Dengfeng (XinXing) Trading Co., Limited
| Packaging Details | Anti-static Bag + Carton Box + Foam Protection |
| Installation / Interface | Stainless-Steel Ball Probe; Three-Wire Cable |
| Primary Function | Continuous Contact Measurement over 50 mm Travel |
| Brand | Gefran |
| Ordering Requirement | Verify F004242, Cable Length, Stroke, Scaling and Suffix |
| Supply Ability | 2 Units per Month |
| Product Type | Cable-Connected Spring-Return Position Transducer |
| Key Specification | 50 mm Stroke; 1 m Screened Cable |
| Payment Terms | T/T |
| Series / Control Platform | PY2 Series |
| Delivery Time | 7-14 Days |
| Model | PY-2-F-050-S01M 0000X000X00 |
| Model Number | PY-2-F-050-S01M 0000X000X00 |
| Place of Origin | USA |
| Brand Name | Gefran |
View Detail Information
Explore similar products
Gefran LT-M-0100-S 0000X000X00 Linear Position Transducer
Gefran PY-2-C-010 0000X000X00 Spring-Return Transducer
Gefran PY-2-F-025-S01M 0000X000X00 25 mm Transducer
Gefran PY-2-C-025 0000X000X00 25 mm Position Transducer
Product Specification
| Packaging Details | Anti-static Bag + Carton Box + Foam Protection | Installation / Interface | Stainless-Steel Ball Probe; Three-Wire Cable |
| Primary Function | Continuous Contact Measurement over 50 mm Travel | Brand | Gefran |
| Ordering Requirement | Verify F004242, Cable Length, Stroke, Scaling and Suffix | Supply Ability | 2 Units per Month |
| Product Type | Cable-Connected Spring-Return Position Transducer | Key Specification | 50 mm Stroke; 1 m Screened Cable |
| Payment Terms | T/T | Series / Control Platform | PY2 Series |
| Delivery Time | 7-14 Days | Model | PY-2-F-050-S01M 0000X000X00 |
| Model Number | PY-2-F-050-S01M 0000X000X00 | Place of Origin | USA |
| Brand Name | Gefran |
The Gefran PY-2-F-050-S01M 0000X000X00 is a PY2 spring-return potentiometric transducer with a 50 mm useful electrical stroke and a 1 m screened connection cable. The exact Gefran ordering number is F004242.
This configuration combines the longest stroke among the three selected S01M versions with direct ball-tip contact measurement. It can monitor a moving surface continuously where a fixed connector would complicate installation or where the signal cable must be routed directly to a junction box or control cabinet.
| Complete Model | PY-2-F-050-S01M 0000X000X00 |
| Ordering Number | F004242 |
| Series | PY2 |
| Electrical Stroke | 50 mm |
| Independent Linearity | Up to ±0.1% |
| Resolution | Infinite |
| Maximum Displacement Speed | Up to 10 m/s |
| Operating Temperature | -30 to +100°C |
| Electrical Connection | Three-wire screened cable |
| Cable Length | 1 m |
| Tip Construction | M2.5 stainless-steel ball |
The machine must provide enough axial space for the sensor body and full probe movement. Determine the minimum and maximum target positions before mounting. If the mechanism can exceed 50 mm, use a mechanical limit or alternative protection so that machine overtravel is not transferred into the transducer.
The target should contact the central area of the ball tip. Sideways sliding, misalignment or repeated impact can damage the rod supports. After mounting, operate the mechanism slowly through its full cycle and confirm that the probe remains within range.
Route the 1 m screened cable separately from drive outputs, contactor wiring and other high-noise conductors. The screen connection should follow the control-system grounding plan. Verify excitation, signal direction and analogue scaling; the published maximum voltage is not necessarily the correct operating supply for the installed machine.
PY-2-F-025-S01M 0000X000X00 F004228 provides 25 mm travel with the same nominal cable length. PY-2-C-050 0000X000X00 F004207 uses a DIN 43322 connector rather than a permanently attached cable. F004248 and F004249 correspond to 50 mm PY2 versions with S02M and S03M cable configurations.
PY3 50 mm products use a bearing-type contact tip instead of the PY2 ball tip. The difference may affect contact geometry and suitability for a moving target surface.
Confirm F004242, the full 0000X000X00 suffix, S01M cable length, 50 mm stroke and ball-tip construction. Check the original label rather than relying on a shortened marketplace title. Additional XL suffixes, alternative cable lengths and connector versions must be treated as separate configurations.
Related models are provided for family reference only and are not automatically interchangeable.
Provide nameplate, cable-entry and probe-tip photographs with the inquiry. Suggested internal-link anchor text is “Gefran PY2 50 mm Screened-Cable Position Transducers." Inventory, product condition and delivery time require quotation-stage confirmation.
Company Details
Business Type:
Exporter,Trading Company,Seller
Year Established:
2024
Total Annual:
1000000-1500000
Employee Number:
10~25
Ecer Certification：
Site Member
Company Profile DF Automatic supplies industrial automation spare parts, control system components, and replacement parts to customers worldwide. Our product range covers PLC modules, servo drives, servo motors, variable frequency drives, HMI panels, industrial sensors, pneumatic components, h... Company Profile DF Automatic supplies industrial automation spare parts, control system components, and replacement parts to customers worldwide. Our product range covers PLC modules, servo drives, servo motors, variable frequency drives, HMI panels, industrial sensors, pneumatic components, h...
Get in touch with us
Leave a Message, we will call you back quickly!