Robot Joint Connector Arm Kit 6061-T6 Aluminum Interchangeable Assembly 0.01mm

A Kit That Behaves Like a Kit

Most connector "sets" are a box of parts that happen to ship together. This one is built as an interface: the arm, the adapter ring, the dowel pins and the fasteners share one datum plan and one tolerance chain, and every part carries a laser part number tied to the kit serial. Order the same part number a year later and it still fits the arm you bought, because the programme and the datum plan do not change between batches.

That matters most in service. If an arm is damaged on a robot that is already running, you do not re-engineer a replacement — you quote the part number and serial, and the new arm arrives at the same interface geometry. Spares are orderable individually for exactly this reason.

Tolerance Chain, Then Machining

We start by doing the stack-up arithmetic, because a kit fails on the interface, not on the individual part.

Precision Capability

Custom Kits

Content is defined by your assembly. Kits are quoted line by line, so items can be added or removed without re-quoting the whole set.

• Components: connector arm, adapter ring, dowel pins, bushings, cap screws, shims, seal rings
• Configurations: dual flange, single flange with lugs, angled flange, offset flange, multi-axis joint body
• Materials: 6061-T6, 6082-T6, 7075-T6, 2024-T351, 304/316L stainless, 4140 steel on request
• Features: central cable opening, sensor lugs, cable channels, keyways, dowel pairs, threaded inserts
• Kit sizes from 2 to 30 components, with BOM, spare list and assembly sequence notes
• Serial tracking so a replacement part can be ordered by kit number years later
• Input formats: STEP, IGES, X_T, STL, DXF, 2D drawing with GD&T, or a sample for scanning and rebuild

Confidentiality

The Plant

Dongguan Changxinda Precision Technology Co., Ltd has machined custom parts since 2008. The floor runs 4-axis and 5-axis machining centres, turn-mill combination lathes, CNC lathes and milling machines, backed by an ISO 9001:2015 quality system and an in-house CMM room. More than 200 customers in medical equipment, robotics, automotive, aerospace, automation, laser, LED, lithium battery and precision instruments are supplied from this plant, and 50-60% of output is exported. Kitting, serial tracking and dry assembly checks are part of normal production here.

Delivery

• Capacity around 10,000 pieces per month for this kit family
• Repeat kits reuse the same programme and datum plan; spare parts match the installed kit
• Each kit allocated across two machining centres to protect your date
• Express, air and sea freight; EXW, FOB or CIF terms; components bagged and labelled by part number
• Rush capacity for line-down situations, including single spare arms, quoted with a date we can hold

Key Features

• Kit built on one datum plan, not assembled from separate jobs
• Worst-case stack-up reviewed before quotation
• 0.01 mm arm-to-adapter interface fit, verified assembled
• Dowel holes reamed and honed, pin gauged individually
• Mating flanges flat to 0.005 mm
• Dry assembly check on every kit, before and after treatment
• Laser part numbers and kit serial for spare-part reordering
• NDA-protected handling and project-code documentation

Typical Applications

• Robot shoulder, elbow and wrist interface kits
• Collaborative robot arm joint assemblies
• Gantry and pick-and-place connector sets
• Semiconductor handling arm interfaces
• Medical and laboratory robot linkages
• Automation module quick-change interfaces
• Test rig adapter kits
• Field retrofit and upgrade kits

FAQ

Q: Can I order a single replacement arm later?
A: Yes. Quote the kit serial and part number; the arm is cut from the same programme and checked against the recorded interface dimensions.

Q: What does interchangeable within 0.01 mm mean in practice?
A: Any arm from the same kit series seats on the adapter with the same fit and the same dowel engagement, so a spare does not need fitting on site.

Q: Will you sign an NDA before we send the assembly?
A: A mutual NDA is signed first, covering drawings, models, scans, samples and BOM details.

Q: Do you supply the dowels and fasteners?
A: We can supply the full kit including dowels, screws and shims, or machine the metal parts to your own hardware list. Both are quoted line by line.

Q: What is the minimum order?
A: One kit, with no tooling charge and no programming fee.

Q: Can you match an existing kit already in service?
A: Send the drawing or a sample. We rebuild the model, measure the interface and quote against measured geometry, so a new kit drops into the same assembly.

Q: What do you need to quote?
A: Assembly drawing or STEP, component list, interface tolerances, quantity and target date. Quote and stack-up notes return within 24 hours.

Related Parts From The Same Plant

• Robot Arm Linkage Set 6061-T6 Aluminum Mirrored Pair Weight Matched 0.005mm Bore Coaxial
• Robot Joint Connecting Arm Dual Bearing Housing 6082-T6 Aluminum Press Fit Select 0.008mm
• Robot Tooling Fixture Set 6061 Aluminum Locating Blocks Clamps Ground 0.01mm Hole Pitch