Primed Wood Architrave Moulding 2.44m Decorative Door Frame Trim KD Finger

GTR Primed Wood Architrave Moulding is a decorative door frame trim produced from kiln-dried, finger-jointed pine. The 2.44m lengths are sealed and sanded at the factory, so fitters can install and paint in a single visit and keep labour costs down on repetitive openings. With its defined moulded edge, the profile reads as a decorative frame rather than a plain batten, which lifts the perceived quality of a completed interior.

Architrave is the visible border that surrounds a door frame and disguises the joint between the frame and the wall. It is handled and viewed constantly, so it needs to be straight, robust and easy to finish. By machining the profile from stable finger-jointed stock and priming it in the factory, GTR reduces the risk of wavy edges, knot shadows and inconsistent paint absorption, helping contractors deliver a clean handover on every site.

• Decorative Moulded Edge: A defined profile frames each opening and raises the perceived quality of the finish.
• Factory Primed: Sealed faces and edges allow install and paint in a single site visit.
• Straight And Stable: Finger-jointed, kiln-dried pine keeps long legs flat and true after fitting.
• Matched Sets: Uprights and heads are cut from the same stock for consistent reveals.
• Quick Fixing: Light sections cut, mitre and nail easily with standard carpentry tools.
• Smooth Paint Base: Sanded primer accepts water-based and oil-based paints with low build.

The architrave is specified for houses, apartments, hotels and offices where doors are trimmed to a common detail. It also suits refurbishment projects where new trim must blend with existing frames and plaster. Because the profile is symmetrical, it can be fitted on either side of a reveal and still present a balanced face to the room, which simplifies ordering and reduces waste.

Bundles are shrink-wrapped with corner guards and stacked on export plywood pallets for container loading. A moisture barrier keeps the primed faces clean and dry through long sea voyages. Each batch is inspected for profile accuracy, priming quality and edge condition, and inspection records are retained so any buyer query can be traced to its production run.

Widths, thicknesses and section shapes can be customised to match existing architecture, and new tooling can be made from a drawing or sample. Free samples are provided for approval before bulk production. Architrave can be combined with matching baseboard and casing profiles in one container, and our team will confirm quantities, tooling lead time and packing in the order acknowledgement.