AMIKON LIMITED
| Payment Terms | T/T |
| Delivery Time | 2-3 work days |
| Brand Name | Bently Nevada |
View Detail Information
Explore similar products
Bently Nevada 3500/93 135799-01 Display Interface Module for Standard 3500
330103-10-20-05-02-CN Bently Nevada 3300 XL 8 mm Proximity Probe
Bently Nevada 330130-035-01-CN 3300 XL 3.5m Extension Cable with FluidLoc Armor
Bently Nevada 330103-00-05-50-12-00 3300 XL 8mm Tip Diameter Proximity Probe
Product Specification
| Payment Terms | T/T | Delivery Time | 2-3 work days |
| Brand Name | Bently Nevada | ||
| High Light | Bently Nevada 3300 XL 8mm Probe ，330101-00-20-10-02-00 Proximity Probe ，Bently Nevada 8mm Probe with Warranty | ||
A non-contacting eddy-current probe for machinery position and vibration measurement within a compatible Bently Nevada 3300 XL 8 mm proximity transducer system.
The 330101-00-20-10-02-00 is a 3300 XL 8 mm proximity probe. It senses the distance between the probe tip and a conductive target without physical contact. In a complete transducer system, the measured gap can be used to monitor shaft position and dynamic vibration.
In compatible machinery monitoring systems, proximity probes measure shaft position and vibration. The complete system may also support Keyphasor reference or speed measurements when configured for those functions.
| Manufacturer | Bently Nevada |
| Exact part number | 330101-00-20-10-02-00 |
| Product type | 3300 XL 8 mm Proximity Probe |
| Probe thread | 3/8-24 UNF |
| Unthreaded length option | 00 — 0.0 in |
| Overall case length option | 20 — 2.0 in |
| Total probe length option | 10 — 1.0 m (3.3 ft) |
| Connector and cable option | 02 — Miniature coaxial ClickLoc connector, standard cable |
| Armor | Without armor |
| Agency approval option | 00 — Not required |
| Sensing principle | Eddy-current proximity measurement |
| Measurement role | Non-contacting measurement of conductive-target position; dynamic measurements are supported by the complete transducer system |
These are system-level reference specifications, not standalone probe-only ratings. They depend on the matched components and published test conditions.
| Linear range | 2 mm (80 mils); approximately 0.25–2.3 mm (10–90 mils) from the target |
| Incremental scale factor | 7.87 V/mm (200 mV/mil) for standard 1 m or 5 m systems, subject to the documented system conditions |
| Frequency response | 0–10 kHz, +0/−3 dB, under the published system specification |
| Minimum flat target diameter | 15.2 mm (0.6 in) |
| Minimum shaft diameter | 50.8 mm (2 in) |
| Recommended minimum shaft diameter | 76.2 mm (3 in) |
| Recommended radial vibration gap | Approximately 1.27 mm (50 mils), corresponding to −9 Vdc in the documented system |
System performance depends on the Proximitor sensor, cable length, target material, gap setting, temperature and other published test conditions. Confirm the complete installed measurement loop before applying these values.
The 3300 XL 8 mm measurement system uses a probe, an extension cable where required, and a compatible Proximitor sensor.
Do not assume that mixing XL and non-XL 3300-series components preserves full 3300 XL performance. Consult the manufacturer's documentation for the specific combination.
AMIKON confirms availability, supplied condition, inspection arrangements, packaging and applicable warranty terms with the quotation. Report DOA or transit damage promptly with order details and supporting photos. Returns require prior approval; warranty coverage follows the terms confirmed for the supplied item.
Please provide Part Number, Quantity, Destination, Required Date, and Machine/System Model so the requested configuration and delivery requirements can be reviewed.
Industrial Supply Contact
Match the complete part number, thread, case length, cable length and connector. Confirm compatibility with the installed Proximitor sensor and total electrical length.
No. The specified configuration is without armor.
The probe is a sensing component. A compatible Proximitor sensor and any required extension cable are needed to complete the measurement chain.
Possible causes include probe or cable damage, a poor connection, incorrect gap, target conditions or another fault in the measurement chain. Check the complete channel before replacing components.
