View Detail Information
Explore similar products
Permalloy 80 Soft Magnetic 1j79 FeNi79 Precision Alloy
Soft Magnetic 1j79 Permalloy 80 FeNi79 Iron Based Alloys
Soft Magnetic 1j79 Permalloy FeNi79 Iron Alloy
35mm Kovar 4J29 K94610 1.3981 Precision Alloy
Product Specification
| High Light | Constantan Resistance Wire 6J40 ,6J40 Precision Alloy Wire ,Constantan Wire for Instruments | ||
Premium 6J40 Constantan Resistance Wire is a specialized copper-nickel alloy engineered for high-precision electrical measuring apparatus and current-sensing applications. Featuring a nominal volume resistivity of 0.48 μΩ·m and an exceptionally low temperature coefficient of resistance (TCR), this material guarantees zero electrical drift across wide operational temperature ranges. Produced under strict melt-to-spool quality controls, DLX delivers ultra-fine to heavy-gauge wires with uniform bright-annealed surfaces and mirror-level dimensional accuracy.
![]()
6J40 Constantan (nominally 40% Nickel, balance Copper, with trace Manganese and Iron additives) is the premier resistance material for standard resistors, heavy-duty current shunts, and precision potentiometers. Its hallmark physical characteristic is an essentially flat resistance-versus-temperature curve around room and elevated ambient temperatures, eliminating measurement errors caused by self-heating.
Unlike commercial-grade wire, our premium 6J40 alloy undergoes ultra-pure vacuum induction melting (VIM) followed by controlled inert-gas continuous bright annealing. This ensures superior metallurgical homogeneity, consistent thermal EMF suppression against copper, and high oxidation resistance in both AC and DC instrumentation circuits.
![]()
| Element | Content (%) |
|---|---|
| Nickel (Ni) + Cobalt (Co) | 39.0 – 41.0 |
| Manganese (Mn) | 1.0 – 2.0 |
| Iron (Fe) | ≤ 0.50 |
| Carbon (C) | ≤ 0.05 |
| Silicon (Si) | ≤ 0.15 |
| Copper (Cu) | Balance |
| Property | Metric Value | Imperial / Notes |
|---|---|---|
| Nominal Electrical Resistivity (20°C) | 0.48 ± 0.03 μΩ·m | 288.7 Ω·circ.mil/ft |
| Temperature Coefficient of Resistance (TCR, 20°C to 100°C) | ± 15 × 10⁻⁶ / °C | Ultra-low thermal drift |
| Density | 8.90 g/cm³ | 0.322 lb/in³ |
| Melting Temperature | 1220 – 1280 °C | 2228 – 2336 °F |
| Thermal Conductivity (20°C) | 21.8 W/(m·K) | Rapid heat dissipation |
| Coefficient of Thermal Expansion (20°C–100°C) | 15.2 × 10⁻⁶ / K | Matches ceramic bobbins |
| Thermal EMF vs. Copper (0°C to 100°C) | -40 to -45 μV/°C | Standard thermoelectric output |
| Max Operating Temperature in Air | 500 °C | Continuous service |
| Wire Diameter Range (mm) | Tensile Strength (MPa) | Elongation A100 (%) | Surface Condition |
|---|---|---|---|
| 0.025 mm – 0.10 mm | 400 – 520 | ≥ 12 | Bright Annealed / Enamelled |
| 0.10 mm – 0.50 mm | 420 – 540 | ≥ 15 | Bright Annealed / Spooled |
| 0.50 mm – 3.00 mm | 440 – 560 | ≥ 20 | Bright / Oxidized / Coiled |
| > 3.00 mm (Rod/Bar) | 450 – 580 | ≥ 25 | Pickled / Cold Drawn |
![]()
![]()
![]()
![]()
Q1: What makes 6J40 Constantan superior to standard Copper-Nickel alloys for instrument shunts?
A1: 6J40 is formulated with precise manganese and iron ratios that flatten the temperature-resistance curve across normal ambient working ranges (0°C to 100°C), resulting in a TCR of less than ±15 × 10⁻⁶ / °C. This prevents measurement distortion during prolonged electrical loading.
Q2: What wire diameter ranges and insulation options can be supplied?
A2: We supply bare solid round wire from 0.025 mm to 8.0 mm, flat resistance ribbons/strips, and polyurethane/enamel-coated magnet wire versions for high-density coil winding.
Q3: How do you ensure resistance uniformity across long spool lengths?
A3: Every continuous heat-treated run is monitored via inline dynamic resistance sensors and automated laser micrometer gauging to keep linear resistance variations within ±1.5% of specified values.
Q4: Can 6J40 Constantan be welded directly to Copper terminals?
A4: Yes. 6J40 exhibits clean fusion properties and can be joined using TIG, electron-beam welding, resistance spot welding, or standard silver soldering techniques.
Q5: What packaging is standard for ultra-fine gauges (e.g., < 0.05 mm)?
A5: Ultra-fine wire is wound with constant-tension spoolers onto high-impact plastic spools, shrink-wrapped with desiccants, and packed in multi-layered foam-padded export cartons to prevent transit deformation.
![]()
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2002
Total Annual:
1000000-120000000+
Employee Number:
100~150
Ecer Certification:
Verified Supplier
Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ... Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ...
Get in touch with us
Leave a Message, we will call you back quickly!