View Detail Information
Explore similar products
Monel Alloy K500 Corrosion Resistant Alloys Monel Stainless Steel Tube
Monel Steel Nickel Alloy Strip Monel 400 Astm
Monel Material Copper Nickel Alloy K500 Strip
DIN 2.4375 Nickel Based Alloy Monel K500 Round Bar
Product Specification
| High Light | Monel 400 alloy strip ,0.1mm nickel alloy foil ,Monel foil for valve diaphragm | ||
Engineered for critical fluid control and sensitive pressure actuation, this 0.1mm Monel 400 precision strip provides an optimal balance of mechanical ductility, elastic stability, and severe environmental durability. Cold-rolled under tension-controlled multi-roll precision mills, our ultra-thin foil coils eliminate micro-cracking during deep drawing and stamping operations, ensuring long-term burst resistance and accurate deflection response in corrosive valve assemblies.
| Parameter / Specification | Details & Capability |
|---|---|
| Material Grade | Monel 400 (Nickel-Copper Solid-Solution Alloy) |
| Nominal Thickness | 0.10 mm (Custom range: 0.02 mm – 1.50 mm) |
| Thickness Tolerance | Up to ±0.002 mm ultra-tight precision control |
| Width Range | 3.0 mm – 350 mm (Precision slitted, burr-free edges) |
| Supply State / Temper | Deep Drawing Annealed (Soft), Quarter Hard (1/4H), Half Hard (1/2H), Full Hard (FH) |
| Primary Applications | Valve diaphragms, burst discs, pressure transmitters, bellows, chemical seals |
![]()
Valve diaphragms operating in marine, chemical, and oilfield environments face continuous cyclic stress combined with aggressive chemical exposure. Ordinary cold-rolled sheets frequently suffer from grain coarsening and anisotropic springback, causing premature fatigue rupture.
Our Monel 400 0.1mm ultra-thin foil coil is produced through vacuum induction melting followed by continuous tension annealing. This refined metallurgy guarantees a fully homogeneous, fine equiaxed grain structure (Grain Size ≥ Grade 8.5), delivering isotropic mechanical properties. Whether fabricated into flat, convoluted, or corrugated diaphragms, the material ensures consistent actuation repeatability, zero hysteresis loss, and superior service longevity under fluctuating pressures.
![]()
![]()
| Element | Weight Percentage (%) |
|---|---|
| Nickel (Ni) + Cobalt (Co) | ≥ 63.0% |
| Copper (Cu) | 28.0% – 34.0% |
| Iron (Fe) | ≤ 2.50% |
| Manganese (Mn) | ≤ 2.00% |
| Carbon (C) | ≤ 0.15% |
| Silicon (Si) | ≤ 0.50% |
| Sulfur (S) | ≤ 0.015% |
| Property / Parameter | Typical Value / Range | Unit |
|---|---|---|
| Tensile Strength (Rm) | 480 – 620 | MPa |
| Yield Strength (Rp0.2) | 195 – 340 | MPa |
| Elongation (A50mm) | ≥ 35 | % |
| Hardness | ≤ 75 HRB (130 – 160 HV) | HRB / HV |
| Density | 8.80 | g/cm3 |
| Melting Point | 1300 – 1350 | °C |
| Thermal Expansion Coefficient (20–100°C) | 13.9×10−6 | / K |
| Electrical Resistivity | 0.51 | μΩ⋅m |
![]()
![]()
![]()
A1: While stainless steels (such as 316L) are prone to severe chloride pitting and stress corrosion cracking in marine or acidic media, Monel 400 offers solid-solution nickel-copper chemistry that remains completely immune to chloride cracking. Furthermore, Monel 400 retains superior elastic consistency and fatigue resilience across wide temperature fluctuations from sub-zero to 450°C.
A2: DLX utilizes advanced multi-roll precision finishing mills equipped with real-time feedback thickness gauges. For 0.1mm Monel 400 strip, we consistently achieve a tolerance of ±0.002 mm to ±0.003 mm, ensuring precise actuation pressure thresholds in finished diaphragm assemblies.
A3: We implement precision hydrogen-atmosphere continuous annealing to produce an extra-fine, equiaxed grain structure (ASTM equivalent Grain Size 8.5–10) with an elongation rate exceeding 30%. This eliminates internal tensile residual stress, minimizing earing and edge micro-cracking during high-speed deep drawing or hydraulic forming.
A4: Coils are carefully wrapped in anti-corrosion VCI paper, vacuum-sealed with silica desiccant in poly-bags, and secured in export-grade wooden cases to prevent coil ovalization and surface oxidation. MOQ is dynamically tailored to specific slitting widths and thickness parameters to support both specialized prototype development and large-scale industrial runs.
![]()
![]()
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2002
Total Annual:
1000000-120000000+
Employee Number:
100~150
Ecer Certification:
Verified Supplier
Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ... Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ...
Get in touch with us
Leave a Message, we will call you back quickly!