Xinrui-Pate Diamond Compound Paste for Polishing and Grinding Gross Weight 0

Grinding and polishing paste, also known as diamond abrasive paste, is finely formulated with diamond micropowder and other raw materials. It is an ideal abrasive paste for grinding and polishing, and has good lubricating and cooling properties.

For different rough plating on the surface of the workpiece, the use of non-abrasive paste to start the hand, generally need to be matched with 3-5 kinds of grinding and polishing gradually from coarse to fine W0.25 the smallest W60 the largest
W60 (220 mesh) Super coarse plastic W50/ (280 mesh) coarse plastic
W40 (320 mesh) Rough polishing W28(400 mesh) rough polishing
W20(600 mesh) Medium polish W14 (800 mesh) Medium polish
W10 (1000 mesh) Medium polish W7 (1500 mesh) Fine polish
W5 (2000 mesh) Fine polishing W3.5(3000 mesh) Fine polishing
W2.5(4000 mesh) Fine polishing W1.5(6000 mesh) Mirror polishing W1 (8000 mesh) Mirror polishing W.5 (10000 mesh) Super mirror polishing W0.25(20000 mesh) Super mirror polishing
1) settlement. 25, the optimizer. 5, W1, W1.5, W2.5, W3.5 the six models are very thin, is suitable for the jade surface is smooth, fine polishing of metal. Normal jade and other items only W3.5 can achieve close to the mirror effect, if continue to use W1.5 fine polishing, you can reach the mirror; Normal tools and other metal smooth surface with W2.5 polishing, can achieve close to the mirror effect, if combined with W1 polishing, it can achieve super mirror effect.
(2) W5,W7,W10, relatively fine, choose W5 for glass polishing,W7 for ceramics. These 3 models are also suitable for rough polishing of less smooth jade, metal surfaces

(3) W14, W20, W28 these three models are relatively thick, suitable for jade, metal rough surface grinding.
(4) W40, W50, W60, mainly used for hard alloy materials such as valves, valves, gear grinding, rough jade surface grinding.
 

W40: Very thick, about 400 mesh. Contains drilling oil! Suitable for hard polishing
Alloy steel, high carbon steel and other high hard materials, such as valve flange sliding door, gear load machine grinding.
W28: Very thick, about 600 mesh. Suitable for surfaces of relatively rough jade or metal
Coarse polishing, high efficiency! (Used with wool wheel)
W20: Very thick, about 1000 mesh. Suitable for surfaces of relatively rough jade or metal
Coarse polishing, high efficiency!
W10: Thicker, about 1500 mesh. Suitable for surfaces of relatively rough jade or metal
Coarse casting efficiency is higher! (Used with wool wheel)
W7: Fine, about 3000 mesh. Generally used for rough throwing of jade or metal, efficiency
High! (Used with wool wheel)
W5: Fine, about 4000 mesh. Generally used for rough throwing of jade or metal, efficiency
High! (Used with wool wheel)
W3.5: Finer, about 6000 mesh. Normal jade jade agate polishing with, you can
To achieve satisfactory results, is to use more than one model! (Used with wool wheel or wool tip)
W2.5: Finer, about 8000 mesh. W2.5 is suitable for tungsten carbide and other metals
The polishing of the surface! (Used with wool wheel or wool tip)
W1.5: Very fine, about 10,000 mesh. Normal jade jade agate or carbide
After polishing with W3.5 and W2.5, use W1.5 to achieve a mirror effect. (Used with yellow cloth wheel)
W1: Very fine, about 15,000 mesh. Generally used for jade fine throwing, high efficiency!
(Used with wool)
W0.5: Very fine, 20,000 mesh. Suitable for jade, jade, agate, crystal, etc
Baby smooth surface high light precision polishing! (Used with cowhide rings)


 

Our company has three brands: XINRUIDIAMOND  XIAOMOFANG DIMING

• Established in 1990, Zhecheng County Xinrui Diamond Tools Company Limited. (former Zhecheng County Jingxin Super abrasive Products Company Limited.) is located in Zhe Cheng County, Henan Province, the township of man-made diamonds in Henan Province, China, covering an area of 26,000 square meters.
• Since its establishment, it has focused on the production, research and development, and sales of diamond powder and abrasive tools.
• The main products are artificial diamond micro powder, diamond super fine powder, diamond shaping material, diamond crushing material, electroplated diamond, diamond soft grinding piece, diamond grinding paste, diamond tool tip, diamond saw blade,diamond disk diamond polycrystalline composite piece PCD ,The elastic grinding block,abrasive disc cutter,diamond grinding wheel,lab grown diamond,Opening tool and so on.
• The products are applicable to stone, machinery, electronics, aviation, geology and other fields, is grinding and polishing gems, optical instruments, glass, ceramics tools of choice.
• The company can carry on the special custom processing service according to the user's specific request.
• We have advanced equipment and instruments to check for you.
• Professional r & D personnel accompany you to make progress together.
• Excellent production personnel control the details.
• Sincere service attitude, sunny enterprise atmosphere.
• We take the slogan of "sincerity, pursuit and excellence" as our duty to help you solve problems.
• Xinrui Diamond is looking forward to meeting you.

1. Q: How do we guarantee quality?
A: Always have a pre-production sample before mass production; Always carry out final inspection before shipment;

2. Q: How can I place an order with us?
A: First of all, contact us, make an inquiry and get a quote within 24 hours. Next, we will send the product to you by the appropriate logistics method after receiving your payment. Finally, you will receive the product in about 2 to 4 working weeks.

3. Q: How can I visit your company and inspect the products?
A: Take a plane to Zhengzhou Xinzheng International Airport. We will pick you up at the airport and help you book your hotel. All free services.
4.Q: What can you buy from us?
A: Diamond powder, Diamond Polishing Pad, Diamond Grinding Wheel, Diamond Core Bit, lapping paste, synthetic diamond
5.Q: Why should you buy from us not from other suppliers?
A: Our core team had been in the business line of diamond tools for more than 20years, and 20 years rich experience in manufacturing and supplying all kinds of Diamond Tools.     We are keep improving our technology and capacity.     We are focus and professional.
6. Q: How do I pay?
A: The payment methods include telegraphic transfer, Western Union, Bank of China, etc. The specific payment method is determined according to the result of communication between the two parties. If you come to China, you can pay in cash. You can also transfer

7.Q: How do you ship the goods and how long will it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 7-30 days to arrive. Air and sea freight may be optional.