Provide the complete part number, quantity, destination, required date and machine/system model.
| Model | Model | Model | Model | Model |
|---|---|---|---|---|
| 6ES7307-1EA01-0AA1 | 6ES7134-4GB01-0AB0 | 6SL3300-1AH32-5AA0 | 6EP1437-2BA20 | 6SL3210-1PE33-7AL0 |
| ACS550-01-157A-4 | 6SE7090-0XX84-1CG1 | 7MH4601-1BA01 | 6SL3210-5DE12-4UA0 | 7MH4910-0AA01 |
| 6ES7288-1SR20-0AA1 | 6SL3121-1TE28-5AA3 | 6SE7041-3TL84-1JC0 | 6SN1115-0BA11-0AA1 | 6SE7028-0ES87-2DA1-Z |
| 6SE7031-7HG84-1JA1 | 6SL3220-1YD32-0UB0 | 6SL3220-1YD30-0UB0 | BL-E 50/150-7.5/2-R1 | 6SE7022-6TC61-Z |
| AMK AZ60 45899 | BL/60-90/6/01/50/XL | 1FW6130-8QB15-2JC2 | BL100/250-11/4 2121113 | 60-4-10/BM.PT82 |
| CI410 | 7CI410.70-1 | IF361 | AI351 | 7IF361.70-1 |
| 7AI351.70 | 41F370.7 | 7RM351.70 | IF321 | 7IF321.7 |
| AI774 | 7AI774.70 | AT664 | AI294 | 7AI294.7 |
| 3IF762.9 | IF762 | AT352 | 7AT352.70 | Keyence ML-G9311F |
| ML-G9300F | White A-0085-WHITE | White A-00085-WHITE | WRK40WH-MTH4-Prop.V | RM-320S-NA-22GT-D-1NAA2B2-CG3 |
| DO820 | HACH 2410212 | HACH G49 | HACH LICO620 | HACH 24347 |
| HACH HQ11D | HACH HQ14D | HACH LZV565 | IC695CPE302 | 8BVP0440HW00.000-1 |
| 8BVI0055HCS0.000-1 | PP15 | 4PP015.E420-36 | 80SD100XD.C0XX-01 | 0AK1999I-4 |
| 6PPT50.101E-10B | 8I64S200018.00X-1 | AB7000 | 8EI4X5HWS10.0500-1 | X20cSO4110 |
| X20BC8083 | X20IF1072 | X20BC00E3 | X20AI2622 | 7AO352.7 |
| AO352 | 6FC5812-2GY47-0YA0 | IC693CPU331-AA | IC755CSS12CDB-QB | IC694ALG233 |
| 140CPU67160 | 77158-008-51 | IC693ACC302 | IC693ACC320A | IC695PMM335 |
| IC200UDD104-CK | 3HAC025338-001 | SST-PB3-CLX | IC200ALG264F | IC694PWR331 |
| IC694PWR331F | IC695PSD040B | 3HAC025097-001/13 | SEW FF107/R DRN112M4/BE5/ASB8/TH/AK8W | Taktomat RT400 |
| White RL4-400 A-0806 | Cognex 3D-A5120 1000002984 | Siemens 1LA91892WA99-ZN60 | Epson C8-A901S RC700-A | Omron NX701-Z600 HMC-SD1A1 |
| Siemens 1AV3204A 1LE1003-2AA49-0AB4-Z | Siemens 6RA2491-4DV62-0 | Siemens 1PH8133-2DF12-1BC1 | Siemens 6SY7010-0AB07 | Siemens 1PH8165-1DF03-0CC1 |
| ECP34 2S4 | VACON0100-3L-0072-4-X | EDRN225M4/FF/3GD/TF/AL | Siemens 3RW4453-6BC46 | CD225M-4 |
For model-specific documentation, search for “330101-00-20-10-02-00 datasheet” and consult the Bently Nevada 3300 XL 8 mm Proximity Transducer System documentation. Confirm the exact configuration before ordering.
Company Details
Business Type:
Trading Company
Year Established:
2004
Total Annual:
85682000-125000000
Employee Number:
70~80
Ecer Certification：
Verified Supplier
Company Profile Amikon Limited specializes in the global supply of industrial automation module spare parts.The company focuses on well-known international brands covering DCS systems, robot control systems, and large-scale servo control systems. Product scope includes: ➢Distributed Control Syste... Company Profile Amikon Limited specializes in the global supply of industrial automation module spare parts.The company focuses on well-known international brands covering DCS systems, robot control systems, and large-scale servo control systems. Product scope includes: ➢Distributed Control Syste...
Get in touch with us
Leave a Message, we will call you back quickly!