View Detail Information
Explore similar products
Nimonic 80A 8020 Nimonic 75 High Temperature Nickel Alloy
Nimonic 90 Pyromet 90 Udimet 90 High Temperature Aluminium Alloys
Nimonic C 263 5120 Haynes 263 High Temperature Nickel Alloy
Pyromet 90 High Temperature Nickel Alloy
Product Specification
| High Light | Aerospace-Grade Nimonic 90 Round Bar ,15mm Diameter Nickel Alloy Round Bar ,Turbine Blades Superalloy Round Bar | ||
Vacuum-refined precipitation-hardened nickel-chromium-cobalt superalloy round bar (15mm diameter), engineered specifically for high-stress aerothermal environments, gas turbine rotor blades, and high-temperature structural fasteners.
![]()
The Nimonic 90 Nickel Alloy Round Bar 15mm combines a high nickel-chromium base with approximately 18% cobalt and balanced titanium-aluminum additions to form a stable gamma-prime (γ′) precipitation-strengthening matrix. In aerospace gas turbine assemblies and industrial turbomachinery, rotor blades and high-pressure turbine vanes operate in continuous thermo-mechanical fatigue environments where conventional stainless steels and basic nickel alloys suffer rapid grain boundary deformation and thermal oxidation.
Our centerless ground 15mm bars feature ultra-clean internal microstructures, zero centerline segregation, and uniform grain sizing. Available in fully solution-treated or aged tempers, DLX Nimonic 90 bars provide consistent forgeability, tight dimensional repeatability for multi-axis CNC machining, and long-term surface integrity in severe oxidizing and sulfidizing atmospheres.
![]()
| Element | Content (Wt. %) | Element | Content (Wt. %) |
|---|---|---|---|
| Nickel (Ni) | Balance (~54.0 - 58.0%) | Titanium (Ti) | 2.00 - 3.00% |
| Chromium (Cr) | 18.00 - 21.00% | Aluminum (Al) | 1.00 - 2.00% |
| Cobalt (Co) | 15.00 - 21.00% | Iron (Fe) | ≤ 1.50% |
| Carbon (C) | 0.04 - 0.10% | Manganese (Mn) | ≤ 1.00% |
| Silicon (Si) | ≤ 0.80% | Copper (Cu) | ≤ 0.20% |
| Boron (B) | ≤ 0.020% | Zirconium (Zr) | ≤ 0.15% |
| Engineering Property | Typical Value / Metric |
|---|---|
| Density | 8.18 g/cm³ (0.296 lb/in³) |
| Melting Range | 1310°C - 1370°C |
| Continuous Service Temperature | Up to 920°C (1688°F) |
| Room Temp. Tensile Strength (Rm) | ≥ 1,150 MPa (Precipitation Hardened State) |
| Yield Strength (Rp0.2) | ≥ 750 MPa |
| Elongation at Break (A5) | ≥ 15% |
| Hardness (Heat Treated) | 320 - 380 HBW (Approx. 34 - 40 HRC) |
| Diameter Tolerance (15mm Bar) | Precision Ground h8 / h9 Class (+0/−0.027 mm) |
| Surface Finish | Bright Centerless Ground / Polished (Ra≤0.4 μm) |
![]()
![]()
![]()
![]()
Q1: What delivery condition is recommended for machining 15mm Nimonic 90 round bars into turbine blades?
A: For complex blade milling, contour turning, or drilling, we generally supply bars in the Solution-Treated condition (approx. 1080°C followed by air cooling). In this state, the alloy has lower hardness and superior chip-breaking characteristics. Once rough and semi-finish machining is complete, components can undergo precipitation hardening (aging at approx. 700°C–750°C) to achieve peak tensile and creep strength.
Q2: How does DLX ensure the internal structural integrity of 15mm round bars?
A: We implement 100% full-length ultrasonic immersion inspection and eddy-current testing on all precision-finished round bars to ensure zero subsurface micro-cracks, inclusions, or density irregularities.
Q3: Can DLX provide custom lengths and tighter diameter tolerances?
A: Yes. In addition to standard precision ground h8/h9 tolerances, DLX can customize centerless grinding down to h7/h6 tolerances upon request, as well as deliver precision cut-to-length billets (e.g., customized blade root slugs) with deburred ends.
Q4: What is the typical Minimum Order Quantity (MOQ) and lead time for 15mm Nimonic 90 bars?
A: We maintain flexible production schedules with an MOQ tailored to specific order requirements (typically starting at 5 kg for standard stock diameters or customized batch trial lots). Standard stocked batches ship within 3–7 business days, while custom melt-and-forge batches typically require 15–25 business days.
![]()
![]()
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2002
Total Annual:
1000000-120000000+
Employee Number:
100~150
Ecer Certification:
Verified Supplier
Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ... Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ...
Get in touch with us
Leave a Message, we will call you back quickly!