133MHz 8SOIC NOR FLASH 128Mbit SPI Quad I/O QPI W25Q128JVSIQ

Product Specification

FLASH NOR Memory IC 128Mbit SPI Quad I/O QPI 133MHz 8SOIC W25Q128JVSIQ

1. GENERAL DESCRIPTIONS 
The W25Q128JV (128M-bit) Serial Flash memory provides a storage solution for systems with limited 
space, pins and power. The 25Q series offers flexibility and performance well beyond ordinary Serial Flash 
devices. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP) 
and storing voice, text and data. The device operates on a single 2.7V to 3.6V power supply with current 
consumption as low as 1µA for power-down. All devices are offered in space-saving packages. 
The W25Q128JV array is organized into 65,536 programmable pages of 256-bytes each. Up to 256 bytes 
can be programmed at a time. Pages can be erased in groups of 16 (4KB sector erase), groups of 128 
(32KB block erase), groups of 256 (64KB block erase) or the entire chip (chip erase). The W25Q128JV 
has 4,096 erasable sectors and 256 erasable blocks respectively. The small 4KB sectors allow for greater 
flexibility in applications that require data and parameter storage. (See Figure 2.)  
The W25Q128JV supports the standard Serial Peripheral Interface (SPI), Dual/Quad I/O SPI: Serial 
Clock, Chip Select, Serial Data I/O0 (DI), I/O1 (DO), I/O2 and I/O3. SPI clock frequencies of W25Q128JV 
of up to 133MHz are supported allowing equivalent clock rates of 266MHz (133MHz x 2) for Dual I/O and 
532MHz (133MHz x 4) for Quad I/O when using the Fast Read Dual/Quad I/O. These transfer rates can 
outperform standard Asynchronous 8 and 16-bit Parallel Flash memories. 
Additionally, the device supports JEDEC standard manufacturer and device ID and SFDP, and a 64-bit 
Unique Serial Number and three 256-bytes Security Registers. 
2. FEATURES 
 New Family of SpiFlash Memories                                                                                                                             – W25Q128JV: 128M-bit / 16M-byte – Standard SPI: CLK, /CS, DI, DO – Dual SPI: CLK, /CS, IO0, IO1 – Quad SPI: CLK, /CS, IO0, IO1, IO2, IO3 – Software & Hardware Reset(1)   
 Highest Performance Serial Flash  – 133MHz Single, Dual/Quad SPI clocks – 266/532MHz equivalent Dual/Quad SPI – 66MB/S continuous data transfer rate – Min. 100K Program-Erase cycles per sector  – More than 20-year data retention 
 Efficient “Continuous Read”  – Continuous Read with 8/16/32/64-Byte Wrap – As few as 8 clocks to address memory – Allows true XIP (execute in place) operation 
 Low Power, Wide Temperature Range – Single 2.7 to 3.6V supply – <1µA Power-down (typ.) – -40°C to +85°C operating range – -40°C to +105°C operating range 
 Flexible Architecture with 4KB sectors – Uniform Sector/Block Erase (4K/32K/64K-Byte) – Program 1 to 256 byte per programmable page – Erase/Program Suspend & Resume 
 Advanced Security Features – Software and Hardware Write-Protect – Power Supply Lock-Down  – Special OTP protection – Top/Bottom, Complement array protection – Individual Block/Sector array protection – 64-Bit Unique ID for each device – Discoverable Parameters (SFDP) Register – 3X256-Bytes Security Registers with OTP locks – Volatile & Non-volatile Status Register Bits 
 Space Efficient Packaging – 8-pin SOIC 208-mil   – 16-pin SOIC 300-mil (additional /RESET pin) – 8-pad WSON 6x5-mm / 8x6-mm  – 24-ball TFBGA 8x6-mm (6x4/5x5 ball array) – 24-ball WLCSP – Contact Winbond for KGD and other options  
Note: 1. Hardware /RESET pin is only available on 
TFBGA or SOIC16 packages

Packaging and transportation instructions

- According to the standard export packaging.

Customers can choose from cartons, wooden cases and wooden pallets according to their own requirements.

Q&A

1. How to obtain the price?

We usually quote within 24 hours after receiving your inquiry (except weekends and holidays). If you are in urgent need of a price, please send us an email or contact us in any other way so that we can provide you with a quotation.

2. What is your delivery time?

This depends on the quantity of the order and the season in which you place the order. Usually, we can ship the goods within 7 to 15 days (for small batches), and for large batches, it takes about 30 days.

3. What are your payment terms?

Factory price, 30% deposit, 70%T/T payment before shipment.

4. What is the mode of transportation?

It can be transported by sea, air or express delivery (EMS, UPS, DHL, TNT, FEDEX, etc.). Please confirm with us before placing an order.

5. How do you help our business establish a long-term and good relationship?

We maintain good quality and competitive prices to ensure that our customers benefit.

2. We respect every customer as our friend. We do business with them sincerely and make friends with them, no matter where they come from.