GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, |
| Supply Ability | 30 Sets Per Month |
| Delivery Time | 30 work days |
| Packaging Details | Wooden Box or Vacuum Packing |
| Stock Width(mm) | 70-1000 |
| Stock Thickness(mm) | 0.6-6.0 |
| Line Speed(m/min) | 16~24 |
| Coil Weight(Kg) | 7000 |
| Work Roll Number(Pcs) | upper 6/lower 5 |
| Main Motor(Kw) | Coil Weight(Kg) |
| Warranty Period | 12 Months |
| Max.Coil O.D.(mm) | 1400 |
| Coil I.D.(mm) | 508 |
| Feed Length(mm) | ~500* |
| Mandrel Expansion | Hydrauilc |
| Reel Motor(kw) | 2.2 |
| Operating Air(Mpa) | 0.49 |
| Brand Name | RUIHUI |
| Certification | CE, ISO certification |
| Place of Origin | Guangdong, China (Mainland) |
View Detail Information
Explore similar products
2 Head 300mm Materials 1mm Thickness Steel Coil Uncoiler
Stamping And Unwinding Process Whole Plate Feeder , Feeding Sawing Machine
Large Auto Punching Machine / Steel Coil Uncoiler 45 Degree Split Type
Stamping Automation Three - In - One Vacuum Feeder Stock Thickness 0.6-6.0 mm
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, | Supply Ability | 30 Sets Per Month |
| Delivery Time | 30 work days | Packaging Details | Wooden Box or Vacuum Packing |
| Stock Width(mm) | 70-1000 | Stock Thickness(mm) | 0.6-6.0 |
| Line Speed(m/min) | 16~24 | Coil Weight(Kg) | 7000 |
| Work Roll Number(Pcs) | upper 6/lower 5 | Main Motor(Kw) | Coil Weight(Kg) |
| Warranty Period | 12 Months | Max.Coil O.D.(mm) | 1400 |
| Coil I.D.(mm) | 508 | Feed Length(mm) | ~500* |
| Mandrel Expansion | Hydrauilc | Reel Motor(kw) | 2.2 |
| Operating Air(Mpa) | 0.49 | Brand Name | RUIHUI |
| Certification | CE, ISO certification | Place of Origin | Guangdong, China (Mainland) |
| High Light | hydraulic uncoiler ，steel decoiling machine | ||
1. electrical aspects: servo motor or drive failure, the reasons are
(1) When the NC feeder is reinstalled, the drive or motor is subjected to illicit collision;
(2) The servo motor is loose inside due to vibration of the NC feeding electromechanical box. The detection method of the problem: after the servo failure, it is necessary to power off after a period of power-off, and then manually control the feeder to enter and retreat. If no alarm occurs, the possibility can be eliminated.
If such a situation occurs, the servo system must be replaced, and the process is troublesome. In addition, the probability of occurrence of this fault is small and rarely occurs, and may be ignored.
2. mechanical aspects:
(1) The NC feeder's rolling bearing is stuck and causes an alarm. The detection method is: servo off, and then manually rotate the feeding roller under no-load conditions, if there is obvious jam or unsmooth phenomenon.
That is to say, the bearing is faulty (in the detection, it must be ensured that there is no impurity between the two rollers and between the two gears). The failure rate is also relatively low, generally does not appear, if it occurs, the bearing must be replaced.
(2) After the customer replaces the mold, the height of the lower mold is inconsistent with the height of the last mold or the length of the positioning pin is inconsistent, which causes the relaxation time to be delayed, causing the positioning pin to stretch the material and alarming.
The detection method is: manual control of the slow decline of the punch, careful observation of the drum relaxation time, repeated detection, that is, the problem can be found. Solution: Adjust the relaxation time; reduce the NCF feeding height to be flush with the mold or about 3mm lower.
(3) If the material is replaced, the thicker material is used, and then the limit block is added in front, which may also cause an alarm phenomenon. The probability is small and it is not easy to appear, and the customer can find it by himself.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer,Exporter,Trading Company,Seller
Year Established:
2000
Total Annual:
30000000-50000000
Employee Number:
200~300
Ecer Certification：
Active Member
RUIHUI founded in 2000, the technology of automation periphery is from Japan. RUIHUI has been learning Japan and Germany technology, and using high standards of principle in the parts selection, for assembly process and spare parts, adhere to the requirements in accordance with the origina... RUIHUI founded in 2000, the technology of automation periphery is from Japan. RUIHUI has been learning Japan and Germany technology, and using high standards of principle in the parts selection, for assembly process and spare parts, adhere to the requirements in accordance with the origina...
Get in touch with us
Leave a Message, we will call you back quickly!