View Detail Information
Explore similar products
UNS N08811 Incoloy Alloy
Incoloy 800ht N08811 AMS 5766 Aluminum Chromium Alloy
AMS 5766 Corrosion Resistance UNS N08811 800ht Incoloy Alloy
AMS 5871 Incoloy Alloy
Product Specification
| High Light | Bright Annealed Incoloy 800 Wire ,Incoloy 800 Straight Wire 1.0-8.0mm ,Incoloy 800 Wire for Mesh Belts | ||
Incoloy 800 (Nickel-Iron-Chromium superalloy) straight wire is a premier structural material optimized for high-temperature thermal processing environments. Manufactured via vacuum induction melting followed by continuous protective atmosphere bright annealing, each wire length from 1.0mm to 8.0mm features a scale-free, mirror-like metallic luster, exceptional ductility for automated forming, and minimal internal stress. It maintains long-term structural integrity in carburizing, oxidizing, and nitriding atmospheres.
![]()
Incoloy 800 is formulated to resist high-temperature corrosion while retaining ductile mechanical properties during extended exposure to elevated temperatures. Below is the comprehensive technical parameter baseline:
| Key Technical Parameter | Value / Specification Metric | Engineering Context & Verification |
|---|---|---|
| Material Designation | Incoloy 800 (Ni-Fe-Cr Solid Solution Alloy) | High purity vacuum melted master heat |
| Standard Diameter Range | 1.0 mm – 8.0 mm | Continuous drawing with multi-pass precision dies |
| Diameter Tolerance | ±0.015 mm to ±0.03 mm | In-line dynamic dual-axis laser micrometer monitoring |
| Straightness Precision | ≤0.5 mm/m (Custom ≤0.3 mm/m) | Multi-roll precision rotary straightening |
| Surface Finish | Bright Annealed (Ra ≤0.4 μm) | Protective inert gas furnace treatment (Zero surface oxidation) |
| Chemical Balance | Ni: 30.0–35.0%, Cr: 19.0–23.0%, Fe: Balance | Al+Ti micro-alloying for structural stability |
| Tensile Strength (Rm) | 500 – 680 MPa | Annealed state ensuring optimal weaving formability |
| Yield Strength (Rp0.2) | ≥210 MPa | Prevents permanent sag under thermal loads |
| Elongation (A50mm) | ≥30% | High ductility preventing micro-cracking during bending |
| Density | 7.94 g/cm3 | High structural density |
| Continuous Operating Temp | Up to 1000∘C (1832∘F) | In air, endothermic gas, and protective atmospheres |
| Supplied Lengths | 500 mm – 4000 mm | Custom cut-to-length with burr-free end chamfering |
![]()
The synergistic combination of 30–35% Nickel and 19–23% Chromium forms a dense, self-healing chromium oxide (Cr2O3) surface barrier. This barrier strongly resists protective atmosphere degradation, carbon uptake in heat-treating furnaces, and internal scaling during continuous thermal cycling.
Processed in continuous hydrogen-protective atmosphere furnaces, our Incoloy 800 wire exhibits zero surface decarburization, completely clean metallic luster, and uniform grain refinement. The resulting low work-hardening rate ensures smooth feeding into automated spiral and rod-reinforced mesh belt weaving machinery without tool wear or wire jamming.
Utilizing multi-axis rotary mechanical straighteners and automated optical sensors, every straight wire achieves an exceptional straightness within ≤0.5 mm/m. Burr-free cut ends prevent snagging during high-speed mesh assembly and cross-rod resistance welding.
With balanced aluminum and titanium content, the alloy matrix resists grain boundary embrittlement and thermal shock during rapid furnace heating and cooling cycles, eliminating premature belt elongation and cross-rod warping.
![]()
Primary structural cross-rods, connecting pins, and spiral wire elements for continuous conveyor belts operating in carburizing, hardening, carbonitriding, and sintering furnaces.
Carrying elements and driving cross-rods for high-temperature sintering lines handling heavy mechanical parts under aggressive reducing atmospheres.
Furnace mesh belts for stainless steel and copper brazing lines, as well as glass tempering and ceramic firing tunnels requiring non-scaling wire surfaces.
Internal structural support frames, guide pins, and high-temperature thermal fixtures exposed to direct radiant heating up to 1000°C.
![]()
Changzhou DLX is a premier B2B manufacturer specializing in high-performance nickel and specialty alloy wire, strip, and precision components. Operating advanced vacuum melting, hot rolling, cold drawing, and continuous bright annealing production lines, we maintain a reliable global production capacity of 1,200 tons per month.
![]()
![]()
A: Unlike standard austenitic stainless steels that suffer from rapid oxidation, sigma phase embrittlement, and excessive creep elongation above 700°C, Incoloy 800 retains high creep-rupture strength, ductility, and structural stability in operating temperatures up to 1000°C. Its high nickel content prevents chloride stress-corrosion cracking and carburization in heat-treatment atmospheres.
A: Each batch is processed through continuous rotary precision straightening units paired with real-time laser alignment systems, ensuring straightness deviation within ≤0.5 mm/m. Continuous bright annealing in protective gas delivers an ultra-smooth, oxide-free surface (Ra ≤0.4 μm) ready for immediate welding and automated weaving.
A: As a dedicated B2B manufacturer, our MOQ is dynamically configured based on diameter specifications and customized cut-length requirements. Standard sizes typically ship within 7–15 working days, while customized dimensional tolerances or specific mechanical profiles are fulfilled under streamlined mill scheduling.
A: Yes. Due to high elemental purity and low impurity content, our Incoloy 800 wire exhibits outstanding weldability via TIG, MIG, and resistance welding without post-weld heat treatment, creating robust joint integrity under continuous cyclic thermal loads.
![]()
![]()
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2002
Total Annual:
1000000-120000000+
Employee Number:
100~150
Ecer Certification:
Verified Supplier
Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ... Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ...
Get in touch with us
Leave a Message, we will call you back quickly!