ABS Approved Copper Nickel 70/30 Eccentric Reducer Fitting with Butt Weld Ends

Product Specification

ABS Approved Copper Nickel 70/30 Eccentric Reducer Fittings for Offshore Platform

1.Product Description

The Copper Nickel Reducer Fitting is a functional component designed for diameter transition in piping systems, manufactured from copper-nickel corrosion-resistant alloys. Primary grades include 90/10 type (UNS C70600, BFe10-1-1) and 70/30 type (UNS C71500, B30). The fitting is produced through a sequence of processes including material cutting, heating, forging, machining, heat treatment, and surface finishing, resulting in a precisely tapered internal bore. Based on the relationship of flow-path centerlines, the product is divided into Concentric Reducers (coincident centerlines) and Eccentric Reducers (parallel but offset centerlines). The concentric configuration is intended for vertical risers or pump suction/discharge positions requiring precise center alignment; the eccentric configuration is designed for horizontal pipelines, maintaining a continuous flat bottom to facilitate liquid drainage or pigging operations. The products comply with ASME B16.9, DIN 86089, EEMUA146, and GB/T 12459, with end connections supplied in butt-weld, socket-weld, threaded, or flanged types according to customer requirements.

2.Product Applications

Owing to its excellent resistance to seawater and chemical corrosion, this product finds wide application in the following key industries and scenarios:

• Waterborne transportation and offshore engineering equipment – used in fire-water systems, seawater cooling systems, ballast tank filling/drainage lines, and fresh water generator support piping aboard large ocean-going bulk carriers, chemical tankers, LNG carriers, and offshore oil/gas production platforms.

• Desalination and water resource recovery facilities – applied in low-temperature multi-effect distillation, multi-stage flash evaporation, and reverse-osmosis desalination projects for intake systems, pre-treatment units, energy-recovery device connections, and brine discharge lines.

• Power station auxiliary systems – supplied to circulating water systems, closed industrial cooling water systems, condenser cleaning devices, and auxiliary cooling circuits at coastal coal-fired stations, nuclear plants, and gas-turbine power stations.

• Refinery and chemical process units – suitable for overhead condenser piping, air-cooler inlet/outlet connections, and caustic wash/water wash sections in delayed coking, fluid catalytic cracking, and hydrotreating units.

• Municipal water supply and wastewater treatment systems – serving as diameter-transition elements in urban water distribution networks, secondary water supply facilities, large-scale wastewater treatment plants, and reclaimed water reuse projects.

• Commercial and industrial refrigeration/air-conditioning systems – used for diameter-change connections in large water-chiller units, cooling-tower piping, ice-storage systems, and industrial-grade refrigeration stations.

3.Product Advantages

• Strong general corrosion resistance – copper-nickel alloys exhibit low uniform corrosion rates in seawater and most neutral salt solutions, with annual penetration depths controllable within a very narrow range, suitable for extended maintenance-free operation.

• Stable localized corrosion performance – the addition of nickel effectively enhances resistance to pitting and crevice corrosion, particularly beneficial for areas prone to deposit accumulation or gasket contact surfaces where concentration cells may develop.

• Prominent erosion resistance – the material possesses adequate hardness combined with appropriate ductility, demonstrating excellent resistance to abrasive wear in high-velocity fluids containing sand or debris, maintaining smooth internal surfaces without groove formation.

• Biofouling inhibition function – continuous copper-ion release under wet conditions creates a natural bio-deterrent layer, significantly reducing flow losses and heat-transfer deterioration caused by marine organism attachment.

• High weld-joint reliability – using matching filler metals and standardized welding procedures, grain growth in the heat-affected zone is controlled, with weld corrosion resistance essentially matching that of the parent metal, ensuring overall pipeline service life.

• Extended service life benefit – under identical operating conditions, the service life of this alloy fitting is multiple times longer than that of ordinary carbon steel and galvanized products, reducing unplanned shutdowns and replacement-related production losses.

• Comprehensive standard compliance – all products are designed, manufactured, and inspected in strict accordance with internationally recognized standards, with full traceability meeting most engineering procurement specifications.

​

​4.Key Product Specifications

FAQ

1. Are you trading company or manufacturer ? We are manufacturer ,You can see the certification.

2.How long is your delivery time? Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

3. Do you provide samples ? is it free or extra ? Yes, we could offer the sample for free charge but need pay the cost of freight.

4. What is your terms of payment ? Payment<=1000USD, 100% in advance. Payment>=1000USD, 50% T/T in advance ,balance before shippment.