View Detail Information
Explore similar products
Nimonic 80A 8020 Nimonic 75 High Temperature Nickel Alloy
Nimonic 90 Pyromet 90 Udimet 90 High Temperature Aluminium Alloys
Nimonic C 263 5120 Haynes 263 High Temperature Nickel Alloy
Pyromet 90 High Temperature Nickel Alloy
Product Specification
| High Light | Nimonic 80A round bar ,precision ground nickel alloy bar ,turbine rotor blade alloy bar | ||
Engineered for extreme thermal stability and superior creep-rupture resistance up to 815°C, our vacuum-melted, precision ground Nimonic 80A round bar delivers uncompromising mechanical integrity for gas turbine rotor blades, marine exhaust valves, and critical nuclear bolting.
![]()
Our Nimonic 80A round bar delivers superior resistance to high-temperature oxidation and cyclic thermal fatigue. The alloy forms a protective, adherent chromium oxide layer at elevated operating temperatures, effectively preventing surface degradation under severe oxidizing combustion gases.
Through comprehensive in-house hot forging, solution annealing, precision straightening, and centerless grinding processes, every Nimonic 80A round bar achieves uniform gamma prime (γ′) phase distribution. This optimized microstructure guarantees exceptional structural stability under prolonged mechanical stresses at red-hot operating conditions.
Key metallurgical highlights include:
![]()
| Element | Content (wt%) | Function in Nimonic 80A Matrix |
|---|---|---|
| Nickel (Ni) | Balance (~68.0 - 74.0%) | Austenitic matrix, thermal stability & oxidation resistance |
| Chromium (Cr) | 18.00 – 21.00% | High-temperature corrosion and oxidation barrier |
| Titanium (Ti) | 1.80 – 2.70% | Primary gamma prime (γ′) precipitation hardener |
| Aluminum (Al) | 1.00 – 1.80% | Secondary precipitation strengthening & oxidation resistance |
| Iron (Fe) | ≤ 1.50% | Controlled residual matrix balance |
| Carbon (C) | 0.04 – 0.10% | Grain boundary carbide stabilization |
| Cobalt (Co) | ≤ 2.00% | Solid solution strengthening |
| Silicon (Si) | ≤ 0.80% | Melting deoxidizer |
| Manganese (Mn) | ≤ 0.40% | Hot workability enhancement |
| Sulfur (S) | ≤ 0.015% | Strictly minimized trace impurity |
| Property Parameter | Metric Value | Imperial / Notes |
|---|---|---|
| Density | 8.19 g/cm3 | 0.296 lb/in3 |
| Melting Range | 1320−1365∘C | 2410−2490∘F |
| Specific Heat (20∘C) | 448 J/(kg⋅K) | 0.107 Btu/(lb⋅∘F) |
| Thermal Conductivity (20∘C) | 12.3 W/(m⋅K) | High thermal dissipation efficiency |
| Electrical Resistivity (20∘C) | 1.24 μΩ⋅m | Matrix stability |
| Magnetic Permeability (20∘C) | <1.001 | Non-magnetic in all conditions |
| Mechanical Parameter | Room Temperature (20∘C) | High Temperature (700∘C) |
|---|---|---|
| Tensile Strength (Rm) | ≥1050 MPa | ≥720 MPa |
| Yield Strength (Rp0.2) | ≥680 MPa | ≥520 MPa |
| Elongation (A5) | ≥20% | ≥15% |
| Reduction of Area (Z) | ≥25% | ≥20% |
| Hardness (Brinell / Rockwell) | 300−360 HBW / 32−38 HRC | Fully heat-treated state |
| Stress Rupture Life | — | ≥100 hours at 700∘C/400 MPa |
![]()
![]()
![]()
![]()
A: Unlike standard stainless steels that lose yield strength rapidly above 550°C, the Nimonic 80A round bar is reinforced through coherent γ′ (Ni3(Al, Ti)) precipitate formation during aging. This microstructure allows it to maintain high tensile strength (>700 MPa) and superior creep resistance up to 815°C, preventing blade elongation under centrifugal force.
A: Our round bars are processed via automated centerless grinding machines, achieving precision tolerances within ISO h7/h8/h9 grades and surface roughness of Ra≤0.4 μm. This guarantees high circularity and straightness, minimizing tool chatter during downstream machining.
A: The standard two-stage heat treatment consists of:
A: All round bars undergo 100% immersion or contact Ultrasonic Testing (UT) combined with Eddy Current Surface Testing to ensure zero internal shrinkage, microporosity, or longitudinal crack defects.
A: Standard stocked bar sizes can be dispatched within 7–10 days. Custom forgings and tailored ground diameters typically require 3–4 weeks. All rods are coated with anti-rust protective oil, plastic capped at ends, vapor-barrier wrapped, and secured in reinforced fumigated wooden crates.
![]()
![]()
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2002
Total Annual:
1000000-120000000+
Employee Number:
100~150
Ecer Certification:
Verified Supplier
Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ... Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ...
Get in touch with us
Leave a Message, we will call you back quickly!