View Detail Information
Explore similar products
Bright Soft B3 345 MPA ASTM B574 Hastelloy Alloy
760 MPA UNS N10675 Bright Soft B3 Hastelloy Alloy
Hastelloy C276 Welded Seamless Pipe ASTM B619 B622 B474 B626 N10276 2.4819
Hastelloy B B2 B3 UNS N10001 N10675 Iron Steel Round Bar Rod Welding W.Nr. 2
Product Specification
| High Light | Hastelloy C276 precision strip ,Anti-pitting strip for heat exchanger ,0.3x200mm Hastelloy alloy strip | ||
Plate and frame heat exchangers operating in maritime, petrochemical, and flue gas desulfurization (FGD) plants demand raw materials that survive both extreme thermal cycles and severe chemical corrosion. Our 0.3mm x 200mm Hastelloy C276 precision strip solves premature heat transfer plate failure by delivering verified chemical homogeneity and microstructural stability.
Through state-of-the-art multi-roll precision cold rolling and automated slitting lines, each coil achieves uniform mechanical properties and burr-free edge quality. The micro-alloyed chemistry guarantees exceptionally low carbon and silicon levels, preventing intergranular carbide precipitation during welding and brazing of corrugated thermal plates.
![]()
| Parameter / Property | Specified Value / Range | Engineering Note |
|---|---|---|
| Product Form | Precision Cold-Rolled Strip / Coil | Slit ribbon or master coil |
| Material Grade | Hastelloy C276 (Nickel-Molybdenum-Chromium Alloy) | High purity vacuum induction melting (VIM+ESR) |
| Nominal Thickness | 0.30 mm (0.0118 in) | Thickness tolerance: ±0.005 mm |
| Nominal Width | 200 mm (7.87 in) | Slitting width tolerance: ±0.05 mm |
| Density | 8.89 g/cm³ | High thermal conduction efficiency |
| Melting Point | 1325°C – 1370°C | Excellent high-temperature structural retention |
| Delivery Condition | Bright Annealed (Soft Temper) / Work Hardened | Customized hardness upon request |
| Tensile Strength (Annealed) | ≥ 690 MPa | High burst pressure resistance |
| Yield Strength (0.2% Offset) | ≥ 283 MPa | Superior cold forming & deep drawing |
| Elongation (A50mm) | ≥ 40% | Crack-free stamping of chevron patterns |
| Surface Finish | 2B / Bright Annealed (Ra ≤ 0.20 μm) | Scratch-free, oil-free, mirror-clean finish |
| Edge Condition | Precision Slit Edge / Deburred Rounded Edge | Zero burr, safe for automated coil feeding |
Superior Anti-Pitting & Crevice Corrosion Resistance in Harsh Chlorides The synergistic balance of molybdenum (15-17%) and chromium (14.5-16.5%) combined with tungsten (3-4.5%) delivers an exceptionally high Pitting Resistance Equivalent Number (PREN > 65), rendering this strip practically immune to pitting attack in ferric chloride, cupric chloride, and chlorinated sea water.
Ultra-Tight Dimensional Tolerance & Deep Stamping Ductility Rolling down to a precise 0.3mm thickness with ±0.005mm micro-tolerances ensures even wall thickness across complex chevron corrugations and turbulent flow channels. With over 40% elongation, the material stamps smoothly without spring-back or micro-cracking.
High Weldability Without Sensitization Risk Ultra-low carbon and silicon composition halts grain boundary carbide and intermetallic phase precipitation during TIG, laser, or vacuum brazing processes, maintaining peak corrosion resistance right across the heat-affected zone (HAZ).
Flawless Defect-Free Surface for Enhanced Thermal Efficiency Tension-levelled and bright-annealed in protective hydrogen atmospheres, our 200mm wide strip features an ultra-smooth surface (Ra ≤ 0.20 μm) that discourages mineral scaling, biological fouling, and turbulent erosion.
![]()
![]()
![]()
![]()
Q1: Why is Hastelloy C276 preferred over standard stainless steels for heat exchanger plates?
A: Standard stainless steels and even standard austenitic alloys frequently suffer rapid localized pitting and stress corrosion cracking when exposed to chloride ions, brackish water, or acidic condensates. Hastelloy C276 contains substantial molybdenum, chromium, and tungsten additions, giving it extreme resistance to pitting, crevice attack, and reducing media under severe heat exchange conditions.
Q2: What thickness and width tolerances can DLX maintain on 0.3mm x 200mm strip?
A: On 0.3mm nominal thickness, we maintain high-precision tolerances of ±0.005mm (customizable to ±0.003mm for ultra-critical applications). Across the 200mm width, high-speed rotary slitting guarantees width tolerances within ±0.05mm with burr height controlled under 5% of material thickness.
Q3: Can this 0.3mm C276 strip withstand deep-drawing into corrugated plate profiles?
A: Yes. In the bright-annealed soft temper condition, our 0.3mm strip delivers over 40% elongation with uniform, fine equiaxed grain structure (ASTM 7–8 equivalent grain size control), ensuring smooth formability without tearing, orange peel effect, or excessive work-hardening during complex pattern forming.
Q4: What are the minimum order quantity (MOQ) and packaging options for international export?
A: We offer flexible dynamic MOQs based on coil specifications and stock raw material availability. Standard export packaging includes inner cardboard cores, rust-preventive moisture barrier wrapping, desiccant packs, and heavy-duty ISPM-15 compliant wooden boxes reinforced for ocean and air freight.
![]()
![]()
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2002
Total Annual:
1000000-120000000+
Employee Number:
100~150
Ecer Certification:
Verified Supplier
Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ... Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ...
Get in touch with us
Leave a Message, we will call you back quickly!