Control Center Rack Mountable Cabinet Server Racks And Cabinets Beautiful Shape

Product Specification

Isolation Electromagnetic Good quality cold rolled steel plate Sever Rack Cabinet YH2012

How to choose the right server cabinet
Choosing the right server cabinet depends not only on the brand of the product, but also on the quality and function of the product. If the server used for website construction, virtual hosting, etc., is affected by too many problems, it will involve the survival of a website.
This is an excellent manifestation of the cabinet. The cabinet has a very distinct hierarchy. The level of the cabinet is not to look at the brand, but to look at his type, function, performance, and so on. That is, it is necessary to satisfy the needs of the users to the greatest extent possible, and to reduce the problems as much as possible. Although the cabinets look almost the same, there are still several types of subdivisions depending on their usage. The common ones are the cabinets used for wiring and the cabinets used to place servers. Cabinets used for cabling are usually used to place multiple terminal switches. In addition, the cabinet used to place the server must have a locked door. Because valuable equipment inside is to be protected, expensive routers and firewalls are usually placed inside the cabinet.
After understanding the hierarchy of server storage cabinets, it is necessary to select what kind of cabinet services are based on their own needs and the acceptance of quotes. From the above perspective, we know that the decision to determine the level of the cabinet is still the main function around the heat. This is important for the cabinet because it guarantees the normal operation of the server.
Does that mean that you must choose high-end server racks? This is not the case, it depends on your requirements for the use of the server, such as your application needs to generate heat, there is too much overhead and so on is still the best choice for high-end server cabinets. Of course, if you are satisfied with the economic strength, even if the general server cabinet can be satisfied with the needs, but in order to reduce the worries of the selection of high-end server racks can also be. Therefore, the most critical thing is still to contact their own conditions and needs.

(I) Rack frame requirements: (1) Material and load-bearing requirements:
The cabinet body adopts a 12-fold profile (or 18-fold profile, Xin Bo has 12-fold and 18-fold two profiles) frame structure, and the frame is made of high-quality cold-rolled steel plate at one time. The load-bearing capacity of the cabinet shall not be less than 1500KG (or 1800KG, XinBo 120% of the load of the profile shall be 1500KG, and the load of the 18% of the profile shall be 1800KG). A third party inspection report shall be provided. Welding robot arm welding to ensure that no bad welding, leakage welding, in the normal use of the same type. The top and bottom frames and vertical profiles are removable for easy transport and field installation. The
(2) Cabinet front door, rear door, side board requirements
The ventilating rate of the front and rear doors of the cabinet is not less than 78% (or 85%, Sinbo has two types of mesh doors). The cabinet doors and side panels are detachable. The front and rear doors are exposed, and the doors are opened and closed. Flexible rotation, reliable locking, easy construction, installation and maintenance; no less than 3 front door hinges, no less than 6 rear double door hinges, and door opening angle not less than 110°. The
The front door is opened outwards and the door opening direction can be switched left and right, and the back door is opened outwards. Before and after the door lock, no less than three points. The door lock is required to be stable, the switch is smooth, and the key is universal. The side panel thickness of the cabinet is 1.5mm, and it can be quickly installed.