AMIKON LIMITED
| Payment Terms | T/T |
| Delivery Time | 2-3 work days |
| Brand Name | Bently Nevada |
View Detail Information
Explore similar products
Bently Nevada 3500/93 135799-01 Display Interface Module for Standard 3500
330103-10-20-05-02-CN Bently Nevada 3300 XL 8 mm Proximity Probe
Bently Nevada 330130-035-01-CN 3300 XL 3.5m Extension Cable with FluidLoc Armor
Bently Nevada 330103-00-05-50-12-00 3300 XL 8mm Tip Diameter Proximity Probe
Product Specification
| Payment Terms | T/T | Delivery Time | 2-3 work days |
| Brand Name | Bently Nevada | ||
| High Light | Bently Nevada 3500/65 temperature monitor ，145988-02 temperature monitor module ，Bently Nevada temperature monitor module | ||
16-Channel Temperature Monitor
A temperature-monitoring module for the 3500 Machinery Protection System. It accepts RTD and isolated-tip thermocouple signals, processes temperature measurements, and supports configurable alarm setpoints for machinery condition monitoring.
The monitor evaluates measured temperatures against user-configured alert and danger limits. Configuration is performed through 3500 Rack Configuration Software. Before ordering a replacement, confirm the installed I/O termination arrangement, rack configuration, and applicable system software and firmware requirements.
| Input Signals | 1 to 16 RTD or isolated-tip thermocouple (TC) transducer signals |
|---|---|
| Input Configuration | Isolated-tip TC, 3-wire RTD, 4-wire RTD, or a combination of TC and RTD inputs |
| Nominal Power Consumption | 3 W |
| Input Impedance | Greater than 1 MΩ for each lead input |
| Temperature Resolution | 1°C or 1°F |
| Temperature Accuracy | ±3°C at +25°C (±5.4°F at +77°F) for internal and external termination arrangements in bulkhead and standard racks |
| RTD Current Source | 913 ± 7 µA at 25°C per transducer; one supply for 4-wire RTDs and two supplies for 3-wire RTDs |
| Front-Panel Indicators | OK, TX/RX and Bypass LEDs |
| Type E Thermocouple | -100°C to +1000°C (-148°F to +1832°F) |
|---|---|
| Type J Thermocouple | 0°C to +760°C (32°F to +1400°F) |
| Type K Thermocouple | 0°C to +1370°C (32°F to +2498°F) |
| Type T Thermocouple | -160°C to +400°C (-256°F to +752°F) |
| 100 Ω Platinum RTD, α = 0.00385 | 3-wire and 4-wire; -200°C to +850°C (-328°F to +1562°F) |
| 100 Ω Platinum RTD, α = 0.00392 | 3-wire and 4-wire; -200°C to +700°C (-328°F to +1292°F) |
| 120 Ω Nickel RTD | 3-wire and 4-wire; -80°C to +260°C (-112°F to +500°F) |
| 10 Ω Copper RTD | 3-wire and 4-wire; -100°C to +260°C (-148°F to +500°F) |
| Alarm Setpoints | User-configurable Alert and Danger setpoints; under-alarm and over-alarm setpoints are supported. |
|---|---|
| Alarm Setpoint Range | 0–100% of full scale, subject to the sensor measurement range. |
| Alarm Setpoint Accuracy | Within 0.13% of the desired value. |
| Alert Delay | 1–60 seconds, in 1-second increments. |
| Danger Delay | 1–60 seconds, in 0.5-second increments. |
| Signal Conditioning | Full-scale range for each channel is set through 3500 Configuration Software. No calibration is required as specified in the datasheet. |
| Cold-Junction Compensation | For TC measurements: ±2°C at +25°C (±3.6°F at +77°F). |
| OK LED | Indicates whether the monitor is operating properly. |
| TX/RX LED | Indicates communication with other modules in the rack. |
| Bypass LED | Indicates when the monitor is in Bypass Mode. |
| Operating Temperature | -30°C to +65°C (-22°F to +150°F) |
|---|---|
| Storage Temperature | -40°C to +85°C (-40°F to +185°F) |
| Main Module Dimensions (H × W × D) | 241.3 × 24.4 × 241.8 mm (9.50 × 0.96 × 9.52 in) |
| Main Module Weight | 0.91 kg (2.0 lb) |
| I/O Module Dimensions (H × W × D) | 241.3 × 24.4 × 99.1 mm (9.50 × 0.96 × 3.90 in) |
| I/O Module Weight | 0.45 kg (1.0 lb) |
| Rack Space | Main module: one full-height front slot; I/O module: one full-height rear slot |
Confirm the installed rack, I/O module part number and revision, termination method, firmware, software, and sensor wiring before replacing or commissioning equipment.
Technical reference: Bently Nevada 3500/65 16-Channel Temperature Monitor Datasheet, document 172930, Rev. P.
This module is used in machinery monitoring installations where temperature signals are part of the equipment protection strategy. Depending on the installed sensors and system design, monitored points may include bearing metal, compressor process, steam, or motor stator temperatures.
AMIKON supports industrial automation spare-part sourcing for maintenance teams and system integrators. Before ordering, confirm the supplied item's condition, inspection or test scope, packaging, dispatch arrangements, warranty coverage, and return terms in the written quotation.
Select either image directly in the Visual Editor to replace it, or update the image path in HTML mode. Recommended upload size: at least 600 × 450 px per image.
Please provide the following details when requesting a quotation:
| Part Number 145988-02 | Quantity Required quantity |
| Destination Delivery city and country | Required Date Expected delivery date |
| Machine/System Model Installed 3500 rack and relevant system or machine model | |
Email your requirements to sales@amikon.cn for quotation and confirmation of the offered item's condition and commercial terms.
Company Details
Business Type:
Trading Company
Year Established:
2004
Total Annual:
85682000-125000000
Employee Number:
70~80
Ecer Certification：
Verified Supplier
Company Profile Amikon Limited specializes in the global supply of industrial automation module spare parts.The company focuses on well-known international brands covering DCS systems, robot control systems, and large-scale servo control systems. Product scope includes: ➢Distributed Control Syste... Company Profile Amikon Limited specializes in the global supply of industrial automation module spare parts.The company focuses on well-known international brands covering DCS systems, robot control systems, and large-scale servo control systems. Product scope includes: ➢Distributed Control Syste...
Get in touch with us
Leave a Message, we will call you back quickly!