Dengfeng (XinXing) Trading Co., Limited
| Packaging Details | Anti-static Bag + Carton Box + Foam Protection |
| Accuracy | ±0.25% Full Scale |
| Mountingtype | Flush or Flush with diaphragm |
| Supply Ability | 10 Units per Month |
| Type | Pressure Transducer |
| Responsetime | Less than 1 ms |
| Application | Plastic extrusion, injection molding |
| Delivery Time | 7-14 Days |
| Pressuretype | Gauge or Absolute |
| Electricalconnection | Integral Cable or Connector |
| Productname | Dynisco Melt Pressure Transducer |
| Model Number | PT4624-3.5M-6/18-SIL2 |
| Brand Name | Dynisco |
| Certification | CE |
| Place of Origin | USA |
View Detail Information
Explore similar products
MDT422F-1/2-2C-15/46 Dynisco Flexible Capillary Melt Pressure Transmitter 200
Dynisco TPT463E-3.5M-6/18 Melt Pressure and Temperature Transducer
MDT420F-1/2-2C-15 Dynisco Amplified Melt Pressure Transmitter 200 bar
MDT462F-1/2-2C-15/46 Dynisco Capillary Melt Pressure Transmitter 200 bar
Product Specification
| Packaging Details | Anti-static Bag + Carton Box + Foam Protection | Accuracy | ±0.25% Full Scale |
| Mountingtype | Flush or Flush with diaphragm | Supply Ability | 10 Units per Month |
| Type | Pressure Transducer | Responsetime | Less than 1 ms |
| Application | Plastic extrusion, injection molding | Delivery Time | 7-14 Days |
| Pressuretype | Gauge or Absolute | Electricalconnection | Integral Cable or Connector |
| Productname | Dynisco Melt Pressure Transducer | Model Number | PT4624-3.5M-6/18-SIL2 |
| Brand Name | Dynisco | Certification | CE |
| Place of Origin | USA |
The Dynisco PT4624-3.5M-6/18-SIL2 is a lower-range two-wire melt-pressure transmitter with a nominal pressure range of 0 to 3,500 psi and a 4-20 mA output. It is intended for processes where a lower full-scale range can provide more useful pressure resolution than 5,000 or 10,000 psi versions.
The device uses a rigid sensing stem and flexible capillary to separate the electronics housing from the high-temperature process area. The SIL2 suffix identifies a safety-oriented configuration, subject to validation within the complete control and safety system.
| Complete Model | PT4624-3.5M-6/18-SIL2 |
| Pressure Range | 0 to 3,500 psi |
| Signal Output | Two-wire 4-20 mA |
| Process Thread | 1/2-20 UNF |
| Stem Arrangement | Rigid stem with flexible capillary |
| Safety Configuration | SIL2 device configuration |
| Maximum Diaphragm Temperature | Up to 400 degrees C |
A lower pressure range can improve control resolution when the process normally operates below 3,500 psi. The selection must still provide adequate margin for startup peaks, blocked-screen conditions and process disturbances. The model should not replace a higher-range transmitter without confirming actual maximum pressure.
Confirm maximum operating pressure, transient peaks, 4-20 mA scaling, loop supply, load resistance, mechanical dimensions, connector pinout and process thread. Review the applicable SIL documentation and proof-test requirements for safety-related use.
Provide the complete nameplate, process-pressure range, connected PLC or controller and safety-document requirements before ordering.
Company Details
Business Type:
Exporter,Trading Company,Seller
Year Established:
2024
Total Annual:
1000000-1500000
Employee Number:
10~25
Ecer Certification：
Site Member
Company Profile DF Automatic supplies industrial automation spare parts, control system components, and replacement parts to customers worldwide. Our product range covers PLC modules, servo drives, servo motors, variable frequency drives, HMI panels, industrial sensors, pneumatic components, h... Company Profile DF Automatic supplies industrial automation spare parts, control system components, and replacement parts to customers worldwide. Our product range covers PLC modules, servo drives, servo motors, variable frequency drives, HMI panels, industrial sensors, pneumatic components, h...
Get in touch with us
Leave a Message, we will call you back quickly!