Dengfeng (XinXing) Trading Co., Limited
| Packaging Details | Anti-static Bag + Carton Box + Foam Protection |
| Installation / Interface | Ball-Tip Probe; Three-Wire Screened Cable |
| Primary Function | Short-Stroke Contact Displacement Measurement |
| Brand | Gefran |
| Ordering Requirement | Verify F004215, S01M Cable Length, Stroke and Full Configuration |
| Supply Ability | 2 Units per Month |
| Product Type | Cable-Connected Spring-Return Position Transducer |
| Key Specification | 10 mm Stroke; 1 m Screened Cable |
| Payment Terms | T/T |
| Series / Control Platform | PY2 Series |
| Delivery Time | 7-14 Days |
| Model | PY-2-F-010-S01M 0000X000X00 |
| Model Number | PY-2-F-010-S01M 0000X000X00 |
| Place of Origin | USA |
| Brand Name | Gefran |
View Detail Information
Explore similar products
Gefran LT-M-0100-S 0000X000X00 Linear Position Transducer
Gefran PY-2-C-010 0000X000X00 Spring-Return Transducer
Gefran PY-2-F-025-S01M 0000X000X00 25 mm Transducer
Gefran PY-2-C-025 0000X000X00 25 mm Position Transducer
Product Specification
| Packaging Details | Anti-static Bag + Carton Box + Foam Protection | Installation / Interface | Ball-Tip Probe; Three-Wire Screened Cable |
| Primary Function | Short-Stroke Contact Displacement Measurement | Brand | Gefran |
| Ordering Requirement | Verify F004215, S01M Cable Length, Stroke and Full Configuration | Supply Ability | 2 Units per Month |
| Product Type | Cable-Connected Spring-Return Position Transducer | Key Specification | 10 mm Stroke; 1 m Screened Cable |
| Payment Terms | T/T | Series / Control Platform | PY2 Series |
| Delivery Time | 7-14 Days | Model | PY-2-F-010-S01M 0000X000X00 |
| Model Number | PY-2-F-010-S01M 0000X000X00 | Place of Origin | USA |
| Brand Name | Gefran |
The Gefran PY-2-F-010-S01M 0000X000X00 is a compact PY2 spring-return position transducer configured with a 10 mm stroke and a factory-connected 1 m screened cable. The verified Gefran ordering number is F004215.
This cable-equipped configuration is particularly relevant where a detachable DIN connector would be too large, exposed to contamination or inconveniently positioned. The ball-tipped probe follows short linear movement and returns automatically as the measured surface retracts.
| Complete Model | PY-2-F-010-S01M 0000X000X00 |
| Ordering Number | F004215 |
| Series | PY2 |
| Electrical Stroke | 10 mm |
| Electrical Connection | Three-wire screened cable |
| Cable Length | 1 m |
| Probe Tip | Stainless-steel ball, M2.5 thread |
| Resolution | Infinite |
| Maximum Displacement Speed | Up to 10 m/s |
| Operating Temperature | -30 to +100°C |
Route the screened cable away from power conductors, switching devices and sharp moving edges. The cable should be secured without tension near the sensor body and must not be used as a mechanical support. Shield termination should follow the machine grounding design to minimize electrical noise and avoid an unintended ground loop.
Align the probe with the target movement. Establish only the preload needed to maintain contact and protect the 10 mm mechanism against overtravel. The control rod must return smoothly without sticking.
PY-2-C-010 0000X000X00 F004190 uses a 5-pole DIN 43322 connector rather than a fixed cable. PY-2-F-010-S02M F004221 has a 2 m cable, while PY-2-F-010-S10M F004214 has a 10 m cable. Cable length affects installation and ordering identity even when the stroke is unchanged.
Listings containing additional suffixes such as XL0202 or XL0323 are not the same complete configuration as F004215 and should not be consolidated into this product page.
Confirm the cable sheath is undamaged and inspect the ball tip for flat spots or contamination. Before replacement, record conductor functions and check the controller input scaling. Do not identify this unit from “PY-2-F-010" alone; verify S01M, 0000X000X00 and F004215.
Related models are provided for family reference only and are not automatically interchangeable.
Provide the full nameplate and photographs showing the cable entry and probe tip. Suggested internal-link anchor text is “Gefran PY2 10 mm Screened-Cable Position Transducer." Availability and condition must be confirmed in the quotation.
Company Details
Business Type:
Exporter,Trading Company,Seller
Year Established:
2024
Total Annual:
1000000-1500000
Employee Number:
10~25
Ecer Certification：
Site Member
Company Profile DF Automatic supplies industrial automation spare parts, control system components, and replacement parts to customers worldwide. Our product range covers PLC modules, servo drives, servo motors, variable frequency drives, HMI panels, industrial sensors, pneumatic components, h... Company Profile DF Automatic supplies industrial automation spare parts, control system components, and replacement parts to customers worldwide. Our product range covers PLC modules, servo drives, servo motors, variable frequency drives, HMI panels, industrial sensors, pneumatic components, h...
Get in touch with us
Leave a Message, we will call you back quickly!