7.4V 2600mAh Syringe Pump Battery Mindray SP1 SP3D Ex SK-801 SK-803 EX VP3 SP3

Product Specification

Mindray SP1 SP3D Ex SK-801 SK-803 EX VP3 SP3 7.4V 2600mAh Compatible Battery Syringe Pump Battery

►Brief Description

Battery usage:

1. After receiving the battery, try to calibrate the new battery. The new battery should be charged for 6-12 hours and then discharged to 5-10%. Repeat 2 to 3 times. This fully activates the lithium ion and achieves maximum capacity.
2. Under normal use, when the battery is discharged to 5%, the device should be turned off and charged. It is strictly forbidden to discharge the battery to 0%, as this will damage the battery and accelerate its wear.
3. Batteries that are not used for a long time should be charged to at least 70% and stored for no more than three months.
4. Please use dedicated equipment for charging.
5. If the battery cannot be charged normally, it does not necessarily mean that the battery is defective. The normal function of the battery may be affected by the motherboard, power supply, system, ambient temperature, etc.
6. If the battery cannot be recognized, it may be that the connection between the battery connector and the computer jack is loose. At this time, you need to check whether the copper plate of the battery terminal is exposed.
7. Do not use the battery in an overheated or overcold environment.

Steps to start the battery:

When the device charges the battery for the first time, due to different voltages and unstable current, the device will stop charging when the battery is half charged (sometimes more, sometimes less). In this case, don't worry. Just remove the battery from the device, reinsert it and charge it. A new battery may take several charging cycles for the first time; this is normal.

► Specification

Looking forward to your early inquiry,if you are interested Mindray SP1 SP3D Ex SK-801 SK-803 EX VP3 SP3 7.4V 2600mAh Compatible Battery Syringe Pump Battery,please feel free to contact us,thanks.