Wireless 10dBm RF Integrated Circuits Transceiver AR8035-AL1A

Product Specification

Wireless Transceiver chip Integrated 10/100/1000 Gigabit Ethernet Transceiver AR8035-AL1A

 General Description
 The AR8035 is part of the Arctic family of 
devices - which includes the AR8031, AR8033, 
and the AR8035. It is Atheros’ 4th generation, 
single port 10/100/1000 Mbps Tri-speed 
Ethernet PHY. It supports RGMII interface to 
the MAC.™
 The AR8035 provides a low power, low BOM 
(Bill of Materials) cost solution for 
comprehensive applications including 
consumer, enterprise, carrier and home 
networks such as PC, HDTV, Gaming 
machines, Blue-ray players, IPTV STB, Mdia 
Players, IP Cameras, NAS, Printers, Digital 
Photo Frames, MoCA/Homeplug 
(Powerline)/EoC/ adapters and Home Router 
& Gateways, etc.
 The AR8035 integrates Atheros latest Green 
Ethos® power saving technologies and 
significantly saves power not only during work 
time, but also during overtime. Atheros Green 
Ethos® power savings include ultra-low power 
in cable unplugged mode or port power down 
mode, and automatic optimized power saving 
based on cable length. Furthermore, the 
AR8035 supports Wake-on-LAN (WoL) feature 
to be able to help manage and regulate total 
system power requirements.
 The AR8035 embeds CDT (Cable Diagnostics 
Test) technology on-chip which allows 
customers to measure cable length, detect the 
cable status, and identify remote and local PHY 
malfunctions, bad or marginal patch cord 
segments or connectors. Some of the possible 
problems that can be detected include opens, 
shorts, cable impedance mismatch, bad 
connectors, termination mismatch, and a bad 
transformer.
 The AR8035 also integrates a voltage regulator 
on chip. It reduces the termination R/C 
circuitry on both the MAC interface (RGMII) 
and line side.
 The AR8035 supports IEEE 802.3az Energy 
Efficient Ethernet (EEE) standard and Atheros 
proprietary SmartEEE, which allows legacy 
MAC/SoC devices without 802.3az support to 
function as the complete 802.3az system. The 
key features supported by the device are:
 n 10BASE-Te PHY supports reduced transmit 
amplitude.
 n 100BASE-Tx and 1000BASE-T use Low 
Power Idle (LPI) mode to turn off unused 
analog and digital blocks to save power 
while data traffic is in idle.
 Features
 n 10BASE-Te/100BASE-Tx/1000 BASE-T 
IEEE 802.3 compliant
 n Supports 1000 BASE-T PCS and auto
negotiation with next page support
 n Supports RGMII interface to MAC devices 
with a broad I/O voltage level options 
including 2.5V, 1.8V and 1.5V, and is 
compatible with 3.3V I/O
 n RGMII timing modes support internal delay 
and external delay on Rx path
 n Error-free operation up to 140 meters of 
CAT5 cable
 n Supports Atheros latest Green Ethos® 
power saving modes with internal 
automatic DSP power saving scheme
 n Supports 802.3az (Energy Efficient Ethernet)
 n Fully integrated digital adaptive equalizers, 
echo cancellers, and near end crosstalk 
(NEXT) cancellers
 n Supports Wake-on-LAN (WoL) to detect 
magic packet and notify the sleeping system 
to wake up
 n A robust Cable Discharge Event (CDE) 
tolerence of ± 6kV
 n A robust surge protection with ±750V/
 differential mode and ±4KV/common 
mode
 n Jumbo Frame support up to 10KB (full 
duplex)
 n All digital baseline wander correction
 n Automatic channel swap (ACS)
 n Automatic MDI/MDIX crossover
 n Automatic polarity correction
 n IEEE 802.3u compliant Auto-Negotiation
 n Software programmable LED modes
 n Multiple Loopback modes for diagnostics

Packaging and transportation instructions

- According to the standard export packaging.

Customers can choose from cartons, wooden cases and wooden pallets according to their own requirements.

Q&A

1. How to obtain the price?

We usually quote within 24 hours after receiving your inquiry (except weekends and holidays). If you are in urgent need of a price, please send us an email or contact us in any other way so that we can provide you with a quotation.

2. What is your delivery time?

This depends on the quantity of the order and the season in which you place the order. Usually, we can ship the goods within 7 to 15 days (for small batches), and for large batches, it takes about 30 days.

3. What are your payment terms?

Factory price, 30% deposit, 70%T/T payment before shipment.

4. What is the mode of transportation?

It can be transported by sea, air or express delivery (EMS, UPS, DHL, TNT, FEDEX, etc.). Please confirm with us before placing an order.

5. How do you help our business establish a long-term and good relationship?

We maintain good quality and competitive prices to ensure that our customers benefit.

2. We respect every customer as our friend. We do business with them sincerely and make friends with them, no matter where they come from.