Schneider Masterpact MT Electrical Interlock 29352 Ensuring Safe and Sequential

Product Specification

Schneider Electric Masterpact MT Air Circuit Breaker Accessory: Electrical Interlock 29352 (IVE - 48..415 V AC 50/60 Hz)

The Masterpact MT Electrical Interlock 29352 is a critical safety and operational accessory designed for Schneider Electric’s high-performance Masterpact MT air circuit breakers. This interlock ensures sequential operation of multiple circuit breakers within complex electrical distribution systems, preventing hazardous scenarios like backfeeding or parallel source energization. Rated for 48–415 V AC at 50/60 Hz, it provides robust interoperability across diverse global power systems. Below is a detailed technical and functional analysis of this essential component.

Core Functionality and Design Philosophy

The 29352 electrical interlock enforces logical dependency between two or more Masterpact MT breakers through electromechanical control. Its primary safety objectives include:

• Preventing Source Synchronization: Blocks simultaneous closure of main and backup sources (e.g., grid vs. generator).

• Isolating Maintenance Zones: Ensures downstream breakers open before upstream ones during shutdown sequences.

• Avoiding Backfeed Hazards: Eliminates risk of reverse current flow during transfer switching.

Unlike mechanical interlocks (e.g., Schneider’s NS series "two-lock-one-key" systems1), the 29352 uses voltage-sensing coils (48–415 V AC) to dynamically monitor circuit states. This enables remote operation compliance without manual intervention.

Technical Specifications and Compatibility

Table: Key Parameters of Electrical Interlock 29352

Installation and Configuration

1. Integration with Masterpact MT Breakers

The 29352 interlock interfaces with breaker control units via auxiliary contacts (e.g., OF/SD/SDE signals). Key connections:

• Coil Terminals: Connect to monitored voltage sources (e.g., Bus PT outputs).

• Interlock Logic Links: Daisy-chained between breakers using shielded cables.

• Shielding Ground: Terminal 21 (analogous to Daikin PMC LVDT grounding1).

2. Sequential Logic Programming

The interlock enforces user-defined dependencies:

• Priority-Based Closure: Only one "master" breaker closes first; others await its open signal.

• Fault Overrides: Manual release key (optional) bypasses interlock during emergencies.

3. Voltage Threshold Calibration

Adjustable sensitivity ensures reliable operation under:

• Undervoltage: Blocks closure if source <48 V AC.

• Overvoltage: Tolerates surges ≤415 V AC without damage1.

Application Scenarios

Critical Infrastructure: Data Center ATS Systems

In dual-fed data centers, the 29352 prevents generator-grid synchronization:

  Grid Breaker (Q1) → Interlock 29352 → Generator Breaker (Q2)

• Q1 closed → Q2 blocked

• Q1 opens → Q2 enabled after 2-sec delay (prevents arcing)

Industrial Manufacturing: Process Line Transfers

For conveyor sections powered by redundant sources:

• Interlock Logic: Section 1 opens → Section 2 closes automatically.

• Safety Margin: MIN/MAX trimmers limit transfer current ≤300 mA1.

Renewable Integration: Solar/Grid Switching

Ensures grid disconnection before islanded solar energization (per IEEE 1547).

Advantages Over Competing Solutions

Safety and Compliance

• IEC 60947-2: Certified for circuit-breaker interlocking.

• Arc Flash Mitigation: Reduces incident energy by preventing fault currents during transfers.

• Fail-Safe Design: Open-coil state defaults to "block" mode (de-energized-safe).

Conclusion: Enabling Smarter Power Management

The Masterpact MT Electrical Interlock 29352 transcends traditional safety devices by merging voltage-adaptive intelligence with seamless automation readiness. Its broad voltage range (48–415 V AC) accommodates everything to industrial machinery to backup generators, while eliminating human error in switching sequences. For engineers designing mission-critical power systems—where a single misoperation can trigger downtime or hazards—this interlock delivers uncompromising operational discipline. As facilities evolve toward IoT-enabled energy management, the 29352 provides the foundational logic layer for safe, automated distribution.