Ecer asks for your consent to use your personal data to:
Personalised advertising and content, advertising and content measurement, audience research and services development
Store and/or access information on a device
Your personal data will be processed and information from your device (cookies, unique identifiers, and other device data) may be stored by, accessed by and shared with 135 TCF vendor(s) and 65 ad partner(s), or used specifically by this site or app.
Some vendors may process your personal data on the basis of legitimate interest, which you can object to by do not consent. Contact our platform customer service, you can also withdraw your consent.
Your message must
be between 20-3,000 characters!
Submit Requirement
Thank You！
Your requirement has been sent. we will contact you quickly!
{"title":"Bently Nevada 330102-04-25-10-02-00 3300 XL 8 mm Armored Proximity Probe \u00b7 1.0 m","imgUrl":"https:\/\/img.chinax.com\/nimg\/8a\/06\/3737162a9f33e8ca8fa97168388a-200x200-1\/bently_nevada_330102_04_25_10_02_00_3300_xl_8_mm_armored_proximity_probe_c2_b7_1_0_m.jpg","attrs":{"Minimum Order Quantity":"1","Brand Name":"Bently Nevada","Payment Terms":"T\/T","Delivery Time":"2-3 work days"}}
{"title":"Bently Nevada 3500\/93 135799-01 Display Interface Module for Standard 3500","imgUrl":"https:\/\/img.chinax.com\/nimg\/66\/aa\/36cf410bb8fe07313d29f27aa2df-200x200-1\/bently_nevada_3500_2f93_135799_01_display_interface_module_for_standard_3500_series_rack_slot.jpg","attrs":{"Brand Name":"Bently Nevada","Model Number":"3500\/93 135799-01","Place of Origin":"USA","Minimum Order Quantity":"1"}}
{"title":"330103-10-20-05-02-CN Bently Nevada 3300 XL 8 mm Proximity Probe","imgUrl":"https:\/\/img.chinax.com\/nimg\/6e\/e7\/139ae7f0e0f8072dec11572c66e1-200x200-1\/330103_10_20_05_02_cn_bently_nevada_3300_xl_8_mm_proximity_probe.jpg","attrs":{"Delivery Time":"2-3 work days","Brand Name":"Bently Nevada","Weight":"0.1kg","Model Number":"330103-10-20-05-02-CN"}}
{"title":"Bently Nevada 330130-035-01-CN 3300 XL 3.5m Extension Cable with FluidLoc Armor","imgUrl":"https:\/\/img.chinax.com\/nimg\/a7\/d4\/efa9748ec5fc7f64d41b01b94480-200x200-1\/bently_nevada_330130_035_01_cn_3300_xl_3_5m_extension_cable_with_fluidloc_armor_and_ccc_ex_certification.jpg","attrs":{"Brand Name":"Bently Nevada","Model Number":"330130-035-01-CN","Place of Origin":"USA","Minimum Order Quantity":"1"}}
{"title":"Bently Nevada 330103-00-05-50-12-00 3300 XL 8mm Tip Diameter Proximity Probe","imgUrl":"https:\/\/img.chinax.com\/nimg\/ca\/3a\/571f687b6fe3345e1b5828243c98-200x200-1\/bently_nevada_330103_00_05_50_12_00_3300_xl_8mm_tip_diameter_proximity_probe_with_5_0_meter_system_length_and_api_670_compliance.jpg","attrs":{"Brand Name":"Bently Nevada","Model Number":"330103-00-05-50-12-00","Place of Origin":"USA","Minimum Order Quantity":"1"}}
{"title":"330104-03-06-10-02-00 Bently Nevada 3300 XL 8 mm Probe","imgUrl":"https:\/\/img.chinax.com\/nimg\/c9\/09\/e863d63ea18fac500821bb6eabf3-200x200-1\/330104_03_06_10_02_00_bently_nevada_3300_xl_8_mm_probe.jpg","attrs":{"Delivery Time":"2-3 work days","Place of shipment":"Xiamen,China","Model Number":"330104-03-06-10-02-00","Weight":"0.12kg"}}
{"title":"35Vdc 990-08-XX-01-00 MOD:165353-01 Bently Nevada 990 Vibration Transmitter 9","imgUrl":"https:\/\/img.chinax.com\/nimg\/ca\/5e\/16e91aee8ca7d68c40565add4f70-200x200-1\/35vdc_990_08_xx_01_00_mod_3a165353_01_bently_nevada_990_vibration_transmitter_9_5mm.jpg","attrs":{"Brand Name":"Bently Nevada","Model Number":"990-08-XX-01-00 MOD:165353-01","Place of Origin":"USA","Minimum Order Quantity":"1"}}
Bently Nevada 330102-04-25-10-02-00 3300 XL 8 mm Armored Proximity Probe
A standard-mount proximity probe for non-contact machinery monitoring within the 3300 XL 8 mm Proximity Transducer System.
