GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability | 30 Sets Per Month |
| Delivery Time | 30 work days |
| Packaging Details | Wooden Box or Vacuum Packing |
| Stock Width(mm) | 70-1000 |
| Stock Thickness(mm) | 0.6-6.0 |
| Line Speed(m/min) | 16~24 |
| Coil Weight(Kg) | 7000 |
| Work Roll Number(Pcs) | upper 6/lower 5 |
| Main Motor(Kw) | AC 11.0 |
| Warranty Period | 12 Months |
| Max.Coil O.D.(mm) | 1400 |
| Coil I.D.(mm) | 508 |
| Feed Length(mm) | ~500* |
| Mandrel Expansion | Hydrauilc |
| Reel Motor(kw) | 2.2 |
| Operating Air(Mpa) | 0.49 |
| Brand Name | RUIHUI |
| Certification | CE, ISO certification |
| Place of Origin | Guangdong, China (Mainland) |
View Detail Information
Explore similar products
Metal Sheet Coil Decoiler Straightener Feeder For Press Machine
High Performance NC Metal Sheet Feeder Stamping Processing Automation Equipment
3 In 1 0.49Mpa Feeder Sheet Decoiling Machine
Vertical Material Rack Straightening Machine , Coil Feeder Metal Material
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram | Supply Ability | 30 Sets Per Month |
| Delivery Time | 30 work days | Packaging Details | Wooden Box or Vacuum Packing |
| Stock Width(mm) | 70-1000 | Stock Thickness(mm) | 0.6-6.0 |
| Line Speed(m/min) | 16~24 | Coil Weight(Kg) | 7000 |
| Work Roll Number(Pcs) | upper 6/lower 5 | Main Motor(Kw) | AC 11.0 |
| Warranty Period | 12 Months | Max.Coil O.D.(mm) | 1400 |
| Coil I.D.(mm) | 508 | Feed Length(mm) | ~500* |
| Mandrel Expansion | Hydrauilc | Reel Motor(kw) | 2.2 |
| Operating Air(Mpa) | 0.49 | Brand Name | RUIHUI |
| Certification | CE, ISO certification | Place of Origin | Guangdong, China (Mainland) |
| High Light | coil feeder straightener ，coil handling equipment | ||
High - Speed NC Decoiler Straightener Feeder Air Pressure Device Punching Processing
1. After the NC feeder feeding parameter setting is completed, if it is not necessary to change the feeding length, just enter the operation screen after booting, press F6 to switch to the automatic state, and start production.
2. For the need to control the press, it is necessary to connect according to the needs of the site. The 220V solenoid valve or electromagnet can be used to set the cut-off time on the special screen, and the electromagnet or solenoid valve can be directly connected to the terminal of the electric box 14 and 15 .
The use of a 24V solenoid valve requires the solenoid valve to be connected to terminals 24 and 13. For the control of 380V electromagnet, one of the electromagnets needs to be disconnected and connected to terminals 10 and 10. The power supply of the electromagnet is supplied by the original machine, and the NC electric box only provides a switch signal for control.
3. NC feeder feeding signal is generally recommended to trigger the signal between 9:3 and 3 o'clock. Relax and relax when the mold pin is inserted into the mold, and clamp at the bottom dead center.
4. During the use, check or repair the air pressure device of the NC feeder. The air source must be turned off and the residual air removed.
Specifications:
| Model | MAC4-600F | MAC4-800F | MAC4-1000F | MAC4-1300F |
| Stock Width(mm) | 70~600 | 70~800 | 70~1000 | 70~1300 |
| Stock Thickness(mm) | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 |
| Max.Coil Weight(kg) | 5000 | 5000 | 7000 | 10000 |
| Max.Coil O.D.(mm) | 1400 | 1400 | 1400 | 1400 |
| Coil I.D.(mm) | 508 | 508 | 508 | 508 |
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* |
| Max.Line Speed(m/min) | 16~24 | 16~24 | 16~24 | 16~24 |
| Work Roll Number(piece) | upper 6/lower 5 | upper 6/lower 5 | upper 6/lower 5 | upper 6/lower 5 |
| Feed Roll number(set) | 1 | 1 | 1 | 1 |
| Main Motor | AC7.5 | AC11.0 | AC11.0 | AC11.0 |
| Mandrel Expansion | Hydrauilc | Hydrauilc | Hydrauilc | Hydrauilc |
| Reel Motor(kw) | 2.2 | 2.2 | 3.7 | 7.5 |
| Power(v) | 3 Phase 220V/380V/50HZ | |||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straightening Performance:
| Model | MAC4-600F | MAC4-800F | MAC4-1000F | MAC4-1300F | |
| Stock Thickness (mm) | 0.8~2.3 | 600 | 800 | 1000 | 1300 |
| 2.8 | 933 | 933 | |||
| 3.2 | 714 | 714 | 714 | ||
| 4.0 | 457 | 457 | 457 | 457 | |
| 4.5 | 361 | 361 | 361 | 361 | |
| 5.0 | 293 | 293 | 293 | 293 | |
| 6.0 | 203 | 203 | 203 | 203 | |
Products:
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer,Exporter,Trading Company,Seller
Year Established:
2000
Total Annual:
30000000-50000000
Employee Number:
200~300
Ecer Certification：
Active Member
RUIHUI founded in 2000, the technology of automation periphery is from Japan. RUIHUI has been learning Japan and Germany technology, and using high standards of principle in the parts selection, for assembly process and spare parts, adhere to the requirements in accordance with the origina... RUIHUI founded in 2000, the technology of automation periphery is from Japan. RUIHUI has been learning Japan and Germany technology, and using high standards of principle in the parts selection, for assembly process and spare parts, adhere to the requirements in accordance with the origina...
Get in touch with us
Leave a Message, we will call you back quickly!