Dengfeng (XinXing) Trading Co., Limited
| Packaging Details | Anti-static Bag + Carton Box + Foam Protection |
| Installation / Interface | 1/2-20 UNF; 6-Inch Stem; 18-Inch Capillary |
| Primary Function | Melt Pressure Measurement with Remote Housing Position |
| Brand | Gefran |
| Ordering Requirement | Verify F008650, Capillary Length, Range and Connector |
| Payment Terms | T/T |
| Series / Control Platform | M3 Series |
| Delivery Time | 7-14 Days |
| Model | M31-6-M-P05M-1-4-D 2130X000X00 |
| Supply Ability | 2 Units per Month |
| Product Type | Flexible-Capillary Melt Pressure Transducer |
| Key Specification | 0–5000 psi; 3.33 mV/V; 0.5% FSO Accuracy Class |
| Model Number | M31-6-M-P05M-1-4-D 2130X000X00 |
| Place of Origin | USA |
| Brand Name | Gefran |
View Detail Information
Explore similar products
Gefran M31-6-M-P10M-1-4-D 2130X000X00 10000 psi Transducer
Gefran W31-6-M-P10M-1-4-D 2130X000X00 Oil-Filled Transducer
Gefran K31-6-M-P05M-1-4-D-H 2130X000X00 NaK Transducer
Gefran K31-6-M-B02C-1-4-D-S Melt Pressure Transducer 200 Bar
Product Specification
| Packaging Details | Anti-static Bag + Carton Box + Foam Protection | Installation / Interface | 1/2-20 UNF; 6-Inch Stem; 18-Inch Capillary |
| Primary Function | Melt Pressure Measurement with Remote Housing Position | Brand | Gefran |
| Ordering Requirement | Verify F008650, Capillary Length, Range and Connector | Payment Terms | T/T |
| Series / Control Platform | M3 Series | Delivery Time | 7-14 Days |
| Model | M31-6-M-P05M-1-4-D 2130X000X00 | Supply Ability | 2 Units per Month |
| Product Type | Flexible-Capillary Melt Pressure Transducer | Key Specification | 0–5000 psi; 3.33 mV/V; 0.5% FSO Accuracy Class |
| Model Number | M31-6-M-P05M-1-4-D 2130X000X00 | Place of Origin | USA |
| Brand Name | Gefran |
The Gefran M31-6-M-P05M-1-4-D 2130X000X00 is a mercury-filled melt pressure transducer with a 5000 psi full-scale range, 6-inch rigid stem and 18-inch flexible capillary. The verified Gefran ordering number is F008650.
The flexible section allows the electrical housing to be positioned away from the immediate process connection. This is useful on extrusion equipment where direct mounting would expose the housing to excessive radiant heat or create mechanical-clearance problems.
| Complete Model | M31-6-M-P05M-1-4-D 2130X000X00 |
| Ordering Number | F008650 |
| Series | M3 |
| Filling System | Mercury-filled hydraulic transmission |
| Pressure Range | 0–5000 psi |
| Output Signal | 3.33 mV/V |
| Accuracy Class | 0.5% FSO |
| Electrical Connector | 6-pin |
| Process Connection | 1/2-20 UNF |
| Rigid Stem Length | 6 inches / approximately 153 mm |
| Flexible Capillary Length | 18 inches / approximately 457 mm |
The flexible capillary must be routed without sharp bends, twisting, crushing or repeated movement. It should not support the electrical housing or be pulled during installation. The housing requires separate mechanical support where the machine arrangement does not provide a stable mounting position.
Confirm that the 6-inch stem reaches the required sensing location and that the 18-inch flexible length is sufficient to place the housing outside the highest-temperature zone. A longer capillary is not automatically better because excessive unsupported length can increase mechanical vulnerability.
This transducer requires a strain-gauge-compatible input. Verify bridge excitation, signal polarity, six-pin connector wiring, cable shielding and input sensitivity. A controller configured for a 4–20 mA transmitter cannot read this mV/V device directly without appropriate signal conditioning.
Check the complete 2130X000X00 suffix and F008650 rather than identifying the product only as M31. Accuracy class, connector type, thread, stem and flexible length are encoded parts of the ordered construction. Inspect the diaphragm and capillary for deformation before installation.
M30-6-M-P05M-1-4-0 F008531 provides the same nominal range with no flexible capillary. M31-6-M-P10M-1-4-D F008653 increases the full-scale range to 10,000 psi. M32 configurations may include a temperature-measurement element and require different wiring.
Related models are provided for family reference only and are not automatically interchangeable.
Send clear photographs of the nameplate, diaphragm, rigid stem, capillary and connector. Confirm regional suitability of the mercury-filled design and request calibration documentation when required. Product condition and delivery must be established for the individual quotation.
Company Details
Business Type:
Exporter,Trading Company,Seller
Year Established:
2024
Total Annual:
1000000-1500000
Employee Number:
10~25
Ecer Certification：
Site Member
Company Profile DF Automatic supplies industrial automation spare parts, control system components, and replacement parts to customers worldwide. Our product range covers PLC modules, servo drives, servo motors, variable frequency drives, HMI panels, industrial sensors, pneumatic components, h... Company Profile DF Automatic supplies industrial automation spare parts, control system components, and replacement parts to customers worldwide. Our product range covers PLC modules, servo drives, servo motors, variable frequency drives, HMI panels, industrial sensors, pneumatic components, h...
Get in touch with us
Leave a Message, we will call you back quickly!