulic shakers, multi-DOF motion ... CME Technology Co., Ltd. is located in Shaanxi National Development Zone, specializing in manufacturing equipment for mechanical testing and simulation, environmental reliability testing,non-standard testing. Our products including shock test system, drop tester, hydraulic shakers, multi-DOF motion ...
Get in touch with us
Leave a Message, we will call you back quickly!