BMW Vehicle Ceramic Brake Pads Sport Utility 60,000 Km Warranty

Product Specification

BMW Vehicle Ceramic Brake Pads Sport Utility 60,000 Km Warranty

Passenger car brake pad features
● Excellent and stable braking performance

● Excellent heat resistance, excellent braking performance even at high temperatures

● Small damage to the disc, do not often replace the disc

● It is not easy to have sound or noise
wear resistance, can run longer mileage

● Metal free, stable performance in extreme cold and hot climate

Less Metallic or Ceramic Brake Pads Sport Utility & Multi-Purpose Vehicles

Partners of BAIYUN Passenger Car Disc Brake Pads
Fiat Group (Alfa Romeo, Chrysler, Ferrari, Fiat, Lancia) | Ford Motor Company (Aston Martin, Ford, Mazda) | BYD Auto | Chang’an | Chassis Brakes International | Chery | Continental Teves | Dac | Daewoo | Daimler AG (Mercedes-Benz, AMG) |Advics | Akebono | APG-FTE | BAIC Group | BMW Group (BMW, BMW M GmbH, Rolls-Royce) | Brembo | Brilliance | GAC Group | Geely (Geely, Volvo) | GM (Chevrolet, Opel, Vauxhall) | Great Wall | Haima | Honda | JMC | Land Rover | Mando | McLaren | Mitsubishi | Nissin Brake | PSA Group| Qoros | Renault-Nissan (Renault, Nissan, Dacia) | SAIC | Suzuki | Tata | Toyota | TRW | VW Group

Automatic Weighing& Mixing System of Ceramics Brake Pads & Low Metallic Brake Pads

Adopting the full automatic weighing& mixing system with computer display and control. Before feeding raw material, there is bar code scanning to avoid wrong material feeding. The afterwards weighing, delivery, mixing, separate are all automatic. The formula quality is guaranteed, labor load is reduced.
Equal ratio pressure hot pressing unit
Features:

● Each station’s hydraulic and electric controlled separately.

● Each station 4-8 antrum molds are equal ratio pressed. Same density of every pad is guaranteed.

● All process parameters display on screen.

● Real-time online control. Fault & overlimit will result in automatic alarming.

Equal ratio pressure hot pressing unit

Features:

● Each station’s hydraulic and electric controlled separately.

● Each station 4-8 antrum molds are equal ratio pressed. Same density of every pad is guaranteed.

● All process parameters display on screen.

● Real-time online control. Fault & overlimit will result in automatic alarming.

Heat treatment:

● Intelligent digital display temperature control instrument, PID parameters self-adjusting, solid-state relay, the heating process is done automatically.

● Independent super temperature automatic alarming system

● Real-time supervision, trend chart is done automatically, easy for fault solving.

Passenger Car Bench Test Machine

Disc brakes are generally used in passenger cars, but due to their stable performance at higher speeds and resistance to brake fade, they are gradually spreading into the commercial vehicle segment, where drum brakes were traditionally chosen for their longer service life. There is increasing demand from customers for longer service life and higher quality, and Baiyun is committed to meeting them through further development of the disc brake’s reliability. There are two types of disc brakes.

The "opposed piston type disc brake" has pistons on both sides of the disc rotor, while the "floating type disc brake" has a piston on only one side. Floating caliper type disc brakes are also called sliding pin type disc brakes.

Friction Materials

1, Friction Raw Material

2,Types of friction materials


3, Friction Material of Baiyun


4, Manufacturing process of friction materials

 

Less Metallic or Ceramic Brake Pads Sport Utility & Multi-Purpose Vehicles

​