ICE40 UltraPlus CPLD PLD Family Field Programmable Gate Array ICE40UP5K-SG48I

Product Specification

CPLD FPGA iCE40 UltraPlus Family Field Programmable Gate Array ICE40UP5K-SG48I

General Description 
iCE40 UltraPlus™ family from Lattice Semiconductor is 
an ultra-low power FPGA and sensor manager 
designed for ultra-low power mobile applications, such 
as smartphones, tablets and hand-held devices. iCE40 
UltraPlus is compatible with Lattice's iCE40 Ultra family 
devices, containing all the functions iCE40 Ultra family 
has except the high current IR LED driver. In addition, 
the iCE40 UltraPlus features an additional 1 Mb SRAM, 
additional DSP blocks, with additional LUTs, all which 
can be used to support an always-on Voice Recognition 
function in the mobile devices, without the need to 
keep the higher power consuming voice codec on all 
the time. 
The iCE40 UltraPlus family includes integrated SPI and 
I2C blocks to interface with virtually all mobile sensors 
and application processors. In addition, the iCE40 
UltraPlus family also features two I/O pins that can 
support the interface to I3C devices. There are two  
on-chip oscillators, 10 kHz and 48 MHz, the LFOSC 
(10 kHz) is ideal for low power function in always-on 
applications, while HFOSC (48 MHz) can be used for 
awaken activities. 
The iCE40 UltraPlus family also features DSP functional 
block to off-load Application Processor to pre-process 
information sent from the mobile device, such as voice 
data. The RGB PWM IP, with the three 24 mA constant 
current RGB outputs on the iCE40 UltraPlus provides 
all the necessary logic to directly drive the service LED, 
without the need of external MOSFET or buffer. 
The iCE40 UltraPlus family of devices are targeting for 
mobile applications to perform all the functions in 
iCE40 Ultra devices, such as Service LED, GPIO 
Expander, SDIO Level Shift, and other custom 
functions. In addition, the iCE40 UltraPlus family 
devices are also targeting for Voice Recognition 
application. 
The iCE40 UltraPlus family features two device 
densities, 2800 to 5280 Look Up Tables (LUTs) of logic 
with programmable I/Os that can be used as either 
SPI/I2C interface ports or general purpose I/O’s. Two of 
the iCE40 UltraPlus I/Os can be used to interface to 
higher performance I3C. It also has up to 120 kb of 
Block RAMs, plus 1024 kb of Single Port SRAMs to work 
with user logic. 
1.1. Features 
 Flexible Logic Architecture 
 Two devices with 2800 to 5280 LUTs 
 Offered in WLCS and QFN packages 
 Ultra-low Power Devices 
 Advanced 40 nm low power process 
 As low as 100 µA standby current typical 
 Embedded Memory 
 Up to 1024 kb Single Port SRAM 
 Up to 120 kb sysMEM™ Embedded Block RAM 
 Two Hardened I2C Interfaces 
 Two I/O pins to support I3C interface 
 Two Hardened SPI Interfaces 
 Two On-Chip Oscillators 
 Low Frequency Oscillator – 10 kHz 
 High Frequency Oscillator – 48 MHz 
 24 mA Current Drive RGB LED Outputs 
 Three drive outputs in each device 
 User selectable sink current up to 24 mA 
 On-chip DSP 
 Signed and unsigned 8-bit or 16-bit functions 
 Functions include Multiplier, Accumulator, and 
Multiply-Accumulate (MAC) 
 Flexible On-Chip Clocking 
 Eight low skew global signal resource, six can 
be directly driven from external pins 
 One PLL with dynamic interface per device 
 Flexible Device Configuration 
 SRAM is configured through: 
 Standard SPI Interface 
 Internal Nonvolatile Configuration Memory 
(NVCM) 
 Ultra-Small Form Factor 
 As small as 2.11 mm × 2.54 mm 
 Applications 
 Always-On Voice Recognition Application 
 Smartphones 
 Tablets and Consumer Handheld Devices 
 Handheld Commercial and Industrial Devices 
 Multi Sensor Management Applications 
 Sensor Pre-processing and Sensor Fusion 
 Always-On Sensor Applications 
 USB 3.1 Type C Cable Detect / Power Delivery 
Applications

Packaging and transportation instructions

- According to the standard export packaging.

Customers can choose from cartons, wooden cases and wooden pallets according to their own requirements.

Q&A

1. How to obtain the price?

We usually quote within 24 hours after receiving your inquiry (except weekends and holidays). If you are in urgent need of a price, please send us an email or contact us in any other way so that we can provide you with a quotation.

2. What is your delivery time?

This depends on the quantity of the order and the season in which you place the order. Usually, we can ship the goods within 7 to 15 days (for small batches), and for large batches, it takes about 30 days.

3. What are your payment terms?

Factory price, 30% deposit, 70%T/T payment before shipment.

4. What is the mode of transportation?

It can be transported by sea, air or express delivery (EMS, UPS, DHL, TNT, FEDEX, etc.). Please confirm with us before placing an order.

5. How do you help our business establish a long-term and good relationship?

We maintain good quality and competitive prices to ensure that our customers benefit.

2. We respect every customer as our friend. We do business with them sincerely and make friends with them, no matter where they come from.