Schneider ELAU SH31404P01A2000 PacDrive SH140/30330 Servo Motor

Product Specification

Product Overview

The Schneider ELAU SH31404P01A2000 is the standard base reference for the highest-torque PacDrive SH140/30330 motor platform. It corresponds to the legacy technical model SH140/30330/0/0/00/00/00/00/00 and ELAU article number 65014402V001004.

This 4-stack servo motor provides approximately 4.04 kW continuous power, 12.9 Nm nominal torque and 33.4 Nm continuous stall torque. Its peak torque reaches approximately 131.9 Nm, making it the highest peak-torque platform within the listed SH140 series.

The standard configuration uses a smooth steel shaft, SKS36 single-turn feedback, no holding brake and IP54 shaft with IP65 housing protection.

Main Features

• Exact commercial reference: SH31404P01A2000
• Legacy model: SH140/30330/0/0/00/00/00/00/00
• ELAU article number: 65014402V001004
• PacDrive SH140 4-stack high-torque servo motor
• Continuous power: approximately 4.04 kW
• Nominal speed: 3000 RPM
• Nominal torque: approximately 12.9 Nm
• Continuous stall torque: approximately 33.4 Nm
• Peak torque: approximately 131.9 Nm
• Smooth steel shaft
• SKS36 single-turn feedback system
• Without holding brake
• IP54 shaft and IP65 housing configuration

Technical Specifications

Compatible System and Applications

The SH31404P01A2000 is intended for high-torque PacDrive machine axes. Typical applications include heavy rotary positioning systems, large packaging equipment, printing and converting machinery, indexing tables, gearbox-driven production equipment and automated material-handling systems.

The installed servo drive must be evaluated for the required continuous and peak motor currents, feedback interface, acceleration profile, load inertia and regenerative-energy conditions.

The smooth shaft requires a suitable keyless coupling. Confirm mechanical dimensions, alignment, shaft loading, motor flange and driven-equipment specifications before installation.

Maintenance and Replacement Notes

Verify the full SH31404P01A2000 reference and article number. Other SH140/30330 motors can have materially different shaft, feedback, brake and protection configurations.

Confirm the single-turn encoder and non-brake construction. A brake-equipped version requires a compatible brake-control circuit, while a multi-turn feedback version may require different controller parameters and reference procedures.

Inspect the motor cable, feedback cable, connectors, protective earth, bearings, shaft and driven mechanism. Verify the servo-drive model, controller project and complete machine configuration before commissioning.

Related Models

Related SH140/30330 models include keyed-shaft configurations, SKM36 multi-turn feedback versions, holding-brake versions and models with IP65 shaft or IP67 housing protection.

SH31404P02F2200 is the related smooth-shaft, multi-turn, 36 Nm brake and IP67 configuration. SH31404P12F2000 is a related keyed-shaft, multi-turn and brake configuration.

Inquiry and Supply Notes

Please provide photographs of the complete nameplate, shaft, flange and connectors. Also provide the installed servo-drive model, motor and feedback cables and machine application details.

The exact commercial reference, encoder, shaft, brake configuration, hardware revision, product condition, testing status, availability and delivery time must be confirmed before quotation.