View Detail Information
Explore similar products
Monel Alloy K500 Corrosion Resistant Alloys Monel Stainless Steel Tube
Monel Steel Nickel Alloy Strip Monel 400 Astm
Monel Material Copper Nickel Alloy K500 Strip
DIN 2.4375 Nickel Based Alloy Monel K500 Round Bar
Product Specification
| High Light | Monel 400 round bar ,cold drawn Monel 400 ,Monel 400 propeller shaft | ||
High-integrity cold drawn Monel 400 round bars engineered specifically for critical marine propulsion shafting, marine pumps, and subsea hardware. Featuring a refined homogeneous nickel-copper solid solution matrix, these bright-finished precision bars deliver exceptional resistance to rapidly flowing seawater, cavitation erosion, and chloride-induced stress corrosion cracking without compromise.
Product OverviewMonel 400 is a ductile nickel-copper solid-solution alloy renowned for its superior metallurgical stability and broad-spectrum resistance to aggressive marine environments, brackish waters, and non-oxidizing acids. Through precision cold-drawing and specialized surface finishing processes, our Monel 400 round bars achieve outstanding straightness, tight outer diameter tolerances, and a clean, mirror-bright surface finish.
Designed to meet the stringent mechanical demands of naval architects and marine engineering contractors, our cold drawn bright bars exhibit elevated yield strength, low magnetic permeability across broad temperature ranges, and remarkable resistance to biofouling and de-alloying. Every batch undergoes comprehensive non-destructive examination (NDE) and microstructural analysis to ensure internal sound integrity for long-service-life rotating machinery.
![]()
![]()
| Element | Content Range (%) | Functional Role |
|---|---|---|
| Nickel (Ni + Co) | ≥ 63.0 | Solid solution matrix; primary corrosion resistance |
| Copper (Cu) | 28.0 - 34.0 | Enhances resistance to seawater, biofouling, and non-oxidizing acids |
| Iron (Fe) | ≤ 2.50 | Controlled microstructure stabilizer |
| Manganese (Mn) | ≤ 2.00 | Deoxidizer & hot-workability enhancer |
| Silicon (Si) | ≤ 0.50 | Deoxidation agent |
| Carbon (C) | ≤ 0.16 | Controlled to prevent carbide precipitation |
| Sulfur (S) | ≤ 0.024 | Strict limitation for grain boundary purity |
| Parameter | Value / Range | Engineering Advantage |
|---|---|---|
| Tensile Strength (Rm) | 585 - 790 MPa | High load capacity under dynamic torque |
| Yield Strength (Rp0.2) | 380 - 620 MPa | Resistance to permanent torsional deformation |
| Elongation (A5) | ≥ 15 - 25 % | Retains high shock and impact absorption |
| Hardness | 85 - 98 HRB / 160 - 220 HB | Wear-resistant surface for bearing sleeves |
| Density | 8.80 g/cm³ | High-density homogeneous solid solution |
| Curie Temperature | 21 - 49 °C | Low magnetic signature in ambient seawater |
| Thermal Expansion Coefficient | 13.9×10−6/K (20−100°C) | Thermal compatibility with bronze & steel housings |
| Available Diameters | Ø3.0 mm - Ø250.0 mm | Custom cutting & centerless ground sizing available |
![]()
![]()
![]()
A: While 316L stainless steel suffers from pitting, crevice corrosion, and biofouling-induced localized attack in stagnant or low-velocity seawater, Monel 400 forms an exceptionally adherent, self-healing protective copper-nickel oxide film. It provides practically zero pitting rates and complete immunity to chloride stress corrosion cracking, offering significantly longer maintenance-free service life for marine propulsion shafts.
Q2: What surface finish and dimensional tolerances can DLX Alloy provide for marine shafts?A: We supply Monel 400 bars in cold drawn bright finish, centerless ground, and precision polished conditions. We can achieve precision diameter tolerances down to h8, h9, or h11 standards, with surface roughness controlled to Ra≤0.4 μm to ensure minimal wear on marine bearings and shaft seals.
Q3: How is internal sound integrity guaranteed for heavy-torque rotating shaft applications?A: Every single bar intended for shafting service undergoes strict ultrasonic non-destructive testing (UT) and surface eddy current testing to ensure complete absence of internal voids, inclusions, shrinkage cavities, or surface micro-cracks before dispatch.
Q4: What are your minimum order quantities (MOQ) and production lead times for Monel 400 round bars?A: We offer dynamic MOQs tailored to your specific bar diameters, processing states, and cutting requirements. With our expansive 1,200 tons/month manufacturing scale and standard billet inventory, regular orders are dispatched rapidly, and customized cold-drawing runs are fulfilled within competitive industrial project schedules.
![]()
![]()
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2002
Total Annual:
1000000-120000000+
Employee Number:
100~150
Ecer Certification:
Verified Supplier
Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ... Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ...
Get in touch with us
Leave a Message, we will call you back quickly!