AMIKON LIMITED
| Payment Terms | T/T |
| Delivery Time | 2-3 work days |
| Brand Name | Bently Nevada |
View Detail Information
Explore similar products
Bently Nevada 3500/93 135799-01 Display Interface Module for Standard 3500
330103-10-20-05-02-CN Bently Nevada 3300 XL 8 mm Proximity Probe
Bently Nevada 330130-035-01-CN 3300 XL 3.5m Extension Cable with FluidLoc Armor
Bently Nevada 330103-00-05-50-12-00 3300 XL 8mm Tip Diameter Proximity Probe
Product Specification
| Payment Terms | T/T | Delivery Time | 2-3 work days |
| Brand Name | Bently Nevada | ||
| High Light | Velomitor CT velocity transducer ，Bently Nevada 190501-12-00-04 transducer ，Bently Nevada velocity transducer | ||
| AMIKON / INDUSTRIAL PARTS SOURCING 190501-12-00-04Bently Nevada Velomitor CT Velocity Transducer | SERIES 190501 |
| SENSITIVITY 3.94 mV/mm/s ±5% | FREQUENCY RESPONSE 3–900 Hz ±1.0 dB | OPERATING TEMPERATURE −40 to +85°C |
| APPLICATION PROFILE The 190501 Velomitor CT is designed to measure casing vibration on cooling tower and air-cooled heat-exchanger fan assemblies operating at or above 90 rpm, typically 100–300 rpm. It can also capture vibration associated with the fan motor and speed reducer. | • WHEN CUSTOMERS SEARCH Unexpected vibration changes, suspected rotor imbalance or misalignment, or a need to replace an existing sensor. • OPERATIONAL CONCERN Unreliable vibration measurements can weaken machinery condition assessment and delay fault detection, potentially contributing to unplanned fan or heat-exchanger downtime. |
| SENSITIVITY 3.94 mV/mm/s 100 mV/in/s · ±5% | FREQUENCY RESPONSE 1.5 Hz–1 kHz ±3.0 dB; 3–900 Hz at ±1.0 dB |
| Sensitivity | 3.94 mV/mm/s (100 mV/in/s), ±5% |
| Frequency response | 3.0–900 Hz, ±1.0 dB; 1.5 Hz–1.0 kHz, ±3.0 dB |
| Velocity range | 63.5 mm/s peak (2.5 in/s peak); high-frequency vibration above 10 g peak over 1 kHz can reduce this range |
| Amplitude linearity | ±2% up to 63.5 mm/s peak |
| Transverse response | Less than 5% of axial sensitivity |
| Output bias voltage | 10.1 VDC ±1.0 VDC, Pin A referenced to Pin B |
| Dynamic output impedance | Less than 400 Ω typical |
| Mounted resonant frequency | Minimum 9 kHz for stud mounting, except quick-disconnect mounting |
| Grounding | Internal electronics isolated from the case |
| Operating temperature | −40°C to +85°C |
| Storage temperature | −40°C to +100°C |
| Case material | 316L stainless steel |
| Connector | 2-pin, top-mounted 316L stainless steel MIL-C-5015 |
| Height | 82 mm (3.2 in) |
| Typical weight | Less than 297 g (10.5 oz) |
| Mounting surface | 33 mm diameter (1.3 in) |
| Mounting torque | 4.5 N·m ±0.6 N·m |
| Mounting orientation | Any orientation |
| Shock limit | 5,000 g peak maximum |
| Maximum cable length | Up to 305 m (1,000 ft) using cable part number 02173006 without signal degradation |
| Humidity limit | 100% condensing, non-submerged |
| Installation guidance | Install on an appropriate bearing housing or machine casing. Incorrect mounting can reduce response or generate invalid vibration signals. |
Technical values refer to the 190501 Velomitor CT product family. Confirm the exact ordered configuration before replacement.
| Abnormal readings | Inspect the sensor mounting surface and installation condition. |
| Missing signal | Check connector engagement, cable continuity and monitoring-channel condition. |
| Replacement check | Confirm the full part number, interface, mounting and required hazardous-area approvals. |
| 01 ✓ Confirm Model and order details | 02 ◉ Inspect Agreed checks before dispatch | 03 ▣ Package Protective packaging | 04 ↺ After-sales DOA and warranty terms |
| F | Q / QUESTION What is the 190501-12-00-04 used for? A / ANSWER It belongs to the Velomitor CT family, designed for low-frequency casing vibration measurements on cooling tower and air-cooled heat-exchanger fan assemblies. |
| F | Q / QUESTION What is the operating speed range? A / ANSWER The product family is designed for applicable fan assemblies operating at or above 90 rpm, typically 100–300 rpm. |
| F | Q / QUESTION What is its nominal sensitivity? A / ANSWER The specified sensitivity is 3.94 mV/mm/s (100 mV/in/s), ±5%. |
| F | Q / QUESTION What should be checked before ordering a replacement? A / ANSWER Confirm the complete part number, mounting arrangement, connector and approval requirements, then verify compatibility with the installed monitoring system. |
| F | Q / QUESTION Where can I find the 190501-12-00-04 pdf/manual/datasheet? A / ANSWER Ask AMIKON for the available product documentation and confirm that it matches the complete 190501-12-00-04 configuration. |
Additional models available for sourcing. Listing here does not imply technical compatibility or interchangeability.
