China World Technology Battery Service Group
| Payment Terms | T/T,Western Union,PayPal |
| Packaging Details | Carton Package |
| Product Name: | Disposable batteries |
| PN: | CR1734 |
| Cell type: | Li-MnO₂ battery |
| Condition: | Original |
| Voltage: | 3V |
| Discharge current: | Continuous discharge ≤200mA |
| Cycle life: | Disposable |
| Shipping by: | DHL & FedEx |
| Storage lifespan: | 36 months |
| Weight: | About 10g |
| Size: | 17*35mm |
View Detail Information
Explore similar products
Corrosion Resistant Overcharge Resistant No Memory Effect Ni-MH Battery
12V 2.8Ah LiMnO2 Medical Batteries Rechargeable 4-07-0001 HYB 18-0075 For
Rechargeable Li-ion Battery NT-LI4S1P-PA for ECG Patient Monitor 14.8V 38.48Wh
Inogen One G4 BA-408 14.4V 6.5Ah 93.6Wh Rechargeable Lithium Ion Medical Battery
Product Specification
| Payment Terms | T/T,Western Union,PayPal | Packaging Details | Carton Package |
| Product Name: | Disposable batteries | PN: | CR1734 |
| Cell type: | Li-MnO₂ battery | Condition: | Original |
| Voltage: | 3V | Discharge current: | Continuous discharge ≤200mA |
| Cycle life: | Disposable | Shipping by: | DHL & FedEx |
| Storage lifespan: | 36 months | Weight: | About 10g |
| Size: | 17*35mm | ||
| High Light | 3V Defibrillator Battery ，CR17345 AED Battery ，36 Months Storage Lifespan Medical Battery | ||
Zoll original AED Plus Type 123 Lith CR17345 3V Battery for Defibrillators
This is an original battery designed specifically for the ZOLL AED Plus automated external defibrillator. It is a Li-MnO₂ disposable battery, model CR17345, with a voltage of 3V. This battery is only compatible with the ZOLL AED Plus defibrillator, uses a 10-cell series design, supports instantaneous high-current discharge, and can meet the instantaneous high-power requirements of the defibrillator during emergency situations.
Procurement and Backup Recommendations
1. When purchasing in bulk, prioritize verifying "device model matching".
Only select Type 123 CR17345 batteries labeled "For AED Plus" to avoid generic Type 123 batteries;
2. Spare Battery Storage
Store spare batteries separately from the AED Plus, maintaining a storage temperature between 10℃ and 25℃, away from heat and water sources;
3. Usage Cycle Management
Establish a "Battery Replacement Record Sheet". Replace batteries based on either "18 months after installation" or "low battery warning during self-test", regardless of the battery's expiration date;
4. Post-Emergency Battery Disposal
Even if a single emergency uses only one defibrillation, it is recommended to replace the battery with a new one, as the pulse discharge during defibrillation significantly depletes battery capacity, and the remaining power may not be sufficient for the next emergency.
| Product name | Disposable lithium manganese batteries |
| PN | CR1734 |
| Cell type | Li-MnO₂ |
| Voltage | 3V |
| Discharge current | Continuous discharge ≤200mA |
| Cycle life | Disposable |
| Storage lifespan | 36 months |
| Size | 17*35mm |
| Weight | About 10g |
Q1: When using the AED Plus defibrillator with this battery, the screen displays "Low Battery," but the battery is not expired. What could be causing this?
A1: This could be due to oxidation of the battery compartment contacts or improper battery installation. Check the battery compartment for oxidation, wipe the contacts with a cotton swab dampened with alcohol, and reinstall the battery. If the error persists, it is recommended to replace the battery.
Q2: The AED defibrillator battery depletes quickly after defibrillation. What could be causing this?
A2: This could be due to natural battery capacity degradation, the battery nearing its expiration date, or the device being in standby mode for an extended period before defibrillation. It is recommended to trigger a self-check once a month when the AED Plus is not in use to reduce unnecessary power consumption. After emergency treatment, replace the battery with a new one regardless of the remaining charge to ensure sufficient power for the next backup.
Q3: In low-temperature environments, the AED Plus experiences a delay in powering on after battery installation. How can this be improved?
A3: Low temperatures reduce the activity of lithium batteries, causing a delay in voltage output. Before installation, you can preheat the battery in an insulated bag for 5 minutes; or after installing the battery, delay starting the device for 3-5 seconds to allow time for the battery voltage output.
Company Details
Ecer Certification：
Verified Supplier
China World Technology Battery Service Group: Powering the Future with Premium Batteries Company History The history of China World Technology Battery Service Group can be traced back to early 2015, when the company was relatively small and only focused on producing basic lead-acid batteries. Due ... China World Technology Battery Service Group: Powering the Future with Premium Batteries Company History The history of China World Technology Battery Service Group can be traced back to early 2015, when the company was relatively small and only focused on producing basic lead-acid batteries. Due ...
Get in touch with us
Leave a Message, we will call you back quickly!