View Detail Information
Explore similar products
Monel Alloy K500 Corrosion Resistant Alloys Monel Stainless Steel Tube
Monel Steel Nickel Alloy Strip Monel 400 Astm
Monel Material Copper Nickel Alloy K500 Strip
DIN 2.4375 Nickel Based Alloy Monel K500 Round Bar
Product Specification
| High Light | Monel 400 spring wire ,acid proof Monel wire ,soft annealed Monel wire | ||
Changzhou DLX Alloy supplies precision-engineered Monel 400 Spring Wire specifically drawn and heat-treated for critical offshore valve assemblies. Combining natural resistance to chloride pitting, hydrogen embrittlement, and non-oxidizing acids with tailored soft-annealed ductility, our wire delivers consistent coiling performance and long-term elastic stability under severe marine pressure.
![]()
Offshore oil & gas extraction and marine process valves operate under some of the most aggressive environmental conditions in industrial engineering. Valve springs, seal energizers, and wave springs require alloy materials that resist both chemical corrosion and mechanical fatigue without catastrophic failure.
Our Acid Proof Monel 400 Spring Wire is cold drawn from ultra-refined nickel-copper ingots and continuously processed through controlled-atmosphere bright annealing. By maintaining strict chemistry control with optimal nickel-to-copper ratios and low residual impurities, we ensure that every spool provides uniform tensile strength, excellent cold-forming elasticity, and non-magnetic stability across cryogenic to moderate high-temperature environments.
![]()
| Element | Chemical Symbol | Target / Guaranteed Range (wt. %) |
|---|---|---|
| Nickel | Ni | ≥63.0% (Plus Cobalt) |
| Copper | Cu | 28.0%−34.0% |
| Iron | Fe | ≤2.5% |
| Manganese | Mn | ≤2.0% |
| Silicon | Si | ≤0.5% |
| Carbon | C | ≤0.3% |
| Sulfur | S | ≤0.024% |
| Parameter / Engineering Metric | Value / Specified Limit | Unit / Condition |
|---|---|---|
| Density | 8.80 | g/cm³ |
| Melting Point | 1300−1350 | °C |
| Curie Temperature | 21−49 | °C |
| Electrical Resistivity | ≈0.51 | μΩ·m (20°C) |
| Modulus of Elasticity (Young's) | 179 | GPa |
| Shear Modulus (Modulus of Rigidity) | 66 | GPa |
| Poisson's Ratio | 0.32 | — |
| Tensile Strength (Soft Annealed) | 480−620 | MPa |
| Yield Strength (0.2% Offset) | 170−310 | MPa |
| Elongation at Break (A50mm) | ≥35 | % |
| Hardness (Soft Annealed) | 65−85 | HRB (110−150 HV) |
| Surface Finish | Bright / Matte Custom | Defect-free, oxide-free |
| Diameter Tolerance Control | ±0.005 to ±0.02 | mm (Gauge-dependent) |
![]()
![]()
![]()
![]()
A: While 316L stainless steel is susceptible to chloride stress corrosion cracking and pitting in stagnant seawater or subsea crevices, Monel 400 provides a homogeneous nickel-copper solid solution that is practically immune to chloride attack and cavitation. It guarantees prolonged spring service life without sudden brittle failure.
A: Soft annealed wire provides maximum ductility and uniform grain structure, which is ideal for manufacturers coiling intricate compression, extension, or torsion springs. After coiling, the springs can be cold-worked or customized according to specific load-deflection profiles.
A: We manufacture custom diameters from 0.05 mm ultra-fine wire up to 12.0 mm heavy-duty wire. Dimensional tolerances are held strictly within micro-precision thresholds to prevent jam-ups on CNC spring formers.
A: Our wire drawing line employs multi-stage diamond dies and closed-loop ultrasonic cleaning, followed by in-line surface testing to ensure bright, smooth, oxide-free surfaces with zero burrs or draw marks.
![]()
![]()
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2002
Total Annual:
1000000-120000000+
Employee Number:
100~150
Ecer Certification:
Verified Supplier
Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ... Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ...
Get in touch with us
Leave a Message, we will call you back quickly!