| Model | Model | Model | Model | Model |
|---|---|---|---|---|
| X20CP1585 | 6SL3352-1AE33-1AA1 | IC694MDL742B | M12-5 | 6GT2102-0AB00 |
| 3RA1120-4DD26-0BB4 | IC200ALG260 | V600-D8KR04 | AF104 | 6SL3131-7TE21-6AA3 |
| IC698CPE020 | MHZL2-16C | 6SE6440-2UD22-2BA1 | X20AT4222 | IC200PBI001-MH |
| 8AC122.6 | FX3-MOC100000 | 3DO479.6 | IC695ETM001-LAAA | QJ71C24 RS-232/RS-422/485UNIT |
| 6SN1145-1BB00-0DA1 | OADM 20I44/403836 | IC200CHS002L | 3RG7175-3BE00 | AM607/100PETH |
| IC695CMM002-FK | 6SL3353-6TE41-7CA3 | HF16HA-1B | PLE080-020-SSSA3AE-E14 | 3AM055.6 |
| IC694ALG221 | DBC6HC470001100 | 6GT2801-1AA10 | 6SL3352-6TE32-1AA3 | X20AI1744 |
| E-41 LS 45 1157/A | AM055 | TS102 | 6SL3353-6TE33-8AA3 | 8AC110.60-2 |
| IC200ALG230J | X20CM2821 | 6SL3210-1KE22-6AF1 | KCD2-SOT-EX1.LB | 6FQ1147-0B |
| IC200MDL650 | 6SL3224-0BE25-5UA0 | 6SL3362-0AG00-0AA1 | SMPI 20 IMP RD M12-5 10/02/02/03353/3 | A20B-2900-0700/02A |
| IC695PNS001-BBBB | 6RA7031-6DV62-0 | 7AF104.7 | MPG32 340011 | 6EC1660-3A |
| 6SL3111-4VE21-6EC1 | IC695HSC304-FA | 7AF101.7 | AM351 | IC200ALG260 |
| 6SL3111-3VE21-6EA0 | 6SL3353-6TE41-7CA3 | 6SN1112-1AC01-0AA1 | X20CM2821 | V500-R521 |
| 3DO479.6 | IC200CHS002L | 6SL3352-1AE33-1AA1 | 6SE7022-7EP50-Z | CFL01.1-P1 R911170005 |
| 6AM4940-2AA00-1AA0 | ADVUL-80-40-P-A | ZX2-LDA41 | V500-R521C2 | 05701-A-0325 |
| 3RG7175-3BE00 | E-42 LS 45 1157/A | IC200PBI001-MH | 6SL3131-7TE21-6AA3 | BIS M-404-045-401-07-S4 BIS015R |
| 8BVI0055HWD0.000-1 | 6SL3111-3VE21-6EA0 | IC695CMM002-FK | 00310418-10 KJ-V3-00846 | 3AM055.6 |
| IC200MDL650 | 6SL3352-6TE32-1AA3 | 6GT2801-1AA10 | IC694ALG221 | X20AT4222 |
| 6SL3224-0BE25-5UA0 | 6SN1145-1BB00-0DA1 | IC698CPE020 | 6FQ1147-0B | AM607/100PETH |
Company Details
Business Type:
Trading Company
Year Established:
2004
Total Annual:
85682000-125000000
Employee Number:
70~80
Ecer Certification：
Verified Supplier
Company Profile Amikon Limited specializes in the global supply of industrial automation module spare parts.The company focuses on well-known international brands covering DCS systems, robot control systems, and large-scale servo control systems. Product scope includes: ➢Distributed Control Syste... Company Profile Amikon Limited specializes in the global supply of industrial automation module spare parts.The company focuses on well-known international brands covering DCS systems, robot control systems, and large-scale servo control systems. Product scope includes: ➢Distributed Control Syste...
Get in touch with us
Leave a Message, we will call you back quickly!