Changzhou DLX Alloy Co., Ltd.
| Grade | None — construction per drawing (no grade designation) |
| Surface | Clean, oxide-free for consistent weld quality |
| Standards | Per drawing; nickel cladding aligned with ASTM B162 / GB/T 2072-2020 where applicable |
| Supply Ability | 500 tons per month |
| Construction | Single or double-side nickel cladding, per drawing |
| Payment Terms | L/C,D/A,D/P,T/T |
| Delivery | 7-15 days, export packaging |
| Delivery Time | 7-10 work days |
| Custom Sizing | Thickness, width, length and clad ratio per drawing |
| Product Form | Copper-nickel composite strip (Cu core, Ni cladding) |
| Low MOQ | Small minimum order to start; trial orders welcome |
| Trial Support | Samples and small-batch trial orders before series production |
| Certification | ISO9001, SGS, EN 10204 3.1 MTC on request |
View Detail Information
Explore similar products
High Strength 90/10 CuNi Busbar For Marine Electrical Systems ASTM B122 DIN 2
0.05-0.5mm Copper Nickel Composite Strip for Lithium Battery Tabs with High
CuNi10/CuNi30 Copper Nickel Alloy Strip High Conductivity Corrosion Resistant
400 MPA 50mm CuNi34 Resistance Heating Rod CuNi Alloy
Product Specification
| Grade | None — construction per drawing (no grade designation) | Surface | Clean, oxide-free for consistent weld quality |
| Standards | Per drawing; nickel cladding aligned with ASTM B162 / GB/T 2072-2020 where applicable | Supply Ability | 500 tons per month |
| Construction | Single or double-side nickel cladding, per drawing | Payment Terms | L/C,D/A,D/P,T/T |
| Delivery | 7-15 days, export packaging | Delivery Time | 7-10 work days |
| Custom Sizing | Thickness, width, length and clad ratio per drawing | Product Form | Copper-nickel composite strip (Cu core, Ni cladding) |
| Low MOQ | Small minimum order to start; trial orders welcome | Trial Support | Samples and small-batch trial orders before series production |
| Certification | ISO9001, SGS, EN 10204 3.1 MTC on request |
New materials earn trust in small steps — a sample to verify, a trial order to validate, then volume. This copper-nickel composite strip is built that way: start with a small order, confirm the construction, then scale. The strip pairs a copper core for low electrical resistance with nickel cladding for weldability and corrosion protection. No grade designation applies; construction, clad ratio and dimensions are per drawing. Every batch is inspected and documented, at every order size.
| Parameter | Value | Note |
|---|---|---|
| Construction | Copper core, nickel cladding | single or double-side, per drawing |
| Clad ratio | Per drawing | confirmed at order |
| Thickness | Per drawing | core + cladding layers |
| Width / length | Per drawing | strip form, per order |
| Tolerances | Per drawing | locked at order confirmation |
Small MOQ to start; trial orders and samples welcome before series production.
Sample and small-batch trial orders are available before series production, so you can verify construction, weld behaviour and dimensions against your process. Once the trial order is qualified, the same specification carries into production volume.
| Layer | Role |
|---|---|
| Copper core | Low electrical resistance, current carrying |
| Nickel cladding | Corrosion resistance, weldable surface |
| Clad ratio | Confirmed per drawing |
Construction (single or double-side cladding), clad ratio, thickness, width, length and surface finish are all manufactured per drawing. Share the application and the drawing, and we confirm the strip specification before production.
| Item | Scope |
|---|---|
| Per-batch inspection | Dimensions, layers, surface against the drawing |
| ISO9001 | Quality management system, plant-wide |
| EN 10204 3.1 MTC | Available with shipment on request |
| Traceability | Batch records for every delivery |
Strip is packaged for export with edge and surface protection. Lead time is 7-15 days, and shipping documents and inspection records accompany every delivery.
This composite carries no grade designation and is quoted per drawing, based on construction (single or double-side cladding), clad ratio, dimensions and quantity. No indicative price range is published for this product — request a quotation with your drawing for a firm price.
| Core material | Copper |
| Cladding material | Nickel |
| Cladding | Single or double-side, per drawing |
| Clad ratio | Per drawing |
| Composition record | Per-batch inspection per drawing |
Physical properties (density, electrical conductivity, tensile strength) depend on the core/clad ratio and layer thickness. Values are confirmed per drawing — no catalogue values are claimed for this composite.
| Form | Composite strip (Cu core, Ni cladding) |
| Grade | None (construction per drawing) |
| Size | Per drawing |
| Surface | Clean, oxide-free per drawing |
| Lead time | 7-15 days |
| Packaging | Export packaging per order |
| Dimensional tolerances | Per drawing |
| Nickel cladding family (where applicable) | ASTM B162 (Ni200/Ni201 strip); GB/T 2072-2020 (N4/N6 strip) |
| Composite verification | Per drawing, per-batch inspection |
Strip is packaged for export with edge and surface protection. Lead time: 7-15 days. Shipping documents and inspection records accompany every shipment.
Changzhou DLX Alloy Co., Ltd., established in 2002, operates a 12,000 m² factory rated at 1,200 tonnes per year. New materials earn trust in small steps: samples to verify, trial orders to validate, then series production. DLX supports that path with low-MOQ trial orders, per-batch inspection and documentation at every stage — so you can qualify the composite strip before committing to volume.
A: Yes. Small-batch trial orders and samples are welcome, so you can verify construction, weld behaviour and dimensions before committing to volume.
A: MOQ is kept small to start, confirmed per drawing. Trial orders are available before series production.
A: No — no grade designation applies. The specification is the construction: copper core, nickel cladding, clad ratio and dimensions, all per drawing.
A: Construction (single or double-side cladding), clad ratio, thickness, width, length and surface finish, all per drawing.
A: Per-batch inspection against the drawing with EN 10204 3.1 documentation on request; lead time 7-15 days with export packaging.
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2002
Total Annual:
1000000-120000000+
Employee Number:
100~150
Ecer Certification：
Verified Supplier
Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ... Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ...
Get in touch with us
Leave a Message, we will call you back quickly!