Measurement Non-contact shaft measurement Probe Format Standard-mount proximity probe Monitoring Vibration and position measurement
Configuration
Ordering Code
330102 3300 XL 8 mm probe with 3/8-24 UNF thread and armor
04 0.4 in unthreaded length
25 2.5 in overall case length
10 1.0 m total probe length
02 Miniature coaxial ClickLoc connector, standard cable
00 No agency-approval option
Technical Data
Technical Specifications
Bently Nevada Datasheet 141194 Rev. AM
Cable
75 Ω triaxial, FEP-insulated standard cable
Probe Tip Diameter
8.0 mm (0.31 in)
Probe Tip Material
Polyphenylene sulfide (PPS)
Probe Case Material
AISI 303 or 304 stainless steel
Expand full electrical, mechanical & environmental specifications
Probe DC Resistance
7.59 ± 0.50 Ω for 1.0 m probe
Linear Range
2 mm (80 mils); approximately 0.25–2.3 mm
Recommended Radial-Vibration Gap
−9 Vdc; approximately 1.27 mm (50 mils)
Incremental Scale Factor
7.87 V/mm (200 mV/mil) ±5% for standard 1 m or 5 m systems
Frequency Response
0 to 10 kHz, +0 / −3 dB
Minimum Flat Target Size
15.2 mm (0.6 in) diameter
Minimum Shaft Diameter
50.8 mm (2 in)
Recommended Minimum Shaft Diameter
76.2 mm (3 in)
Field Wiring
0.2–1.5 mm² (16–24 AWG)
Maximum Field-Wiring Length
305 m (1,000 ft)
Power Supply
−17.5 to −26 Vdc, 12 mA maximum
Output Resistance
50 Ω
Supply Sensitivity
<2 mV output change per volt input change
Extension Cable Capacitance
69.9 pF/m (21.3 pF/ft), typical
Probe Temperature
−52°C to +177°C (−62°F to +350°F)
Probe Case Torque
11.2 N·m recommended; 33.9 N·m maximum
Maximum Thread Engagement
0.563 in
Minimum Cable Bend Radius
25.4 mm (1.0 in)
Maximum Connector Torque
0.565 N·m (5 in·lbf)
Connector Tightening
Finger tight for two 3300 XL gold ClickLoc connectors
Calibration Target
AISI 4140 steel
Probe Cable Tensile Strength
330 N (75 lbf)
Probe-to-Extension Connector Strength
270 N (60 lbf)
Source: Bently Nevada, 3300 XL 8 mm Proximity Transducer System Datasheet 141194 Rev. AM.
System Fit
Compatibility & Replacement
Original Compatibility
Designed for the 3300 XL 8 mm Proximity Transducer System and its matched Proximitor Sensor chain.
Historical Compatibility
Bently Nevada states that 3300 XL 8 mm components are electrically and physically interchangeable with non-XL 3300 5 mm and 8 mm components, with system performance then limited to the non-XL specification.
Machine Monitoring
Applications & Fault Scenarios
Non-contact shaft measurement
Used in machinery monitoring where shaft position and dynamic vibration are measured without physical contact with the target surface.
01 · SIGNAL
Missing or unstable signal
Probe, connector, cable or gap conditions may need inspection when a monitoring channel becomes unstable.
02 · POSITION
Abnormal shaft-position reading
Incorrect gap or a disturbed transducer chain can affect the measured position signal.
03 · CONNECTION
Intermittent connection
Connector condition, cable routing and bend radius should be checked during troubleshooting.
04 · DOWNTIME
Monitoring channel unavailable
Loss of a critical measurement channel can delay maintenance completion and machine return to service.
Installation
Installation & Commissioning
01 · MOUNT
Secure the probe
Install the probe within the specified mechanical limits and apply the required installation torque.
02 · GAP
Set the measurement gap
Set the probe gap according to the required measurement condition before commissioning the channel.
03 · CABLE
Protect the cable
Maintain the specified bend radius and avoid excessive tensile or mechanical loading.
04 · CONNECT
Complete the connection
Connect the probe to the associated transducer chain and secure the connector correctly.
05 · SYSTEM
Check the transducer chain
Confirm the appropriate Proximitor Sensor and monitoring arrangement before operation.
06 · TEST
Verify the channel
Check supply, continuity, gap voltage and monitor response before returning the channel to service.
Reference
Documentation
330102-04-25-10-02-00 datasheet
Bently Nevada Datasheet 141194 covers the 3300 XL 8 mm probe ordering options, mechanical limits, system performance and installation-related requirements.
Talk to AMIKON
Talk to AMIKON
AMIKON Industrial Automation
Contact: Miya Zheng · Send us the exact part number and your requirements.
RFQ: Part Number · Quantity · Destination · Required Date · Machine/System Model
INSPECTION Identity and condition checked before dispatch; testing where applicable.
PACKAGING Protective export packaging for shipment.
WARRANTY One-year warranty under quotation terms.
DOA / RETURN Report promptly with photos and available test details.
Buyer Questions
FAQ
What do the 04-25-10-02-00 options specify?
04 specifies 0.4 in unthreaded length, 25 specifies 2.5 in overall case length, 10 specifies 1.0 m total probe length, 02 specifies the miniature coaxial ClickLoc connector with standard cable, and 00 specifies no agency approval option.
Does 330102-04-25-10-02-00 require an extension cable?
No. The 1.0 m configuration is used without an extension cable.
What is the recommended gap for radial-vibration measurement?
The recommended setting is −9 Vdc, approximately 1.27 mm (50 mils).
Can this 3300 XL probe be used with a non-XL 3300 system?
Bently Nevada states that 3300 XL 8 mm components are electrically and physically interchangeable with non-XL 3300 5 mm and 8 mm components. Mixed systems are limited to the performance specifications of the non-XL components.
What should be checked before ordering a replacement?
Check the complete part number, thread, armor, probe dimensions, 1.0 m length, ClickLoc connector and the installed Proximitor Sensor arrangement.
Company Profile
Amikon Limited specializes in the global supply of industrial automation module spare parts.The company focuses on well-known international brands covering DCS systems, robot control systems, and large-scale servo control systems.
Product scope includes:
➢Distributed Control Syste... Company Profile
Amikon Limited specializes in the global supply of industrial automation module spare parts.The company focuses on well-known international brands covering DCS systems, robot control systems, and large-scale servo control systems.
Product scope includes:
➢Distributed Control Syste...
