WESPEC Original DC62DR Diesel Generator Parts Electric Controller Module

Product Specification

WESPEC Original DC62DR Diesel Generator Parts Electric Controller Module

Summary

DC6xD series configuration and instructions original Product for Diesel/Gasoline/Gas Genset Parameters Monitor DC60D Generator Set Controller
Genset Controller DC60D Series
- This series controller is specialized for Diesel / Gasoline / Gas Genset Start, Stop,Parameters monitoring, faults-checking as
well as data setting.
- 4.3 inch colorful LCD screen display with brand new UI design is adapted in this controller that the relative failures can be
displayed directly. All the parameters can be displayed by simulated indicators and words.Besides, LCD screen can display various
faults in the same time that the genset will be stopped once it can not work smoothly.
- There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be
configured through the front face buttons or use programmable interface by RS485 or USB to adjust via PC.It can be widely applied
for all kinds of auto control system of gensets.
Performance and characteristics
The DC6xD series is available in four models:
DC60D: used for stand-alone automation, which controls the automatic start and stop of the generator set by remote start signal;
DC62D: Adding the mains monitoring and mains/generation automatic switching control (AMF) function on the basis of DC60D, it is
applicable to the single-machine automation system consisting of one generator unit.
DC60DR: Add RS485 interface based on DC60D;
DC62DR: Add RS485 interface based on DC62D;

Main Features
- 32 units Micro-procession technology is used.
- 4.3 inch TFT colorful big screen LCD, option language interface(Chinese/English), user’s language set if necessary.
- Indicator and number display through UI surface.
- Acrylic material is adapted to protect the screen.
- Silicone panels;
- USB Port: parameters can be set even without power through USD port to monitor in real time.
- Various kinds of parameters display.
- Input/output function, status can be shown directly.
- More categories of surface setting.
- Real time clock inside: preset time operate and auto maintenance is available. Genset working plan can be set as per week or
month.
- Three class protection countdown function, which can set the maintenance time or date.
- Records function: relative faults shall be recorded in real time.
- Totally 6 relay’s output, among which 4 relay output can be self-configurable, each relay can be set as max 25 functions,
besides, there are 4 groups as non-contact terminals.
- 5 switch value input, and each can be set as max 30 functions.
- 3 sensor simulation input connectors, 6 input types is configurable and various kinds of units can be set.
- Battery charging control function,which can protect the battery according to battery voltage status.
- Sensor can be self-defined by front face button or PC software.
- Adapt to 3P4W,1P2W,2P3W(120V/240V,50/60HZ)
- Various of crank conditions(RPM,Frequency, Oil Pressure) can be chosen
- Control Protection:Auto Start/Stop of genset,load transfer (ATS control) and perfect failure display and protection.
- Standard water-proof rubber gasket. The waterproof can reach IP54
- Module design: All the connections are adapted with European connectors so that installation, connection, repair and replacement
can be more easily.