7N7748 7C7582 176-0389 8N1441 3306 Turbo K18 Shaft

Product Specification

7N7748 7C7582 176 - 0389 8N1441 Excavator Turbocharger For 3306 Engine

The turbocharger should be inspected every 7000 - 7500 hours for abnormal vibration or noise. Any issues that are noticed would point to a problem with the turbo’s internal bearings. Don’t worry though, a quick inspection of the condition of the bearings can be accomplished without completely disassembling the turbocharger. To inspect the bearings you can remove the piping from the turbocharger and inspecting the compressor impeller, turbine wheel and compressor cover. Once you have inspected the condition of those parts rotate the compressor and turbine wheel assembly by hand and get a feel for excess end play and radial clearance. The rotating assembly should move without any restrictions which includes any rubbing or binding up in one particular spot. If you feel the impeller is rubbing against the inside of the compressor cover or the turbine wheel is grinding against the inside of the turbine housing, pull a part the entire turbo as the bearings are shot or simply replace the turbo.

FAQ

Q: Do you have stock for the goods?
A: We have plenty stock for many items in the warehouse.

Q.What is your business scope

A. Complete Engine

B. Cylinder Head

C. Cylinder Block

D. Crankshaft & Camshaft

E. Liner Kit

F. Connecting Rod & Bearing

G. Water & Oil Pump

H. Turbocharger

I. Hydraulic Pump & Parts

J. Slewing bearing

K. Undercarriage

L. Hydraulic cylinder assy & adjust cylinder assy with spring.

M. Travel & Swing Gear Parts

N. L. Rubber & Other Parts

Q. Which countries have you exported?

ASIA: Iraq, UAE, Turkey, Thailand, Malaysia, Indonesia, Vietnam, Bangladesh, Kuwait, Lebanon

EUROPE: Russia, Kazakhstan, Greece, Norway, Ireland

OCEANIA: Australia, Fiji, Kiribati, New Caledonia

AMERICAS: Canada, Jamaica, Brazil, Peru, Chile,

AFRICA: Angola, South Africa, Kenya, Tanzania, Zambia, Sudan, South Sudan, Egypt, Algeri, Nigeria

Q: How can I get a quotation?
A: A complete quotation based on the details as follows in your inquiry:
1. Part No. 2.Engine model 3.Machinery model 4. Description and size

Picture. 6.. Quantity 6. Other requirements, such as Packing, Shipping and so on.

Q: 4. When can you deliver after sending deposit?
It depends on your order quantity, if we have stock then need about 3~10 working days get it ready, if no stock we will start to produce when the deposite received. Usually it takes 15-60 days for different items.

Q: How do you pack the goods?
We have 20 years experience on export, finished products will be carefully handled by three steps:
1: Wrapped with packing paper or plastic bag;
2: HKT / FUP box or neutral box;
3: Put in an appropriate carton box or wooden boxes and be fixed firmly.

Q: How can I know the status of my order?
We will keep you udpate the process of the preparation, to ensure all issues are resolved prior to the delivery.products pictures can be provided if required. We shall send out the goods immediately after confirmation and you will get the tracking information right away

Q: How to guarantee your service?

A. Strict inspection during production

B. Strictly check the products before shipment to ensure our packaging in good condition

C. Track and receive feedback from customer regularly

Q: What will you do for quality complaint ?

A. We will respond to customer within 24 hours.

B. Our QC will retest the same stock item, if confirmed it is quality problem, we will make corresponding compensation