Danfoss 131F8139 FC-302P11KT5E20H2XGCXXXSXXXXAXBXCXXXXDX VLT AutomationDrive

Product Specification

Product Overview

The Danfoss 131F8139 is an exact VLT AutomationDrive FC 302 frequency-converter configuration identified by the complete type code FC-302P11KT5E20H2XGCXXXSXXXXAXBXCXXXXDX.

This drive is rated for 11 kW / 15 HP high-overload applications and operates from a three-phase 380-500 VAC mains supply. The drive can also support a higher normal-overload power rating when permitted by the application and motor-current requirements.

The E20 enclosure code identifies an IP20 chassis configuration. The complete type code includes an H2 RFI Class A2 (C3) filter, no brake chopper, graphical local control panel, coated PCB and no additional mains option.

Common procurement searches include 131F8139, FC-302P11KT5E20H2XGCXXXSXXXXAXBXCXXXXDX, FC-302P11KT5, Danfoss FC302 11kW, FC302 15HP and VLT AutomationDrive FC 302 IP20.

Main Features

• Danfoss commercial reference: 131F8139
• Complete type code: FC-302P11KT5E20H2XGCXXXSXXXXAXBXCXXXXDX
• Short search model: FC-302P11KT5
• VLT AutomationDrive FC 302 product family
• 11 kW / 15 HP high-overload power class
• Three-phase 380-500 VAC mains supply
• E20 IP20 chassis enclosure
• H2 RFI Class A2 (C3) filter
• No brake chopper
• Graphical local control panel included
• Coated PCB configuration
• No additional mains option
• No additional communication or motion-control option
• B3 frame size

Technical Specifications

Compatible System and Applications

The 131F8139 can be evaluated for conveyors, extruders, mixers, winding systems, packaging lines, compressors, pumps, fans, machine tools and other industrial applications requiring accurate speed, torque or process control.

For high-overload machinery, the 11 kW rating should be assessed against the motor full-load current, starting torque, acceleration time, operating cycle and environmental derating. The normal-overload rating must not be used without checking the actual motor and load profile.

The IP20 chassis requires installation in a suitable cabinet. The cabinet must provide adequate cooling and environmental protection and must maintain the required clearance around the drive.

Maintenance and Replacement Notes

For an exact replacement, confirm both 131F8139 and FC-302P11KT5E20H2XGCXXXSXXXXAXBXCXXXXDX on the original nameplate.

Other FC-302P11KT5 models may use an IP21, IP55 or IP66 enclosure, H1 filter, brake chopper, uncoated PCB, different LCP or installed fieldbus and I/O options.

This model has no brake chopper. Where an existing machine uses an external braking resistor, verify whether the original drive contains different braking hardware before replacement.

Back up the complete parameter set, including motor identification, vector-control parameters, encoder information, current limits, speed and torque references, ramps, terminal assignments, safety configuration and communication settings.

Related Models

The related 15 kW configuration 131F8140 uses the same E20, H2, graphical-LCP and coated-PCB configuration with a higher power rating.

Other FC-302P11KT5 variants with different brake, LCP, coating, enclosure or option codes must remain separate exact-SKU product pages.

Inquiry and Supply Notes

Please provide the complete original nameplate, motor nameplate, required quantity, machine application, overload requirement, feedback device, braking system, fieldbus protocol and parameter backup.

Confirm whether the exact IP20 enclosure, H2 filter, graphical LCP, coated PCB and no-brake configuration are mandatory.

Exact condition, testing scope, included accessories, firmware, warranty, packaging and delivery time must be confirmed before quotation.