Shenzhen Go-Gold Motor Co., Ltd.
| Payment Terms | L/C, T/T,paypal |
| Supply Ability | 10000 pcs-30 days |
| Delivery Time | 7days for samples |
| Packaging Details | packing in boxes |
| Type | Brushless Electric Motor |
| Voltage | 18-30V |
| Application | vacuum cleaner |
| Material | Copper, Iron, Plastic, Aluminum |
| Warranty | 3years |
| Brand | GO-GOLD |
| Brand Name | Go-Gold |
| Model Number | KG-4560 |
| Certification | ISO |
| Place of Origin | China |
View Detail Information
Explore similar products
24V Brushless Electric Motor 0.75A Mini Wet Dry Vacuum Cleaner Motor
400W Dc Vacuum Cleaner Motor 18-30V Brushless Dc Vacuum Motor
220V 0.75A Vacuum Cleaner Motor 1600W AC Induction Motor KG-PH25-1600
Vacuum Cleaner Motor 25V DC 80,000RPM 300W 0.165mNm KG-6534DC25
Product Specification
| Payment Terms | L/C, T/T,paypal | Supply Ability | 10000 pcs-30 days |
| Delivery Time | 7days for samples | Packaging Details | packing in boxes |
| Type | Brushless Electric Motor | Voltage | 18-30V |
| Application | vacuum cleaner | Material | Copper, Iron, Plastic, Aluminum |
| Warranty | 3years | Brand | GO-GOLD |
| Brand Name | Go-Gold | Model Number | KG-4560 |
| Certification | ISO | Place of Origin | China |
| High Light | 110000RPM Brushless Vacuum Cleaner Motor ，Vacuum Cleaner Dc Motor 110000RPM ，Vacuum Cleaner Dc Motor | ||
Description:
Hall sensors are embedded into the stationary part of the motor. Embedding the Hall sensors into the stator is a complex process because any misalignment in these Hall sensors, with respect to the rotor magnets, will generate an error in determination of the rotor position. To simplify the process of mounting the Hall sensors onto the stator, some motors may have the Hall sensor magnets on the rotor, in addition to the main rotor magnets. These are a scaled down replica version of the rotor. Therefore, whenever the rotor rotates, the Hall sensor magnets give the same effect as the main magnets. The Hall sensors are normally mounted on a PC board and fixed to the enclosure cap on the non-driving end. This enables users to adjust the complete assembly of Hall sensors, to align with the rotor magnets, in order to achieve the best performance.
Based on the physical position of the Hall sensors, there are two versions of output. The Hall sensors may be at 60° or 120° phase shift to each other.
Based on this, the motor manufacturer defines the commutation sequence, which should be followed when controlling the motor.
---The Hall sensors require a power supply. The voltage may range from 4 volts to 24 volts. Required current can range from 5 to 15 mAmps. While designing the controller, please refer to the respective motor technical specification for exact voltage and current ratings of the Hall sensors used. The Hall sensor output is normally an open-collector type. A pull-up resistor may be required on the controller side.
Basic Parameters:
| Voltage | 18-30 V | Torque | 7-30 Nm |
| Input power | 60-400 W | Rated speed | 75000-115000 RPM |
Motor Outline Drawing:
Theory of Operation Each commutation sequence has one of the windings energized to positive power (current enters into the winding), the second winding is negative (current exits the winding) and the third is in a non-energized condition. Torque is produced because of the interaction between the magnetic field generated by the stator coils and the permanent magnets. Ideally, the peak torque occurs when these two fields are at 90° to each other and falls off as the fields move together. In order to keep the motor running, the magnetic field produced by the windings should shift position, as the rotor moves to catch up with the stator field.
Applications that have frequent starts and stops and frequent reversals of rotation with load on the motor, demand more torque than the rated torque. This requirement comes for a brief period, especially when the motor starts from a standstill and during acceleration.
During this period, extra torque is required to overcome the inertia of the load and the rotor itself. The motor can deliver a higher torque, maximum up to peak torque, as long as it follows the speed torque curve.
Company Details
Business Type:
Manufacturer
Year Established:
2015
Total Annual:
1-60，000，000
Employee Number:
1~500
Ecer Certification：
Verified Supplier
Shenzhen Go-Gold Motor Co., Ltd Shenzhen Go-Gold Motor Co., Ltd established in 2015, which is specialized in manufacturing various Universal motors, DC motors, Induction motors and Brushless motors that are widely applied to household appliances, intelligent home, electri... Shenzhen Go-Gold Motor Co., Ltd Shenzhen Go-Gold Motor Co., Ltd established in 2015, which is specialized in manufacturing various Universal motors, DC motors, Induction motors and Brushless motors that are widely applied to household appliances, intelligent home, electri...
Get in touch with us
Leave a Message, we will call you back quickly!