AMIKON LIMITED
| Payment Terms | T/T |
| Delivery Time | 2-3 work days |
| Brand Name | Bently Nevada |
View Detail Information
Explore similar products
Bently Nevada 3500/93 135799-01 Display Interface Module for Standard 3500
330103-10-20-05-02-CN Bently Nevada 3300 XL 8 mm Proximity Probe
Bently Nevada 330130-035-01-CN 3300 XL 3.5m Extension Cable with FluidLoc Armor
Bently Nevada 330103-00-05-50-12-00 3300 XL 8mm Tip Diameter Proximity Probe
Product Specification
| Payment Terms | T/T | Delivery Time | 2-3 work days |
| Brand Name | Bently Nevada | ||
| High Light | Bently Nevada 330104-00-07-10-02-00 ，3300 XL 8 mm Proximity Probe ，8 mm Eddy Current Proximity Probe | ||
3300 XL 8 mm series probe for non-contact rotating-machinery measurement. Confirm the complete ordering code and installed transducer configuration when sourcing a replacement.
This ordering code belongs to the Bently Nevada 3300 XL 8 mm proximity probe series. The coded dimensions and connection options should be checked against the installed probe before ordering.
| Manufacturer | Bently Nevada |
|---|---|
| Product Family | 3300 XL 8 mm proximity probe |
| Probe Type | Metric-threaded probe with armor |
| Probe Tip Diameter | 8.0 mm (0.31 in) |
| Thread | M10 × 1 |
| Unthreaded Length Code | 00 — 0 mm unthreaded length |
| Case Length Code | 07 — 70 mm case length |
| Total Probe Length Code | 10 — 1.0 m (3.3 ft) |
| Connector / Cable Code | 02 — miniature coaxial ClickLoc connector, standard cable |
| Approval Code | 00 — no agency-approval option specified by this ordering code |
| Measurement Principle | Eddy-current, non-contact proximity measurement |
|---|---|
| Measurement Applications | Shaft vibration and static shaft position when used with the appropriate transducer system |
| Nominal Linear Range | 2.0 mm (80 mils) for the specified 3300 XL 8 mm transducer system |
| Nominal Scale Factor | 7.87 V/mm (200 mV/mil), a system-level value under specified conditions |
| Frequency Response | 0 to 10 kHz, +0 / −3 dB, under specified system conditions |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel |
| Cable Construction | 75 Ω triaxial cable with FEP insulation for the specified family |
| Connector Type | Miniature coaxial ClickLoc connector |
| Minimum Cable Bend Radius | 25.4 mm (1.0 in), as specified for the family cable |
| System Configuration | Probe and compatible Proximitor Sensor, with extension cable where required by the selected system arrangement |
| System Length Matching | Where an extension cable is used, confirm the combined probe and extension-cable length against the Proximitor Sensor specification |
The 3300 XL 8 mm proximity transducer family is used for non-contact shaft vibration and position measurement in rotating machinery monitoring. Maintenance teams may search for this probe when a measurement channel becomes unstable, shows an abnormal reading, loses its signal, or requires replacement after physical damage.
An unreliable channel can reduce visibility into machine condition and delay fault assessment. Check the complete measurement chain before concluding that the probe itself is defective.
| Inspection Point | What to Confirm |
|---|---|
| Ordering code | Compare the full part number and coded dimensions with the installed probe. |
| Signal-chain configuration | Confirm the Proximitor Sensor and any extension cable match the intended system arrangement. |
| Mounting and routing | Check thread fit, mounting clearance, cable routing and bend radius. |
| Connector and cable | Inspect for visible damage, looseness or contamination before recommissioning. |
| Abnormal signal | Consider the probe, cable, sensor, target and monitor channel during fault isolation; symptoms alone do not identify the failed component. |
Include these details to help confirm the item and delivery terms.
Confirm the M10 × 1 thread, 70 mm case-length option, 1.0 m total probe-length option and connector/cable code against the installed part.
No. The probe is a component of the proximity transducer system. Confirm the compatible Proximitor Sensor and any required extension cable for the installation.
Not from the reading alone. Inspect the probe, cable, sensor, target and monitor channel as part of fault isolation.
Match the complete ordering code and verify mechanical fit, cable routing, connector condition and the installed transducer-system configuration.
Consult the Bently Nevada 3300 XL 8 mm Proximity Transducer System datasheet, document 141194, and compare its ordering-code table with the complete part number.
Catalog navigation only. These listed part numbers are not presented as compatible replacements for this probe.
Company Details
Business Type:
Trading Company
Year Established:
2004
Total Annual:
85682000-125000000
Employee Number:
70~80
Ecer Certification：
Verified Supplier
Company Profile Amikon Limited specializes in the global supply of industrial automation module spare parts.The company focuses on well-known international brands covering DCS systems, robot control systems, and large-scale servo control systems. Product scope includes: ➢Distributed Control Syste... Company Profile Amikon Limited specializes in the global supply of industrial automation module spare parts.The company focuses on well-known international brands covering DCS systems, robot control systems, and large-scale servo control systems. Product scope includes: ➢Distributed Control Syste...
Get in touch with us
Leave a Message, we will call you back quickly!